Coatings- plastic - Import export

Epoxy Resins are reactive intermediates used to produce a versatile class of thermosetting polymers. They are characterized by the presence of a three-membered cyclic ether group commonly referred to as an epoxy group, 1,2-epoxide, or oxirane. The most widely used epoxy resins are diglycidyl ethers of bisphenol A derived from bisphenol A and epichlorohydrin. The outstanding performance characteristics of the thermosets derived from bisphenol A epoxies are largely conveyed by the bisphenol A moiety (toughness, rigidity, and elevated temperature performance), the ether linkages (chemical resistance), and the hydroxyl and epoxy groups (adhesive agents). In addition to bisphenol A, other starting materials such as aliphatic glycols and both phenol and o-cresol novolacs are used to produce specialty resins.

LINE-X of Europe provides LINE-X Bedliner material, equipment and training for new business partners across Europe. LINE-X is applied by specialist equipment and is a professional application.

Cable fasteners: Stainless steel 1.4404 or PVDF. Hose: Plastic. Version: Cable gland: bright stainless steel, transparent plastic. Hose: coated Note: Washers supplied. EN 60423 metric thread. IP rating 66, 68 up to 15 bar, 69K. Tension relief corresponds to EU standard 62444. EHEDG certified. Seal insert ADI - free Temperature range: Stainless steel cable glands: -40 °C to +85 °C. Plastic cable glands: -20 °C to +85 °C. Hose: -20 °C to +95 °C.

Additives for dispersing fillers/pigments in solvents, coatings and plastics.

Concrete base coated black plastic

Cement base plastic coated

KB RollerTech processes seamless metal belts (stainless steel and nickel). Compared to coated plastic belts, metal belts offer the following advantages: very high thermal conductivity very high physical stability Today, KB RollerTech processes metal belts with the following properties: Properties Nickel belts Stainless steel belts Length < 350 mm < 400 mm Diameter 15 - 50 mm 10 - 100 mm Wall thickness 30 - 500 µm 35 - 100 µm Geometry straight straight and concave Remarks 100 mm diameter only possible with seam Concerning the coatings the following combinations are possible: Nickel belts Stainless steel belts PFA sleeves PFA spray coatings or PFA sleeves Silicone and PFA sleeves Silione and PFA spray coatings or PFA sleeve

Hotmelt Lamination is the method of bonding two different materials such as Film, Spunbond, Spunlace, Metalize, Towel, etc. with hot glue. Fabrics, films, and glues used in Hotmelt Lamination can be in different features according to the intended use of the product. Hotmelt lamination is performed to increase the product’s technical performance, diversify its functions, add an aesthetic look, and provide other additional features such as liquid and airtightness, toughness, endurance, etc. Areas of Use Medical: Hotmelt lamination technique is used in production of products such as tablecloths, surgery covers, gowns, for companies that manufacture medical sets. Promotion: It is used in products such as bags or dress covers. Home Textile: It is used in products such as tablecloths, wardrobes, white goods covers, etc. Insulation: It is used for maintaining the moisture balance inside as well as to provide heat, water, noise insulation

Fabrics, films, are used in lamination have different properties according to the intended use of the product. The method of melting plastic raw materials under pressure and temperature and then letting them flow onto the surface of the material to be coated is called Coating-Plastering. Unlike hotmelt lamination, glue is not used in the Coating- Plastering technique. Fabrics and films used in Coating-Plastering may have different properties according to the product’s intended use. Coating-Plastering is performed to increase the product’s technical performance, diversify its functions, add it an aesthetic look, and provide other additional features such as liquid and airtightness, toughness, endurance, etc. Areas of Use Medical: It is used in products such as tablecloths, surgery covers, and gowns.. Promotion: It is used in products such as bags and dress cover.

Product Features: • Ideally suited for vertical mounting of printed circuit boards; internal side walls included moulded in card guides. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP45. • Lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Smooth black finish with black screws.

Product Features: • Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards. • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure half is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Two sets of vertical 1.5mm (0.062") P.C. board guides are moulded into case halves front and rear. • Front and rear panels are 1.6mm (0.064") brushed aluminium with protective paper on one side. • Cases halves are secured with M3 x 0.5" x 10mm (0.39") Philips machine screws threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Integral horizontally P.C. card mounts on Eurocard centers.

Cradle 3T (turnable) Sheet steel cradle, open and turnable Suitable for 310ml 1K cartridges Color Black, turquoise Other colors on request Drive Extrusion rate: V= 4mm/pump Extrusion force ~1000N (at a manual force of 10kg) Application example: kitchen and bathroom tile joints, auto repairs, ... Other drives on request Benefits Rubber-cushioned handles Rigid, warp-free housing Wear-free, hardened, and specially chromium-plated drives Ergonomically designed, non-slip, rubber-coated plastic insert simultaneously designed to secure the cartridge. Three mechanical step-up ratios available Custom colors on request Packaging Individually packed in PE bags 12 units per box 470mm x 310mm x 250mm

High quality copper sheet metal, typically Grade C106, (CW024A) Peal-able plastic coating to one side Worldwide delivery