Control - Import export

Description: The LMR36520ADDAR is a SIMPLE SWITCHER® DC DC switching controller from Texas Instruments. It is designed to provide a regulated output voltage of 1V with a maximum current output of 2A. It has a wide input voltage range of 4.2V to 28V and is capable of synchronous rectification

The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected

The Focovision by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semivisible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it has a user friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required. Minimal training required Very high measurement speed Flexibility (configurable procedures, easy to adapt, any toleran

The ProMapper is the A&R table-top solution to provide state-of-the-art optical inspection according to the industry standards (ISO/ANSI), totally independent from the operator. In addition, it supplies freeform surface evaluation based on the A&R Error Map technology, making sure that no surface defect is shipped to the customer. Based on the Error Map, surface quality features like the GMC (Global Mapping Criteria) are evaluated and constitute extremely relevant inspection data for process control applications (Statistical Process Control).

The Dual LensMapper, integrated in this unit, gives a mapping of the prescription lens (freeform or conventional) and calculates FOA optical power at the reference points (FV, NV). For the freeforms, it compares the expected design to the real lens and displays an error map. A Go/NoGo decision is made, based on the error map and the list of criteria defined by the lab. Because the A&R AutoMapper is task specific, and the system has a small footprint, you can easily integrate it into the lab, either directly after the surfacing or in the final control (also suitable for checking the cut lenses). The AutoMapper is an excellent investment for a modern lab with a rapid payback! 100 % production control just after surfacing --> direct feedback on production* control of the cut lens - in case of remote edging Non contact measurement Correction of eventual R/L inversion Integrated Dual LensMapper : measurement of free form and conventional progressive lenses Control of power, cyl.

We are happy to support you by taking on tasks related to the control and coordination of e.g.: Cross-divisional project management Cross-plant project coordination supplier control Vorseriensteuerung Prototypes and test construction Series start-up control component coordination parts management

The intrinsic quality of the various components, sub-assemblies and software is checked at each stage of design and manufacturing. During the pre-validation phases, performance, durability, and efficiency goals are meticulously assessed and cross-checked with the obligations defined in the specifications. These efficiency targets are cross-referenced and verified with our customer upon commissioning of the equipment, following the implementation of a duly developed validation protocol.

As part of our maintenance and repair services, our teams can manage the technical upgrading and renewal of your existing pneumatic and hydraulic controls.

A major challenge when designing special machinery, the quality of design and integration of hydraulic and pneumatic controls is key for proper operation, reliability and maintenance purposes. Fully aware of these issues, we take the greatest possible care and apply our wealth of experience to design and integrate pneumatic and hydraulic control solutions that are both efficient and reliable. The components used are all selected from the most widely used, tried-and-tested solutions available from leading manufacturers. At your request, we will install the materials recommended by your technical services.

Our metal work unit is equipped with all the equipment required to carry out the majority of operations related to the production and shaping of metal objects: mortising machine, press, drilling machines, rolling machines, semi-automatic welding stations and TIG/Plasma/Oxycutting workstations. Our vast range of metal work equipment and the adaptability of the workshop’s covered areas are ideal for performing almost every type of shaping.

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs

- Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A

dryve motor control system - select, click, control... Travel distances, positions, speeds, operating times - easily defined with the new igus® web-based control system for drylin® E linear systems. - No software or app installation necessary, fast commissioning - Control possible via smartphone (browser), tablet or laptop - Simple and intuitive user interface, control system set up in just a few minutes - Compatible with numerous industrial controllers (e.g. Siemens S7/Beckhoff) - For DC, EC and stepper motors - Cost-effective

High-end tightening control system for complex and high-precision tightening operations The multifunctional applicable controller CONTROL Professional+ is qualified for manual work stations, automatic stations as well as multi-channel system solution. For Yokota system impulse wrenches following different variants are available; Angle, Torque and Pulse controlled Yokota system impulse wrench with additionally integrated status LED, automatic tool detection and parameterization for security related screw joints acc. VDI/VDE directive 2862, class A. Torque and pulse count controlled Yokota system impulse wrench (external automatic tool detection and parameterization). Torque and pulse count controlled Yokota system impulse wrench. With CONTROL Professional+ you are facing a high-end controller for the direct measuring of Torque, Angle and Pulse Count. The impulse tool is controlled, monitored and reproducible shut off by the different thightening methods, parameterized to your...

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

Outer body steel. Mounting bush plastic. Version: Steel electro zinc-plated. Note: Rotation dampers are maintenance-free, ready-to-install elements for the controlled braking and damping of rotational or linear movements. These rotation dampers enable the smooth opening and closing of small covers, compartments and drawers. They protect sensitive components and can also raise the quality and value of products. The rotation dampers brake right or left rotations or in both directions. One cycle rate corresponds to one 360° right rotation and one 360° left rotation. Attention: The rotation damper bush should not be used as a support, but rather as an external guide or bearing.

2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with integrated positioning control. Note: Stepper motor with integrated positioning control. It forms a convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip. Actuation via single I/O interface, 31 position configurations and call-ups. Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free download. When selecting a suitable motor, using just the retaining torque is not enough, as the motor’s torque decreases with the speed. It is therefore essential to select the correct motor according to the torque curve.

Micrometer Adjustable Torque Screwdriver The ExacTorq® torque screwdriver permits single-digit adjustment. Gone are the days of estimating torque. A simple twist of the end-mounted DigiLock mechanism sets your torque levels in exact, single digit increments. The positive locking detent secures your selection. Its‘ unique tri-lobular grip design for enhanced comfort and handling translates into improved operator technique and lower risk of repetitive motion injury. Enhanced comfort translates into enhanced accuracy. The operator cannot overtorque. A clutch releases automatically when desired torque has been achieved. The anti-backlash design enhances the repeatability. Additionally, the ExacTorq® is comfortable in even the smallest of hands, performing flawlessly when used by women and men on the assembly line. To operate, simply dial torque setting and insert bit.

Tohnichi's AMRD series torque screwdriver provides same features as series RTD, except designed for tightening small screws. Thereby this model is ideal for assembly of watches, precision electronic equipment, computer, etc. Via micrometer scale torque can easily and quickly be adjusted. Index finger holding feature allows the operator to tighten with precise movements. Upon reaching the set torque, it clicks to signal tightening is complete. Integrated rotary clutch mechanism reliably prevents over-torque. Key Features: - Accuracy and calibration compliant to ISO 6789 type II class D - Micrometer adjustable - Clockwise direction - Click signal - Rotary clutch - Calibration certificate (ISO/JIS) incl. Options: - Counterclockwise tightening model available on request. - Optionally available in metric (gf·cm) or in english units (lbf·in, ozf·in).

Preset Clicker Type Torque Wrench Sturtevant Richmont‘s smallest preset torque wrench delivers consistent assembly quality. Designed for assembly operations where access is limited and low torque capacities are required. A tactile impulse and audible click are emitted when the pre-set torque is reached, making it easy for the operator to perform the torque application process properly. The slender design permits use in limited-access applications where larger tools simply will not work. Light weight and smooth vinyl handle provides good ergonomics. More than two dozens of different interchangeable heads are available as standard. Further sizes and/or special tools are available on request. Key Features: - Accuracy ± 6% i.v. (within 20-100% of capacity) - Meets or exceeds ASME B107.300-2010, GGG-W-686E and DIN EN ISO 6789 - Audible click and tactile impulse - Oil-proof and chemicals resisting Vinyl handle - Bi-directional – right / left.

Dial Indicating Torque Screwdriver with mNm scale Tohnichi's MTD series torque screwdriver is suitable for inspection and tightening of very small screws, e.g. small torque motor shafts or the like. Torsion bar mechanism makes accurate measurement possible. With bi-directional scale plate, it can be used for both retightening and loosening torque testing methods. Memory pointer captures peak torque. Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class D. Key Features: - Bi-directional scale - Peak torque indication via Memory Pointer - Accuracy and calibration compliant to ISO 6789 type I class D - Bit insert #2 Tohnichi Shipping List: - Screwdriver MTD - Calibration Certificate (ISO/JIS) - Operating Manual - Special Bits Cross #0, Slotted 0.15x1, 0.2x1.5, 0.3x2 Options: - Alternatively with english units (ozf·in) available. Metric scale (gf·cm) on request.

Dial Indicating Torque Screwdriver Tohnichi's FTD-S series torque screwdriver is ideal for inspecting tightened screws. With bi-directional scale plate, it can be used for both retightening and loosening torque testing methods. Memory pointer captures peak torque. Model FTD8N-S and FTD16N-S comes with auxiliary tightening tool ("T-Grip") as standard accessory. Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class D. Key Features: - Bi-directional scale - Peak Torque indication via Memory Pointer - Coloured dial plate - Accuracy and calibration compliant to ISO 6789 type I class D - Tool insert 1/4 inch Shipping List: - Screwdriver FTD-S - Traceable Calibration Certificate (ISO/JIS) - Operating Manual Options: - Models with metric scale (gf·m, kgf·m) on request. Related Products Insert Bits with 1/4“ hex drive acc. DIN 3126 E6.3

Torque Screwdriver with reversible digital display Tohnichi's digital screwdriver STC2-G is ideal for controlled screw tightening or inspections. Manual screw tightening always represents a risk because fasteners are often overloaded and a fracture hazard. This risk is minimized by the torque screwdriver with LED indicator ring and reversible display. The STC2-G is powered by a Li-Ion battery pack that allows a continuous use of up to 30 hours. Available measuring units are cN·m, kgf·cm, Lbf·in, and ozf·in. Up to 1000 readings can be stored in the internal memory. The display of STC2 -G can be reversed, whereby the reading from the respective viewing angle is greatly facilitated. This increases the reliability of results and ease of use. Key Features Accuracy ± 1% Track or Peak mode in both directions 3-colour LED indicator ring shows torque status Memory for up to 1000 readings USB interface for data export 1/4“ hex insert for bits and adaptors acc. to DIN 3126 E6.3

Colour Code Shrink Sleeves Using several PM screwdrivers preset to different torque values? Color coding sleeves keep your preset torque wrenches identified. Use a different color for each torque, and tell the operator which to use for what application. How simple! Color coding is a fast and effective means of identifying the correct tool for a specific use. These shrink sleeves are suitable for use on the shaft on SR preset torque screwdrivers, and come in five colors.

Preset Torque Screwdriver Sturtevant Richmont PM-Series Preset Torque Screwdrivers are ideal for any application where 1. high repeatability for low torque is needed, 2. excellent durability and versatility is needed. These needs are common in high-precision assembly operations and for maintenance tool kits for electronic and electro-mechanical products. The operator cannot overtorque. A clutch releases automatically when desired torque has been achieved. The anti-backlash design enhances the repeatability. PM torque screwdrivers are incredibly durable. Many owners experience a service life of 15+ years. Key Features: - Bi-directional accuracy of ± 6% i.v. (20-100% of capacity) - Meets or exceeds ASME B107.300-2010 & EN ISO 6789 - Anti-backlash design - Short dwell designed to prevent repetitive motion injuries - 1/4 hex drive (C 6.3) Can be ordered preset from factory with certificate of calibration from SR's ISO/IEC 17025 Accredited Calibration Laboratory.

Micrometer Adjustable, Reliable, Complete - Perfect for the Field! Our kits both have the CAL 36/4 Micrometer Adjustable Torque Screwdriver at their heart, assuring efficient and reliable repair and maintenance operations! Features an Benefits Each includes a CAL 36/4 Micrometer Adjustable Torque Screwdriver. A free NIST-traceable tabulated Certification is included from SR's ISO/IEC 17025 Accredited Calibration Laboratory! Each includes a custom blow-molded plastic case for convenient organization and safe storage and transport. Each includes slotted bits, Phillips bits, and an adapter to permit use with sockets.