Seals - Import export

Flat gasket for gas from DN12 to DN50 In synthetic-Rubber Fibre in conformity with NF E29-533 standard In Nitrile (NBR) 85 +/- DIDC in conformity with EN549 A2 H3 standard

Bonded seals are a cost-effective solution for bolt/thread sealing. They offer reliable high and low pressure sealing capability and are able to perform in a wide range temperatures. The seal itself is made up of a disc consisting of a metallic ring and a rubber sealing pad bonded together.

The Turcon® Glyd Ring® T is a double-acting O-Ring energized rod seal for dynamic applications, offering low friction with no stick-slip, minimal break out force and high wear resistance. The trapezoidal cross-section of the Turcon® Glyd Ring® T provides very good static leak-tightness and the angles of each lip are designed to provide improved leakage control and better resistance to extrusion.

A single-acting sealing element consisting of a U-shaped Turcon® ring and a metallic V-shaped finger spring. The special flanged heel prevents the seal from rotating/twisting and the short and heavy dynamic lip offers reduced friction, resistance to aging and a good scraping effect even in highly viscous media.

The Turcon® Variseal® HF is a single-acting axial/face sealing element comprised of a U-shaped Turcon® ring and a coiled metallic energizing spring. This design ensures gas-tight sealing even at low temperatures. It is resistant to most liquids and chemicals and has unlimited shelf life.

The Turcon® Variseal® HF is a single-acting axial/face sealing element comprised of a U-shaped Turcon® ring and a coiled metallic energizing spring. This design ensures gas-tight sealing even at low temperatures. It is resistant to most liquids and chemicals and has unlimited shelf life.

Zurcon® Dualseal is an excellent alternative to an O-Ring and Back-up Ring combination. The advantages are its resistance to twisting, stability at pulsating pressures and low risk of contamination. Dualseal is easy to install and has a long service life.

The Zurcon® Scraper ASW has an additional supporting bead on the inner surface which prevents twisting of the scraper in the groove, also preventing impurities from reaching the back of the scraper. It efficiently removes dirt, dust and water while leaving the required residual oil film on the rod. Simple installation.

A double-acting scraper with a sealing and scraping lip in injection molded polyurethane, designed in such a way that it efficiently removes dirt, dust and water while leaving the required residual oil film on the rod. The inward-facing scraper lip seals even under low pressure. Wear resistant, long service life

Double-acting O-Ring energized scraper with two O-Rings that has two functions: a) to scrape contaminants from the retracting piston rod to prevent soiling of the system and b) to hold back the residual oil film on the extending piston rod on the medium side. Excluder F is recommended for use in conjunction with Turcon® Stepseal® 2K or Zurcon® Rimseal. Very high resistance to hydraulic media.

A double-acting O-Ring energized piston seal which includes a polyurethane seal ring - suitable for dynamic applications. The Zurcon® Wynseal is a tear and abrasion resistant seal with an especially high sealing effect, aided by the special design of the seal edge profile.

The Turcon® Variseal® M2S is a single acting seal with scraper lip, based on the design of the Variseal® M2, consisting of a U-shaped seal jacket and a corrosion resistant V-spring. The asymmetric seal profile works well even in media with high viscosity and the Turcon® material and V-spring makes it compatible with a wide variety of fluids and chemicals.

Turcon® Variseal® W2 is a single-acting rod seal consisting of a U-shaped jacket and a corrosion-resistant Slantcoil® spring. The advantage of the seal lies in its low friction and relatively constant preloading force over a large deformation range. Suitable for reciprocating and light duty rotary movement, it is often interchangeable with an O-Ring and Back-up Ring.

A single-acting sealing element comprised of a U-shaped Turcon® ring and V-shaped metallic energizing finger spring. Suitable for reciprocating and light duty rotary movement. Compatible with most fluids and chemicals and efficient in a wide range of temperatures, it offers low friction with no stick-slip, minimal break out force and high wear resistance.

The Zurcon® U-Cup has a very high sealing performance with lower friction and lower heat generation than standard U-Cups. The special shape of the trimmed lips allows for outstanding wear and extrusion resistance. Compatible with virtually all media, it also has a wide operating temperature range.

A single-acting rod seal energized by an elastomer O-Ring, the Zurcon® Rimseal provides high static and dynamic leak tightness. Acts as a suitable secondary element to ensure reliable sealing of thin oil films at low secondary pressures. Easy installation and high wear resistance.

Double Delta® combines the flexibility and response of O-Rings with the wear and friction characteristics of the Turcon® materials in. The double acting performance of the seal follows from the symmetrical cross section which allow the seal to respond to pressure in both directions. Initial contact pressure is provided by radial compression of the O-Ring. When the system pressure is increased the O-Ring transforms this into additional contact pressure, the contact pressure of the seal is thereby automatically adjusted so sealing is ensured under all service conditions.

POLYPAC® - Veepac is a set of fabric reinforced Chevron rings comprising of a support ring , sealing rings and a pressure energising ring . In the packing set the energising axial force is transferred between the individual packing rings so that each ring is pressed into positive contact with the rod surface. Additional to the standard material special material grades are available for a large variety of working conditions.

The POLYPAC® - Balsele is a compact rod seal consisting of an elastomeric sealing element and an integrated fabric reinforced base. Due to the radial pre-load an excellent sealing performance will be achieved even at low pressures. The fabric reinforced base prevents the seal from extrusion.

A single-acting rod seal, Zurcon® L-Cup® is an alternative to the U-Cup. It is a highly effective sealing system offering optimized sealing performance and extended service life. With exceptionally low friction properties, it has high wear resistance, back pumping ability along with high static and dynamic tightness.

In heavy duty applications, leak free performance and high service life cannot be assured by a single sealing element; therefore, specially developed ”system seals” are arranged in series, building a ”tandem configuration”. Each sealing element in a system has its specific function and their interaction needs to be secured to get a redundant sealing system. The primary seal in Zurcon® material has an excellent wear and extrusion resistance under extreme working conditions. It allows a fine lubrication film passing this first barrier, ensuring the necessary lubrication of the secondary sealing element for long service life. The ”tandem arrangement” requires an outstanding back-pumping ability of the primary seal and the secondary seal, if a double acting scraper is installed.

The double acting Turcon® Glyd Ring® is a combination of a Turcon® based slipper seal and an energising O-Ring. It is produced with an interference fit which together with the squeeze of the O-Ring ensures a good sealing effect even at low pressure. At higher system pressures, the O-Ring is energised by the fluid, pushing the Turcon® Glyd Ring® against the sealing face with increased force.

O-Rings are the most widely used seals because they are efficient and economical and can be used in a wide variety of static and dynamic applications. O-Rings can be used to seal practically all liquid and gaseous media and they are available in elastomeric and other materials including EPDM, FKM and NBR, among others.

This single-acting O-Ring energized rod seal is made of Turcon® and provides high static and dynamic sealing results. Can be installed together with other seals in a tandem configuration for advanced static and dynamic tightness. The Turcon® Stepseal® 2K offers high extrusion resistance, low friction with no stick-slip, minimal break out force and high wear resistance.

The Zurcon® U-Cup has a very high sealing performance with lower friction and lower heat generation than standard U-Cups. The special shape of the trimmed lips allows for outstanding wear and extrusion resistance. Compatible with virtually all media, it also has a wide operating temperature range.

A double-acting O-Ring energized seal, the Turcon® AQ Seal® is suitable for sealing between two media such as fluid and gas. It consists of a Turcon® ring and an X-ring or Quad-Ring® inset into the dynamic sealing face. It has excellent sliding properties with no stick-slip effect and can be installed into small spaces.

Turcon® Variseal® W2 is a single-acting seal consisting of a U-shaped jacket and a corrosion-resistant Slantcoil® spring. This spring provides an almost constant load regardless of hardware tolerances and seal wear. Suitable for reciprocating and light duty rotary movement, it is often interchangeable with an O-Ring and Back-up Ring.

The Turcon® Excluder® 2 is a double-acting O-Ring energized scraper that has two functions: a) to scrape contaminants from the retracting piston rod to prevent soiling of the system and b) to hold back the residual oil film on the extending piston rod on the medium side. The O-Ring maintains the pressure while the Excluder® 2 performs the scraper function. Excellent sliding properties and stick-slip free.