Drawn tubes - Import export

The Precision Tube is PAF's top-of-the-range technical product. It is manufactured to EN10305-2 standard and used in the best precision mechanical parts manufacturing plants in Tunisia and Europe. Drawing processes make it possible to obtain tubes specific to each application, by playing on steel grades, mechanical characteristics, reduced dimensional tolerances and final surface finish.

Depending on the application, tubes may require subsequent drawing following the extrusion process. Examples of this are: a requirement for a high degree of dimensional control and/or the need for tight tolerances, where the final outside diameter and/or wall thickness of the extruded tubes can only be achieved by subsequent cold drawing, where the final mechanical properties for non-heat treatable alloys are to be achieved by strain hardening (drawing) or where special requirements exist for the microstructure of the tubes.

The different kinds of cold drawn tubes ready on stock cover a wide range of applications: COLD DRAWN SEAMLESS AND WELDED TUBES SUITABLE FOR HONING. COLD DRAWN SEAMLESS AND WELDED TUBES INSIDE H8. COLD DRAWN SEAMLESS TUBES FOR SHAFTS. WELDED SMOOTH BORE CYLINDER TUBES INSIDE H9 OR H10. COLD DRAWN SEAMLESS TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS. Seamless and Welded Cold Drawn pipes honed or ready for honing; H8, H9 or H10. STEELGRADES AND DELIVERY CONDITIONS COLD DRAWN / HARD (+C acc. EN 10305 / BK acc. DIN 2391) No heat treatment after final cold drawing. COLD DRAWN / SOFT (+LC acc. EN 10305 / BKW acc. DIN 2391) The final heat treatment is followed by a suitable drawing pass (limited reduction of area). STRESS RELIEVED (+SR acc. EN 10305 / BK+S acc. DIN 2391) After the final cold drawing process, tubes are stress relieved in controlled atmosphere in order to reduce work hardening due to the cold forming process. ANNEALED (+A acc. EN 10305 / GBK acc. DIN 2391) After...

Guide tubes for solenoid valves, deep-drawn from stainless steel. Tightest tolerances, high quantities

Ming Xiao Manufacturing Co., Ltd.is professional ISO9001 certificated Metal Parts Parts manufacturer, Located in China Ningbo,Specialize in Services of Sheet Metal Stamping,CNC Turning & Machining,Tube Bending, Cold forging & Hot Forging, and also can provide outsourcing services of laser cutting & Casting. We produce metal parts for various indstries,custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample,such as kinds of machined parts – metal shafts,steel rods, bushings, Sleeves, Flanges, tubes; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold forging parts,studs,bolts,screws,nuts,pins; steel wire forms and all kinds metal components. We provide a wide range of machining services, can satisfy the customer many types of products one-time order, for the customer to save a lot of trouble and costs for buy in different suppliers.

Performance The patented STAUFF Form tube forming system is without doubt one of the most high-performing solutions currently available on the market for connecting metric sized tubes. Apart from its simplicity, it also provides a maximum level of safety, reliability and reproducibility. STAUFF Form has been designed as standard for seamless cold-drawn precision steel tubes as well as stainless steel tubes with dimensions between 6 x 1.5 mm and 42 x 4 mm in the Light Series and between 6 x 1.5 mm and 38 x 6 mm in the Heavy Series. Parameters for alternative materials (copper, brass, CuNiFe, Tungum etc.) can be added by the manufacturer, if required. System Design and Components The system is based on standard parts and consists of only four key components: The STAUFF Form Ring with an integrated and thus undetachable elastomeric sealing is slid onto the tube end, which has previously been mechanically contoured. This creates a positive-locking connection that provides a...

Unslotted corrugated tubes are used to protect cable wires and cable harnesses. When cutting this corrugated tube sheathing to length, it is important to cut precisely and reliably on the crest of the wave, to avoid forming sharp cutting edges which damage the in-drawn cable wires. Metzner corrugated tube cutting machines of the CT 4000 series process corrugated tubes with great reliability and precision. Thanks to our many years of experience in processing corrugated tubes, we know the challenges that some corrugated tubes present and are well prepared for them. Our wide range of standard equipment ensures the best possible processing of your corrugated tubes. l The Metzner CT 4200 additionally offers an integrated slitting device for automatic slitting of unslit corrugated tubes. For material diameters from 7.5 mm to 40 mm.

The main feature of these new capillaries are the four separate chambers in a circular cross-section. The chambers inside the capillary are separated by an extremely thin membrane, which retains its shape also while the tube is being drawn to a fine tip. This makes them ideally suited for liquid perfusion applications with cells, because deformation of the cell walls and the membrane is reduced to a minimum. Theta cross-section capillaries

Goodridge HL836 AN-04 and AN-06 Aluminium hard line is the ultimate light weight hard line solution; ideal for air jack, fuel, oil and water applications. The Hycot® tube is a corrosion resistant, light weight, precision drawn aluminium tube with a polyamide coating; providing strength and rigidity whilst allowing it to be formed to suit the installation. HL 836 fitting design does not require the tube to be flared, in addition a range of banjo, tee-piece, male and female fittings are available to complete the installation of complex systems, in tight environments.

Durability and corrosive resistance are key criteria when it comes to precision thin wall tubing for industrial condensers. The tube mill at Superior Tube more than meets that requirement, and we supply products to a range of leading engineering companies. In the energy sector, our high quality stainless steel and nickel alloy condenser tubes are used for the cooling, heating or re-heating of fluids or gases within steam turbines that generate electricity. Condenser tubing products can be purchased from Superior Tube as seamless, welded or welded drawn tubes in a multitude of sizes ranging from 0.010” OD to 1.500” OD with wall thickness as light as .003” Please note that we have a minimum order value of £10,000.

Heat exchangers – used to cool, heat or reheat fluids, gases and air – are an area that Superior Tube specializes in. We offer a range of products specifically meeting the demands of companies fabricating shell and tube heat exchangers. Our heat exchanger tubes are used in a wide range of industries such as chemical processing, hydrocarbon processing and oil refining, alternative energy, nuclear power generation and aerospace. The stainless steel and nickel alloys we manufacture are high strength, corrosive resistant alloys that maintain optimum performance in extreme conditions. Superior Tube heat exchanger products can be purchased as seamless, welded or welded and drawn tubes in a multitude of sizes ranging from 0.010” OD to 1.500” OD with wall thickness as light as .003” Please note that we have a minimum order value of £10,000.

The welding process is one of the core ways in which we manufacture precision tubes. Our high-quality tubing starts off as a flat strip of metal. The strip is formed into a tube through a series of rollers and the join, also called the seam, is then welded together. Welded Processes Special non-destructive testing methods – including eddy current, ultrasonic and pressure testing - are used to ensure a consistent weld. Just like with seamless manufacturing, welded tubes can be drawn down by plug drawing or sinking. This method can be used to create very long lengths of coiled tube, these can also be measured during coiling using a laser measurement. The main welded tube manufacturing processes used are strip welding and cold drawing, but other important processes in between, or at the end of the drawing process, include Please note that we have a minimum order value of £10,000.

Broder Metals Group stock and supply to the following specifications: AMS 5844 – solution treated and cold drawn bars AMS 5845 – solution heat treated, cold drawn and aged bars NACE MR 01-75 – sulphide stress cracking resistant material for oil field equipment AMS 7468 – bolts and screws, forged head, roll threaded after ageing. We hold stock from 12.7 mm (1/2”) to 76.2 mm (3”), mainly in the optimum SCC (NACE) condition, along with selected smaller sizes of AMS material. Material can also be supplied as cold drawn tubing on a leadtime. Broder Metals provide this alloy with our global same day quote, next day dispatch service. All our metals are fully traceable for your confidence, with clear certification delivered electronically or sent with the material as requested. For further information please contact us at ++44 (0)114 232 9241.

Deep-drawn tubes from stainless steels (with a closed side or open) Deep-drawn tubes from non-ferrous metals as bronze, brass,... Seamless sleeves made with stamping processes Ultra thin-walled tubing in Beryllium copper or other special alloys Annealing services in vacuum furnaces Washing technologies for soap and oil The precision tubing is needed at Mera Bellows to manufacture seamless metal bellows.

Stainless steel bellows, formed from seam-welded thin wall tubing Stainless steel bellows, formed from deep-drawn seamless tubing Bronze and Brass bellows for measuring and controlling applications Hydroformed bellows from exotic alloys as Beryllium copper or Monel400 Customized designs and end forms, also off-the-shelf standard solutions Special coatings on demand

CYLINDER TUBES (HPS & HPZ) •EN 10305-1 (HP) •EN 10305-2 (HPZ) •EN 10305-2 (HPS H9) Seamless, cold-drawn HP precision steel tubes EN 10305-1 Seamless, cold-drawn HPZ tubes have the best dimensional tolerances, plus excellent straightness and roundness. These tubes are thus excellently suited to peeling or honing. A recommended ultrasonic test can also be carried out for a surcharge Facts and Figures Diameter (OD)50,0 mm – 125,0 mm Wall thickness (WT)5,0 mm – 7,5 mm MaterialE355 Treatment condition+SR TestsEddy current testing EN 10893-2 extra charged: Ultrasonic testing EN 10893-10 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

material: sheet steel with silicon coating Proficoat 100 sets: 3 single moulds with adjacent profile frame. Also available for baking trolleys. Please ask! Beautiful "seamless" cakes. Our Gugelhopf- and Ring moulds with the "seamless" stamp are deep-drawn from a single sheet using tooling developed by us specially for this purpose. There is therefore no joint or seam, as in conventiona production. The result: Easier removal from the mould. The cake comes out perfect, without any seam. Moulds: mould with fitted tube mould deep-drawn out of one part mould as set 3-strap "Classic" with smooth border Original "Vienna"with ribbed border "Trendo" "Delizi" with grooved bottom with smooth bottom "Wikinger" oval Set 3-strap moulds seamless deep-drawn