Elastomer coatings - Import export

These low-cost miniature pressure transducers have been specially developed for very rapid hydrodynamic and aerodynamic in situ pressure measurements. The 2Mi sensors are available in a variety of housing designs and can simply be stuck on at the desired location. Despite its miniature design, the sensor chip is protected against external influences by a steel housing and a silicone elastomer coating. It can also be used in liquids.

Cost effective slab support with dimpled base for an ideal drainage of surface water. More than 60 versions available for different joint sizes and bond types. Choose VOLFI Basic Supports made from rubber-coated high performance elastomer for additional benefits.

Lubrication of rolling and friction bearings, as well as other machine elements at medium rotating speeds or sliding speeds in a broad temperature range For example, electric motors, drives, control systems and telecommunication and navigation systems under arctic conditions, Bowden cables and brake mechanisms in aircraft, sliding parts in shock-freezing systems etc. Lubricating grease for plastic/plastic and plastic/metal pairs and elastomers For plastic sliding coatings in bridge supports and as a parting agent in plastics processing Advantages and benefits Highly effective due to optimum formula Broad temperature range with a wide range of possible uses Excellently suited for lubricating plastics and elastomers Lubricating grease resistant to ageing, especially at low temperatures

We manufacture pressure and feed rollers for moulders, feeders and belt sanders according to drawings or samples, completely ready for installation. The choice of roll coating, the design in smooth or grooved form and the most suitable degree of hardness must be determined by the customer. Weinig rollers consist of a core made of aluminum or gray cast iron. In addition to the polyurethane materials that have long been tried and tested in the wood processing industry, the elastomer Vulkollan® is mainly used for the coating. The core mounting holes are designed as a keyway or with three side holes.The Weinig rollers are mainly coated with the elastomer Vulkollan® patented by Bayer. We would be happy to advise you by telephone or at your location regarding high-quality and cost-effective design of pressure and feed rollers.

Siegling Extremultus tangential belts have been optimized to suit the diverse range of yarn-manufacturing processes and different drive shapes. They play a major role in ensuring consistently high yarn quality and efficient production due to the following characteristics: superior abrasion-resistant coatings made of elastomer G or polyurethane with constant friction coefficients and long service lives; optimized surface pattern for the spindle and motor side; less belt creep and excellent levels of power transmission; energy-efficient polyester or aramide tension members; polyamide sheet tension members with good damping characteristics for high levels of effective pull; low-noise and low-vibration operation; antistatic finishes. Siegling Extremultus tangential belts are supplied as roll material, prepared for splicing or have already been spliced. With our splicing methods, homogeneous, reliable splices can be made efficiently while belts are still on the machinery.

This automatic washing & drying system provides high efficient cleaning of elastomers in through-feed method (on option washing with de-ionized, de-mineralized or ultra-pure water possible). Starting from the loading station, the washing drums are conveyed automatically to each washing station (→ station pre-washing → station rinsing → station high pressure cleaning → station high pressure drying) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.

100% ozone friendly solvent - meaning zero ODP. Excellent removal of greases, oils and flux residues and acrylic protective coatings from printed circuit boards (PCBs) Leaves a perfectly clean, dry surface – traditional solvents often leave it greasy. It is harmless to most plastics, rubbers, elastomers and surface coatings. NDD is compatible with a wide range of plastics.

Product Identification Chemical name: 2-Acetoxystyrene Synonyms: 2-Vinylphenyl acetate, Acetic acid 2-vinylphenyl ester CAS No.: 63600-35-1 Molecular formula: C10H10O2 Molecular weight: 162.19 Boiling point: 246 ℃ @ 760 mmHg Density: 1.070 g/mL Refractive index: 1.547 Specification Appearance: Colorless transparent liquid Purity: 98.00%min by GC Clarity (10% methanol solution): Clear Moisture: 0.10%max by KF Residual solvents: 0.10%max Polymerization inhibitor: 200-300 ppm Package Regular Packing: N.W 20kg/plastic drum Sample Packing: 0.1kg-1kg plastic bottle Transportation Information Classification: Non-dangerous goods HS Code: 2915390090 Status Commercial available Application 2-Acetoxystyrene [63600-35-1] has application in monomers for the production of resins, elastomers, adhesives, coatings, automotive finishes and inks, as well as in electronic materials. It may also be used as additives in elastomer and resin formulations.

In the domain of adhesive film and paper production, several techniques can be applied for primer and finish coating. Hannecard supplies rubber, as well as polyurethane roller coverings suited for both water and solvent-based coatings. Depending on the process, the pick-up, transfer or back-up roll can be elastomer coated. All qualities mentioned below are also available in antistatic versions.

Rotogravure (also known as gravure) is a form of printing that utilizes an engraved cylinder and an elastomer coated impression roller. The engraved image on the cylinder picks up the ink which is transferred to the web using pressure. Roller and sleeve covering play a crucial role in the rotogravure printing process as they ensure an even and maximum coverage of the ink in order to achieve the highest printing quality. Hannecard has been active and specialized in roller and sleeve coverings for gravure printing for more than 50 years now to ensure a perfect printing quality.

Electrostatic assist is used in rotogravure printing to prevent missing dots and ensure higher-quality images with high ink and color density. To guarantee the best and homogenous printing results ever seen, Hannecard developed the unique solutions HanneResist & HanneVision where carbon nano particles are added to its elastomer coatings. Thanks to this unique combination a more homogeneous electric field is generated, offering more accurate attraction of ink on the printed medium and resulting in a superior printing quality. This new technology also better controls the electric charge submitted to the roller, thus lowering the risks for over-charging and sparks. Our HanneResist & HanneVision covering solutions are suited for the decor & cardboard packaging (especially cigarette packaging) printing industry and complies with all electrostatic assist systems (top loading, direct charge (core charging) and side loading)

Multiple sizes in stock, Custom designs also available. LMK Thermosafe are pleased to present their hazardous area range of heating jackets. These ATEX and IECEx Zone 1, 2, 21 and 22 rated jackets use a completely new and proprietary design. They are constructed with custom elastomer and silicone coated glass cloth materials and high density fibreglass insulation. Safe operating conditions are maintained even in the presence of potentially explosive gases and dusts. No transformers are required as they operate using standard ac supply voltages. InteliHeat Flexiplus jackets are ideal for gentle warming and to avoid winter freezing. For faster heating rates and melting solids at higher temperatures, the Thermosafe Induction Heater is normally recommended, but we can also offer more powerful custom jacketed solutions with digital jacket and wall-mounted controllers. The InteliHeat Flexiplus range is designed for use with plastic, stainless steel or magnetic steel drums.

The requirements: long life (e.g. > 1 Mio A4) extremely thin elastomer coatings (e.g. < 1 mm) processing of high duty elastomers (e.g. fluoro-elastomers) high abrasion resistance non-stick top coatings (e.g. Teflon®)

The new developed chemical suit with SOLAS/GL approval has an integrated anti-fog coating with additional Teflon- film disc. The gloves of the type WIPAN-C with fabric interlinings and external coating of VITON, are worked into exchange technology, therefore inner- and out gloves are not necessary. All common breathing apparatus can be used under the suit. A 130cm long gas- and liquid tight zipper is placed on the right side, which is protected by labyrinth cover and so installed that it can be closed from bottom to top. The suit disposes of radio equipment bag and is suitable for height from approx. 170cm to 200 cm. Features: Material: Sykan 2 provides a polyester support made of Polyamid that is coated with Elastomer (colour: orange). EN-class: category III- EN 943; part 1 and 2 – type 1a ET-PSA- guideline 89/686/EWG Weight: 6 kg