Emissions reduction - Import export

What you can expect from APROVIS oxidation and three-way catalytic converters: - Individual design for each specific application - Also special production for special applications - Short delivery times - Compliance with the limits over the warranty period - Use of soldered metal supports to withstand high thermal and mechanical loads - No telescoping of the catalytic converter elements

What you can expect from APROVIS SCR catalytic converters: - SCR housing with insulation - Optimised design of the catalytic converter honeycombs - Injection section with static mixers - Daily service tank - Dosing station for exact dosing of the reducing agent - Continuous measurement of nitrogen oxides (NOx) - Controlled urea injection at measured NOx values - High conversion rate and long service life

Effective NOx reduction systems offered by INSTAL-FILTER SA are combination of proven technologies based on long-term experiences and innovative technology. They are characterized by low cost consumption and great availability. To meet the binding law, INSTAL-FILTER SA offers the following NOx technologies: --> SNCR Selective, non-catalytic reduction method applied in high fumes temperatures of gases 850 – 1080 °C --> SCR Selective, catalytic reduction method applied in low temperatures of gases 180 – 470 °C --> COMBINED METHOD Combination of SNCR and SCR methods As an agent, which reduces the NOx, there are applied: --> Urea - (NH2) 2CO --> Ammonia - NH3 --> Ammonia water - NH4OH Taking economic aspect into accounts it is important to reduce the NOx level also on the grounds of primary methods.

Synthetic Low Saps Diesel and Gasoline Engine Oil, designed to help prolong the life and maintain the efficiency of Car Emission Reduction Systems (Diesel Engines: Diesel Particule Filter DPFs, Gasoline Engines: Three WAY Catalysts - TWCs) Recommended for new generation low saps gasoline/dieselautomobiles and light-dutydiesel powered engines,

Synthetic Low Saps Diesel and Gasoline Engine Oil, designed to help prolong the life and maintain the efficiency of Car Emission Reduction Systems (Diesel Engines: Diesel Particule Filter DPFs, Gasoline Engines: Three WAY Catalysts-TWCs)Recommended for new generation low saps gasoline/diesel automobiles and light -duty diesel powered engines,

Synthetic Low Saps Diesel and Gasoline Engine Oil, designed to help prolong the life and maintain the efficiency of Car Emission Reduction Systems (Diesel Engines: Diesel Particule Filter DPFs, Gasoline Engines: Three WAY Catalysts - TWCs) Recommended for new generation low saps gasoline/dieselautomobiles and light-dutydiesel powered engines, specially for TWCs).

Our industrial 3 kW electric heater hire will keep your operations running and your projects on track. This heater is one of the most convenient machines on the market in terms of dimensions, weight and performance. Easy to carry and transport with an optional wall mounting bracket. Integrated air distributor provides multi-directional air flow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Suitable for both indoor and outdoor commercial use. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets.

What you can expect with an APROVIS ActiCo: - Careful gas purification - Reduction of emissions - Damage prevention - Higher operational reliability - An improved combustion process - An extended activated carbon service life

Our industrial 36 kW electric heater is capable of heating very large spaces. It provides a very quiet and convenient solution and can be placed indoors or outdoors. The heater can be easily connected to an existing ventilation system. Portable and quiet unit. The unit has three power settings and two fan speeds. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Can be easily connected to an existing ventilation system. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Capable of heating very large spaces, indoors or outdoors. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets.

Our industrial 18 kW electric heater is quick and easy to install and operate. The unit has two fan speeds which allows for optimum performance under most site applications. Quick and easy to install and operate. Machine can be set at 4.5-9-18 kW. Fans can be regulated to operate at both half and full speed. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Optimum performance under most site applications. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets. Promotes a cleaner and safer working environment. Helps towards achieving BREEAM points.

Our industrial 9 kW electric heater has a powerful motor producing an efficient air flow. It features a compact chassis for easy placement within confined areas and allows the user to easily change air distribution, heat and air flow. Powerful, compact unit producing an efficient air flow. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Ideal for placement within confined areas. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets. Promotes a cleaner and safer working environment. Helps towards achieving BREEAM points.

Our 500 kVA canopy diesel generator hire service offers cost-effective, reliable power. Whether you have a planned or emergency power project, our 500 kVA generators will get the job done. Data is based on 50 Hz. For more information please request a data sheet. Generator shown may not be representative of equipment available at the time. EU emissions compliant to the Stage IIIA standard for Non-Road Mobile Machinery (NRMM). Super-silent sound attenuation levels without compromising performance. Fork lift pockets for easy loading and unloading with hiab vehicles. Tough but light-weight steel canopy enclosure. Simple controls and connections. Each generator package can include fully-bunded fuel tanks. Unique particulate filtration units can be fitted to most generators to dramatically reduce particulate matter. 24/7 Aggreko Remote Monitoring. Ideal for sites where emission reduction is a priority or environmental controls are in place.

Our 350 kVA canopy diesel generator is quick and easy to install, so we'll get you up and running in no time. Whether you have a planned or emergency power project, our 350 kVA generator hire service will give you cost-effective, reliable power - every time. Data is based on 50 Hz. For more information please request a data sheet. Generator shown may not be representative of equipment available at the time. EU emissions compliant to the Stage IIIA standard for Non-Road Mobile Machinery (NRMM). Super-silent sound attenuation levels - no compromise on performance. Durable, light-weight steel canopy enclosure. Simple controls and connections. Fork lift pockets for easy loading and unloading with hiab vehicles. Fully-bunded fuel tanks are available. Unique particulate filtration units can be fitted to most generators to dramatically reduce particulate matter. 24/7 Aggreko Remote Monitoring. Suitable for sites where environmental controls are in place or emission reduction

Our 320 kVA canopy diesel generator hire service can assist with your planned or emergency power generation requirements. From construction sites to festivals, railways to power plants - a 320 kVA generator offers flexible, portable power. Data is based on 50 Hz. For more information please request a data sheet. Generator shown may not be representative of equipment available at the time. EU emissions compliant to the Stage IIIA standard for Non-Road Mobile Machinery (NRMM). Super-silent sound attenuation levels without compromising performance. Tough but light-weight steel canopy enclosure. Simple controls and connections. Fork lift pockets for easy loading and unloading with hiab vehicles. Each generator package can include fully-bunded fuel tanks. Unique particulate filtration units can be fitted to most generators to dramatically reduce particulate matter. 24/7 Aggreko Remote Monitoring. Suitable for sites where emission reduction is a priority or environmental controls

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime.

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime. Minimized wear - protects

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime.

With the effective recovery of flue gas heat, you can save up to 14% on fuel and, at the same time, reduce emissions. — Effective heat recovery and reduction of flue gas losses — Maximum efficiency gain when using condensing technology — Fuel savings of up to 7%, or up to 14% when using an additional downstream condensing heat exchanger — Intelligent control for a long service life and high level of efficiency — Compactly integrated into the boiler or as a stand-alone version for simple retrofitting — Feed water cooling or combustion air preheating as alternatives to the condensing heat exchanger

The industry is looking for alternative energy production meeting new requirements: CO2 emission reduction, sustainability, self-sufficiency, co-product valorization. Amongst all the biomass valorizations, combustion keeps the first position in the green energy production market. The term ''biomass'' covers a wide variety of materials with very different characteristics. Depending on its use (production of heat, steam, pellets, gas...) it should undergo various transformations and handling in which DSEC is specialized.

THE EFFECT Fluctuating quality of fuel can impair performance and consumption. Coking on injection nozzles raises fuel consumption. The high pressures of modern injection pumps require outstanding fuel lubricating properties. ERC Diesel Power Additive improves ignition behavior (rise in cetane count), cleans and keeps injection nozzles clean, and the lubricity improver improves the lubricating properties of diesel, thus providing optimal protection from wear. ERC Diesel Power Additive contains a Performance Packet for stabilizing ageing or oxidation and cold-protection (in winter operation). THE ADVANTAGES AT A GLANCE: - eases cold start, boosts engine output - improves lubricating properties of diesel fuel and works against wear - cleans and keeps the fuel system and injection nozzles clean - protects against corrosion in fuel tanks, fuel supply lines and engine interior - results in lowers fuel consumption clean burning and reduction in emissions such as rust, CO etc.

Maintenance and repair work on the natural gas network is generally carried out with the pipeline being gas-free, so the relevant pipe sections are isolated by installing valve assemblies and the gas in the isolated section is vented to atmosphere. By using our mobile compressors – individually or in highly efficient parallel operation – the network operator can transfer the gas from the isolated pipe section to another part of the system so it does not have to be vented to atmosphere. Connection points for the mobile compressors are available e.g. in the area of the main line valves or can generally be retrofitted. It makes economic sense to transfer the gas to another as this guarantees responsible handling of this primary energy source and makes a substantial contribution to protecting the environment. Services offered: Pipeline recompression until lowest residual pressure < 3bar Reduction of methane emissions by up to 95% Responsible handling with primary energy

Desk partition in solid colors: Design your own modern, high-quality and functional partition to match your corporate design. For better room acoustics! Sound absorber class A and fire protection class B1! - Sound absorber class A according to DIN EN ISO 11654 - high-performance absorber - Fire protection class B1 according to DIN 4102 - Desk partition 40 cm high: Brilliant textile print can be replaced quickly and easily - Select format or request your format - 44 mm construction depth of the sound absorbers - Digital textile printing environmentally friendly with water-based inks - Acoustic material Öko-TEX® 100 certified,100% recyclable - Acoustic fleece: high-performance absorber or sound absorber - Colours: light grey (Pantone 420 EC), dark grey (Pantone 424 EC), steel construction (Pantone 644 EC), light green (Pantone 366 EC), beige (Pantone 7500 EC), light "mud" (Pantone 7535 EC), orange (Pantone 165 EC)

The metal garbage container for separate waste collection with flat plastic lid is made of 1.5 mm. sheet metal (steel sheet with additional galvanizing). Hot-dip galvanized according to EN ISO 1461: 2009. The ribbed body on several levels gives strength to the metal container. Highly resistant to extreme weather conditions - low and high temperature! Lid - made of high density polyethylene HDPE - double injection molded! Cover all European norms and standards for metal container for separate waste collection with flat plastic lid: EN ISO 840 - 2, EN ISO 840 - 5, EN ISO 840 - 6! They are serviced by all specialized vehicles with standard EN 1501-01 or equivalent, unloading with side pipes. The presence of a sealing mechanism at the bottom allows the removal of the collected liquids in it. The construction ensures tight closure and reduction of emissions from unpleasant odors in urban environments. It is possible to install a pedal for foot opening of the lid!

The metal waste container with round lid is made of 1.5 mm. sheet metal (steel sheet with additional galvanizing). Hot-dip galvanized according to EN ISO 1461: 2009. The ribbed body on several levels gives strength to the metal container. Highly resistant to extreme weather conditions - low and high temperature! Cover all European norms and standards for metal garbage container with round lid: EN ISO 840 - 3, EN ISO 840 - 5, EN ISO 840 - 6! They are serviced by all specialized vehicles with standard EN 1501-01 or equivalent, unloading with side pipes. The presence of a sealing mechanism at the bottom allows the removal of the collected liquids in it. The construction ensures tight closure and reduction of emissions from unpleasant odors in urban environments. For easier handling, each container has two handles on each side. It is actuated by four wheels, two of them with a brake mechanism. It is possible to install a pedal for foot opening of the lid!

With the FPM (once F&amp;G) explosion-proof low voltage motors, we offer you a complete programme of safe, reliable, durable and economically viable motors in protection IP 54 to IP 65, and Ex d and Ex de. All motors are also available as special versions to suit your individual requirements. The quality control system which is certified to DIN/ISO 9000, guarantees a consistent high level of quality. But there''s even more: As an environmentally friendly company, ATB Motorentechnik GmbH is also certified according to the EU-Enviornmental Audit (EEC 1836/93). We supply from our existing stock Kalefeld F&amp;G- flameproof motors / hazardous motors Ex de IIC T4 High Efficiency IE2 in frame size 80 - 200 ( 2 and 4 -poles ) 0, 75 - 37 kW. All motors on stock are with Ptc thermistors. Other frame sizes and versions are available within 6-8 weeks after receipt of order . FPM Explosion Proof Motors / hazardous motors available in IE1 and IE2 High Efficiency Energy-efficient motors with special components. Performance range 1,1 - 90 kW Ex-proof II 2 G Ex de IIC T4 reduced operating costs less heat losses extended winding lifespan extended lubricating grease service life lower noise levels than other motors reduced energy costs. The higher purchase price investment pays off positive environmental effects: Reduction in emission of C02 and NOx greenhouse gasses from power stations

Low pressure screw air compressor series is a new compressor produced according to the national policy of energy saving,emission reduction and environment protection.It changes the traditional compressor with relatively high pressure.It transfers the compressed air after pressure reduction to the air consumer,which waste large amounts of energy. The low pressure screw air compressor can be distributed according to the air pressure of the user,to satisfy the process flow with minimum energy.The manufacturing cost of your product can be largely improved.For example,if your process system only needs 3 bar pressure and the used compressor can provide 7 bar, then it can be reduced to 3 bar, It may take two times power to satisfy you process system, you can choose our low pressure screw compressor only to consume half of the power,and the air pressure in the process system can still be ensured, thus realizing energy saving and emission reduction.

our company designs and manufactures a full line of compressor packing cases, intermediate partition packing cases and wiper cases for your reciprocating compressor’s piston rod sealing system. Precision machined from cast iron, bronze alloy steel or stainless steel All packing and wiper cases are designed to be easily reconditioned when needed to maximize service life Available in cooled or non-cooled for use in both oil-free and lubricated applications to satisfy the full spectrum of temperatures, pressures and corrosive conditions Designed to meet all environmental concerns and regulations including available vent and purge designed assemblies for fugitive emissions reductions The packing case assembly is critical to the proper operation of the piston rod packing and the sealing of the cylinder. The packing case has several important features that help to maximize your compressor’s performance

The future is lightweight – with Flexweld®. Flexweld®, the unique joining process, offers countless benefits, with one of the biggest advantages being the considerable weight ­reduction in the age of lightweight construction. Moreover, no additional machinery is required to incorporate it into an existing car body assembly line. significant weight saving, which provides long-term reduction in CO2 emissions joins lightweight materials to high-strength metals can be incorporated into existing assembly lines since it is possible to use the same production and welding equipment no additional qualification for workers needed complete system including full feeder and processing technology mixed production possible by adapting the spot weld gun software