Fire protection equipment - Import export

The purpose of fire compartmentation is to to prevent the spread of fire to or from another part of the same building or an adjoining building. The compartment wall seperate the fire risk areas in a building (low, medium and high risk). The higher the fire risk in the area, the more fire resistant the compartment (30 minutes, 60 minutes, 90 minutes or 120 minutes). It also depends on the type of building and its height. Fire compartments are achieved by means of: Fire doors, curtains, shutters Fireproof partitions Fireproof ceilings Fire-stop closures Consult our professionals Do not hesitate to contact us, we can draw up an estimate together to find the best solution for your security.

We offer fire- and smoke-rated doors of all types: metal and wood. According to ITM regulations: EI 2 30 s, EI2 60 s, EI2 90 s, EI1 30 s, EI1 60 s, EI1 90 s. Doors combining several criteria: acoustic, thermal, burglar-proof, armoured. Doors guaranteed for up to 10 years with an opening and closing cycle of up to 1,000,000 cycles. Fireproof sliding doors. Consult our professionals You can discuss with us and we can draw up an estimate together to find the best solution for your security.

The Fibreflam ISO6 curtain is a flexible partitioning curtain without irrigation. With a fire resistance degree of EI60, it also conforms to the DAS NF S61-937-1 and -4 standard. Thanks to its control panel and its motor operating in 400V, the closure of the curtain is obtained by gravity in case of fire alarm. Only its reopening is motorised. The standard dimensions of this fire curtain are up to 4.36 m wide and 4.21 m high. In spaces with strong architectural constraints, this curtain can easily be hidden behind cladding. We can help you with this project, so don't hesitate to submit your requirements via this contact form or by clicking on our website

Heat protection and fire protection for pipes and hoses. Also available as mats or rolls for surfaces

Intufit® strips prevent cold-hot smoke from spreading when they reach a specified temperature during the fire. As Intufit® strips expand 20 times larger than their initial shape during a fire, they provide fire retardant properties. As a result of the self-adhesive applied on steel fire-resistant doors.

Material: custom size: according to drawings Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Sheets made of photoluminescent light-accumulating film FES-24P. Suitable for making evacuation plans, fire safety signs, photoluminescent screens for fire extinguishers.

Body: ASTM B-536 Nylon- 11 Coated / Gear Box: ASTM A-536 / Disc: ASTM B-356 EPDM Encapsulated / O-Ring: EPDM / Handwheel: ASTM A-536 / ** Connection Type: Flanged or Grooved or Threaded / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** It is identified as a local control valve. It is used as a shut-off valve on water feed lines to disconnect (control) in-situ zones. A butterfly valve or rising stem valve is used to shut off or control. the position of all valvesused in fire systems should be visible and electrically traceable. Butterfly valves are of a gearbox handwheel type. The supervisory switch of a butterfly valve are located inside the valve and there is an on/off indicator on it. **** Application Areas:Residences / Hotels / Hospitals / Business Centers / Shopping Centers

Body: Ductile Iron / Stem,Springs: Stainless Steel / Disc: Brass or Aluminium or Bronze / Disc gasket or Disc washer : EPDM / ** Connection Type: Flanged or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** The wet alarm valve is designed for applications where the water is unlikely to freeze. The water staying pressurized in the pipes is released over the fire area after the sprinkler is activated due to fire. The pressurized water system is not only feed contionuously, but also fills in the retard chamber. After the chamber is filled, the pressure switch on the chamber is actuated. The pressure switch sends the alarm information to the fire warning system or the automation system. After the pressure switch is actuated, the water is delivered to the water-motor gong and releases a mechanical alarm.

Test and Drainage Valves / Body: Brass ( Forged ) / Ball : Brass / Gasket : PTFE ** Connection Type: Threaded or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** In sprinkler systems, these valves are used for the testing systems and drain the unnecessary fluids from the systems. Advantages: They have sight glasses in their body,single valve is sufficient to drain the line. For choosing the test and drain valves, users should pay attention to line diameter. Also these valves have to have same diameter with the sprinkler orifice diameter. **** Application areas: The system where has sprinkler systems.

Connection Type: U bolt or Threaded / Working Pressure: 400 - 450 PSI / Working Temp.: 0ºC , +49ºC. ** In wet pipe systems, generally pedal type water alarm switches are used for informing users 4-10 gpm water flow has started. Water flow switches are used in Aqueous and foam fire extinguishing systems. They are used in only wet pipe systems. Because of the dry contact feature it appears on the control panel. Flow switches are suitable for the using in indoor and outdoor. *** Application area: All wet pipe lines

Specifications: - capacity up to 3000-8000 m3/hour - water consumption 0.3-0.5 1/s - pressure up to 100 atm. Execution: chassis, container, marine Application: - the fighting - localization of emissions - protection against thermal radiation - cleaning surfaces from contamination - fighting forest fires - deposition of smoke and toxic chemicals - elimination of icing - vapor-drip curtain - provision of temporary or emergency heat supply of residential buildings - sanitization (including Covid-19)

FINFIRE is new generation fire extinguishers. FINFIRE "SPHERE" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "SPHERE” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

FINFIRE is new generation fire extinguishers. FINFIRE "TAB" - autonomous powder fire extinguishing device to extinguish without human intervention fires of solid, liquid and gaseous substances, as well as electrical equipment under voltage: A, B, C, E classes. FINFIRE "TAB” is used in warehouse, technological, household premises, garages, apartments, shops, vehicles, and other places. Used as portable fire extinguishers or in addition to them. Extremely simplified design does not require special skills and great physical effort which helps to significantly save time in critical situations. The devices consist of a polystyrene body filled with fire extinguishing powder. Fire-conducting cords run along the edges of the body. The cords will activate the device upon contact with fire. Within 10 seconds after triggering, a pop is heard (additional warning signal). At the same time, the housing ruptures and the extinguishing powder is ejected.

PiroStrel - a system of remote extinguishing. PiroStrel is an automatic thrower with extinguishing fillers. Each filler contains extinguishing substance inside of the polymeric cover. “Dry water” is used as a filler. This substance is completely safe for human and environment as well as it doesn’t damage your property. Due to its non- conducting features it can be used for extinguishing objects under voltage up to 35kW. The thrower shoots fillers on the distance up to 100 m. It's particularly important since in most cases it’s difficult to get closer to the seat of fire using a standard fire extinguisher. PiroStrel’s rate of fire is 300 shoots per minute. In one minute, the thrower can provide the seat of fire with the amount of fire-extinguishing substance capable to cope with up to 100 m3 of fire surface.

Aerosol generator “MAG” is intended to extinguish fire of A,B,C and E classes in enclosed spaces. The extinguishing agent is safe for human and doesn’t require people evacuation. The fire extinguishing occurs due to a chemical reaction therefore interfering in combustion process with no oxygen isolation. The actuation of the generator occurs by means of linear heat detection under given temperature (short circuit of electric buttery takes place) or by means of Fipron-Cord when placed in the seat of fire.

Autonomous fire extinguishing system Hyperbola is designed to extinguish without human intervention class A, B fires and electrical equipment under voltage in objects of protection of small volume from 0.03 to 2.2 m3, located in rooms with operating temperatures from minus 40 ° С to plus 60 ° С and relative air humidity up to 98 percent at a temperature of + 25 ° С. The product is a sealed tube made of a special polymer material filled with a liquid extinguishing agent (GFFS) - a liquefied mixture based on organofluorine substances, sealed at both ends. The unit has overpressure inside the housing. The polymer material provides reliable storage of the extinguishing agent and its release under strictly defined conditions.

Variable inline foam inductor with foam induction 1-6%. Three flow rates are available - 225LPM, 450LPM or 900LPM. Inlet and outlet can be 2.1/2" instantaneous or threaded. Complete with pick up tube.

Geared or lever operated monitor with flow rates up to 4500 litres per minute. With jet/spray nozzle suitable for use with water or AFFF foam.

Aluminised close proximity fire suits available as one piece coverall or two piece jacket and trousers. Complete with aluminised hood, aluminised gloves and overboots.

Gunmetal fire hydrant valves are available as a globe valve or a gate valve. Globe valves are made in 4 different patterns, horizontal, right angle, oblique or bib nose.They can be supplied with a flange or threaded inlet and with 2.1/2" instantaneous, threaded or Storz outlet.

Designed for rapid one man deployment with 130 litre foam tank. Unit is complete, with foam inductor, hoses and foam branchpipe.

Fire hose reels can be supplied in three styles: Fixed - Surface Swinging - Recessed Swinging Manual versions have a separate gate valve to turn on the water when the reel is used. Automatic versions have a valve in the center of the reel which automatically turns on the water when the hose is pulled from the reel. Reels are for use with 19mm or 25mm reinforced rubber hose

Patol can design and manufacture control modules and fire & safety control equipment panels and cubicles to meet the requirements of national standards, client specifications or project needs.

ESS Energy Storage Systems are Lithium batteries backup power source The outdoor integrated energy storage system designed for commercial and industrial purposes incorporates the "hands-free, no installation" approach. It merges various components, including lithium iron phosphate batteries, a battery management system (BMS), an energy storage converter PCS, a photovoltaic inverter, air conditioning, fire protection, and other equipment, within a single energy storage outdoor cabinet. The system features an integrated design that includes photovoltaic and intelligent energy storage control. This ensures a safe and stable power supply while maximizing. the utilization of renewable energy sources.

Our standard Downdraft Spray Booth draws non-pressurized fresh filtered air, from a ceiling-mounted supply plenum, which then flows uniformly over the entire work area and out through a filtered, grated in-floor or grids basement exhaust plenum – creating an optimal spray coverage environment. Spray Booth Specifications: The main room & generator system: Wall panel: sandwich style, δ=50mm，rock wool available as required. Basement: steel structure, full grids，ramp: 2 pcs of grids. Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock. One 11kw intake fan and one 11kw exhaust fan. DUCTS: Electrical VCD. one pressure meter. Spraying/baking transition damper, automatically air controlled. Fire protection equipment: 1set, the inductor control closed; energysaving equipment: 1set. 4m straight exhaust ducts, one 90° bend, and one 60° bend.Intake duct :4m straight exhaust ducts, one 90° bend, and one 60°bend. 4m straight chimney and 2 small bends.

Basically the TOOLMASTER versions vary by their tool design, their size of useable surface and the degree of automation. All versions are suitable for high temperatures and optionally equipped with fire protection engineering, which quickly separates the tool in case of energy drop or timeout. KLN also manufactures special machines adapted to your individual requirements. TOOLMASTER "Basic" as well as type HE 50/30 are standard machines. The versions "Advance", "Semi-Automatic" and "Automatic" are made with tools in sandwich design. This makes possible the handling of upper tool, hot plate element and lower tool as a compact unit. They are designed particularly for quick and frequent production changes. The HE/SA has a horizontal concept with servo-drive technology for quick and precise movements. The TOOLMASTER CC has been developed for applications with two welding tasks in one cycle. Almost all machine versions can be provided with pneumatic or servo-motor drives.

UPS series MINI are designed for uninterruptible power supply of critical loads with high power density server and network equipment, voice and data networks, medical equipment and entrylevel industrial installations. The MINI series is a new generation of UPS with double conversion (online) topology and fully digital control, which provides a high level of protection for the continuous operation of the connected load, which prevents costly downtime. In keeping with high fire safety requirements, the MINI series IMPULSE UPS enclosures are made of impactresistant, fireresistant ABS plastic. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.

UPS IMPULSE series SLIM 5004200 VA is a series of highly efficient, reliable and affordable UPS lineinteractive topology with sinusoidal output signal. Thanks to the builtin AVR voltage stabilizer, all models of the SLIM series maintain the output voltage within the normal range at undervoltage or overvoltage of the mains, optimally using the battery resource. This allows not only to provide guaranteed stable backup power in case of voltage loss in the incoming network, but also to protect critical equipment from damage that may result from voltage surges. Following the high requirements of fire safety, the enclosures of the IMPULSE UPS of the SLIM series are made of impactresistant ABS plastic with fireresistant properties. This inherently ensures the shock resistance and fire safety of the electrical protection equipment.