Flexible insulation - Import export

indoor and outdoor use: protection of industrial or commercial floors Advantages: flexible antislip soundproofing and thermal insulation improves walking comfort shock absorber porous, facilitates drainage easy to maintain and insensitive to water

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties The very high elastic modulus for small deflections in building elements

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties The very high elastic modulus for small deflections in building elements

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll Excellent for restoration application due to flexible and easy installation properties

Our flexible grids in combination with a variety of different coatings and fillers provide high tensile strength, improved bonding to the matrix, increased impact resistance, and strong crack resistance. Our standard meshes are used in a wide range of applications such as outside thermal insulation systems, indoor plaster strengthening, repair of walls, floors, and ceilings. We are able to produce special variants when additional mechanical properties are needed. Our products have certificates according to EU standards. Good high alkaline resistance Certified according to EU standards For interior and exterior reinforcement High mechanical strength Outside thermal insulation Flexibility without compromising strength Easy installation onsite as it comes in a roll

Isoseal ® tapes are thermal shrinkable laminates of different construction with epoxy-resin impregnation. ISOSEAL® is mainly used for protecting the overhang part of low and high voltage coils and bars against ambient stress and wherever a flexible waterproof insulation is required.

We can offer flexible heating elements manufactured from three different insulation materials: silicone, polyimide (Kapton) or polyester. Each of these materials possess different properties which make them suitable for diverse applications. Silicone heaters can also be produced in very large sizes, whereas polyimide is significantly thinner and polyester unbeatable in price when it comes to high quantities. All three of them are bespoke products made according to your needs, so within the bounds of what is technically feasible you as the customer can determine almost every feature of your heater. This can include; voltage, wattage, dimensions, shape, sensors, leads, plus much more. Due to their low thermal mass flexible polymer insulated heaters distinguish themselves by a very short response time and excellent controllability.

This inline thermocouple can be individually installed. For measurements in the wiring harness, on difficult to access points or on the smallest components. The wire facilitates very flexible installation. The fibreglass insulation facilitates routing the probe along very hot components (Tmax. 450 °C). The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +450 °C Wire type: Fibreglass/fibreglass, 0.5 mm, wire, Tmax: +450 °C

This inline thermocouple can be individually installed. For measurements in the wiring harness, on difficult to access points or on the smallest components. The thin wire facilitates very flexible installation. The fibreglass insulation facilitates routing the probe along very hot components (Tmax. 450 °C). The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +450 °C Wire type: Fibreglass/fibreglass, 0.2 mm, wire, Tmax: +450 °C

Technical information The Crimper-LS is an electropneumatic and flexible benchtop crimper for loose insulated Z+F ferrules in the cross-section range from 0.5 – 2.5 mm² (AWG 20 – 14) and crimping length from 6 – 12 mm. Additional tool kits are available optional for 0.34/4 mm² (AWG 22/12). The machine is characterized through a short cycle time and an easy tool change. A stripped wire can be fed in the ferrule directly. The crimping process is started by a footswitch.

Rubber plasterboard profile sound insulation tape is used in sound insulation applications. It prevents vibration by using it at the junction of the carcass and plasterboard. Rubber Sound Insulation Tape is assumed to be for joining joints between sections of flexible pipe insulation; However, this is definitely not the recommended use for this product.

Certain Group Building Systems Belli Group Building Systems offers a wide variety of window and door alternatives. Aluminum window and door systems offer maximum flexibility in design, insulation and other product performances. Whether you choose a fixed panoramic window, double-hung or parallel-hung window, you can be sure that they are all designed to deliver maximum performance and aesthetic appearance. It allows you to choose the perfect solution for your home with different design options and wide door handle alternatives.

Flexforce™ power cables are flexible composite cables designed for applications where high currents have to be carried. Their main advantages are as follows: high current carrying capacity, very good resistance to cut-through, to high temperature (150 C°). Possibility of shielding for excellent EMI protection. Resistance to fluids (hydraulic liquid, mineral oil, gasoline, diesel). Flexforce flexible power cables are made up of extra-flexible tin plated copper conductors insulated with FEP or Axon's special high temperature thermoplastic ASC15 and including separating tapes.

Combined press paper/polyester (two and three layers) DMD non-saturated and saturated Nomex ®/Mylar ®/Nomex ® 50µm and 80µm (NMN) Interphase insulation NMN411 Nomex ®/Kapton ®/Nomex ® (NKN) With self-bonding coating

Vulcanised fibre (95°C) Pressboard (PSP) in rolls and sheets (105°C) Nomex ® Aramide paper

Vulcanised fibre (95°C) Pressboard (PSP) in rolls and sheets (105°C) Nomex ® Aramide paper

KD 500 (500°C) with cured ceramic insulation. Flexible high-temperature winding wires for the production of small self-supporting winding components.

Product Features: • Perfect for high frequency filtering applications. • High permeability core ideal for applications under 50 kHz. • High self-resonant frequency values. • Operating Frequency: 60Hz. - 10kHz. • Some models feature universal channel mount packaging with flexible insulated leads (6" min.). • Some models feature rugged construction with aluminium base and stainless steel band along with open-style terminals for maximum versatility.

Military and security staff uniforms, in particular, have specific functional needs to match the activities of personnel as well as the environments in which they are operating such as camouflage, thermal insulation, flexibility, breathability and durability. Our manufacturing facilities and supply chain partners have highest technological capability, professional design and customization flexibility to suit your most demanding requirements.

Product Features: • Designed for push-pull tube output circuits. • Enclosed (shielded), 4 slot, above chassis Type "X" mounting. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • Manufactured with plastic coil forms for coil support and insulation. • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. • Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications.

Product Features: • "Over designed" for high fidelity, single ended, Class-A, tube output circuits (triode, tetrode or pentode tubes). • Enclosed (shielded), four slot, chassis Type "X" mounting. • Frequency response at least 20 Hz. to 20 Khz. at full rated power (+/- 1 db max., ref. 1 Khz). • Insulated flexible leads 8" min. • For maximum versatility, all units (except the 1642SE and 1638SEA do NOT include this screen tap as they were designed principally for high impedance triode tubes. • High quality laminations, (M6) grain oriented silicon steel. • Core is gapped to reduce core saturation in Class-A tube amplifier circuits.

Product Features: • Designed for push-pull tube output circuits. • Enclosed (shielded), 4 slot, above chassis Type "X" mounting. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • Manufactured with plastic coil forms for coil support and insulation. • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. • Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications.

Product Features: • Small, economical, open, two hole horizontal bracket mount. • Insulated, colour coded flexible leads, 4" long minimum (143, 144 and 145 Series) or 3" long minimum (146 Series). • Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.). • When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher. • Net weight: 0.5 oz. (143, 144, 146 Series) and 1.4 oz. (145 Series).

Product Features: • Designed for push-pull tube output circuits. • Units are designed to provide ample "headroom" at bass frequencies (note the weight of each transformer). • All models have a secondary tapped fro 4, 8 or 16 ohm outputs. • Enclosed (Shielded), 4 slot, above chassis Type "X" mounting. • Manufactured with plastic coil forms for coil support and insulation. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • All units (except the 1650G) include 40% screen taps for Ultra-Linear operation (if desired). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. The 1650G does NOT have primary screen taps and will not support "Ultra Linear" applications.

Contact adhesive for bonding flexible pipe insulation materials (Armaflex, Climaflex, Tubex, etc).

Dualflex Blanket is made of ceramic fiber, lightweight, wool-like material. Its main components are SiO2 and Al2O3. It is made from completely inorganic materials, so even at the first heating up, no smoke is produced. Chemical Impact Insensitive (Except for Hydrogen Fluorides, Phosphoric Acids and Concentrated Alkalines). TYPICAL APPLICATIONS High temperature furnace, glass melting furnace, boiler Flexible insulation on pipes and smoke pipes Fire protection systems High temperature gaskets Removable insulating cover on machine parts