Structures- aluminium - Import export

The connecting sets are used to connect two aluminium profiles at right angles. They allow free position of the profiles. The profile slots positioned at rightangles to each other remain free. Panel elements can be positioned in the profile slots without additional machining. Due to the reduced clamping force and omitted rotation locks, these connecting sets should only be used in combination with panel elements and lightly loaded constructions. Low workload. To assemble a hole must be drilled into one of the profiles. The D2 hole can also be drilled through.

The aluminium profile is matched to the roller elements. As a result, roller rails and roller tracks can be realised. The different inserts permit modular and flexible setup.

Lightweight aluminium profile for weightoptimised constructions.

The aluminium profile is matched to the roller elements. As a result, roller rails and roller tracks can be realised. The different inserts permit modular and flexible setup.

Aluminium profile for general constructions.

Aluminium profile for general structures. The round tube, also referred to as a profile tube forms a feed roller when used in combination with bearing flanges (10400).

The connecting sets are used for connecting two aluminium profiles at right angles. The connection is nonrotating. For larger profiles several connecting sets can be mounted on the end for greater strength Low workload. Cut a thread in the end face core hole. Drill a through hole for tightening the screw in the opposing profile.

Slot key, grub screw and serrated washer, steel. Nut and washer, brass. Version Slot key, grub screw and serrated washer, electro zincplated. Note For protecting installations and persons. Connectors for earthing aluminium profile structures and interconnecting the aluminium profiles by integrating them into the protective earth (PE) system. Conductive contact is established through defined destruction of the oxide layer in the slot base and on the slot flanks. The cable lug must be positioned between the serrated washer and the washer during assembly.

Sliding carriage Base structure in extruded section, aluminium EN AW6060. Sliding elements Maintenance free plain bearing iglidur® J. Version Eloxalcoated E6/EV1. Black thermoplastic Note With a low rate of inerita, high accelerations and short term extreme speeds up to 30 m/s are possible. DryLin® T linear glide guides are resistant to dirt and corrosion and are adjustable, maintenancefree and quiet. Application temperature max. 80 °C. As no lubricants are used they are recommended for use in food, medical, and clean room technologies. Manual clamping was developed for simple functions. Polymer under constant pressure has a tendency to creep which causes a decrease in clamping force over time (up to 70%), which means that no safetyrelevant parts should be clamped. Suitable guide rails see 21200. Drawing reference 1) manual clamping

Developed to meet the needs of small and even very small budgets, the COOL range has been developed around a range of 3 harmonious and dynamic colours. A compromise between a refined design and a selection of quality materials, the Cool range retains the essentials: a 60x60 aluminium post structure, 15 mm thick anti-slip HPL floors and stainless steel screws (single diameter, anti-theft and anti-vandalism system). It is available with several floor heights from 0.60 m to 1.20 m and from 1 to 4 towers. With its soft colours and classic lines, the COOL range provides qualitative playground solutions accessible to all customers.

Designed for fine, precise, intensive works in small formats, the CharlyDMCII milling machines are used for many applications: metal engraving, fine machining, plasturgy, design, rapid prototyping, electronics… STRENGTHS • Rigid steel/cast aluminium structure. • Double guide grinded steel prismatic rails and preloaded ball beatings. • Transmission by ball screws. • Fixed table / mobile gantry kinematics • Available in servo-brushless motorization. • Economical version with step by step motorization. • Design and ergonomy. • Small footprint. • Available with automatic tool change. • Very high frequency spindle for machining and fine works. • Parts held by vacuum table (option). • ISO programming, industry standard. • Machining of soft materials and metals. • Quality and industrial performances of Charlyrobot machines. • Compliant with European safety directive Machine 2006/42/CE. Models DMCII 301/303 DMCII 601/603 DMCII 6121/6123 X stroke 310 mm 610 mm 610 mm Y stroke (without...

The rigour and the accuracy for the industrial works, the polyvalence and the simplicity for a maximum of profitability. Designed for the accurate and intensive works, they allow a wide field of applications : metal engraving, fine millings, design, prototyping Refer to the exemples of applications : Moulds and models Health case or box Side windows Aircraft interior furnishing Jewels engraving Masks Household appliances Lights Furniture Aluminium frames The strengths • XYZ stroke 310 x 430 x 120 mm (DMC300) - "Y" reduced to 250 mm in case of automatic tool changer.
 • XYZ stroke 600 x 610 x 120 mm (DMC600) - "Y" reduced to 420 mm in case of automatic tool changer. • Rigid structure made of steel / Aluminium foundry.
 • Double guiding by prismatic rails in grinded steel with re-circulating ball bearings.
 • Ball screw with pre-stressed sockets. • Cinematics fixed table / mobile gantry.
 • Available in « servo-brushless » motorization.
 • Economical version with stepper...

USE : Works in Tunnel and Underground. ADVANTAGES : Ultra-Lightweight Equipments (Aluminium Structure) easy to use, to transport and very safe to operate. ( APAVE/ VERITAS Inspection Certificate on request). ECR-1 Scaffold may be manually pushed on Track (Railways and Underground/Metros) and it features a security "dead man's" Control Braking Device acting on Wheels simultaneously. Technical Characteristics for ECR-1 : - 1 Aluminium Lorry with Ø 250 mm Aluminium Wheels (RATP Agreed) - 1 Identical Lorry with "Dead-Man's" Control Brake Device acting on 2 Wheels simultaneously - 1 Set of Crosspieces to connect the Lorries - 1 Set of Pipes for the Scaffold itself, with reinforcements ( all aluminium). (available in all dimensions with stabilisators up to 5 m.). - 1 Set Floors (2.60 x 1.90 m.) with ladder and access Trap-Door - 1 Set of Protective Handrails and Safety Bars Mounting and dismounting operated by 2 Agents in 20 min. OPTIONS : - Lateral Extension - Width 0.60 m. (1 or 2 Sid