Aluminium - Import export

Suction lances / suction tubes can be delivered in different diameters right from stock. We also can manufacture according to your drawing and/or sketch or sample. material: stainless steel AISI 304 or aluminium AlMgSi 0.5 F22 in all common tube dimension 40.0 / 50.0 and 60.3 mm right from stock special versions can be realised at short notice and for short delivery]

Based on proven coil anodizing technology from our B57S® product, B73A can be used for shelving, furniture, medical and domestic appliances and many other applications. The surface of Novelis B73A is industrially pre-treated and coil anodised in a continuous process. This ensures a consistent high quality and is therefore the most cost-effective solution for the customer. B73A offers customised solutions with different functional and decorative requirements for the electronic, domestic appliances and chemical industries*. Our delivery program offers a wide product range, including a variety of colours and standard coating thicknesses. Standards are available in 1 ton lots on a short delivery time. *Please note: Due to the hardness of the anodic film, crazing can occur during extreme bending or forming. To minimise the effect more information is available on request.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

ALWA ALUMINIUM BLOCK (resin-based) is made for the thermoforming process (e.g., polystyrene, polycarbonate, acryl, etc.). ALWA ALUMINIUM-BLOCK (resin-based) is characterized by the following advantages: *Good mechanical finishing *High temperature resistance

Aluminium wire We manufacture hard drawn and annealed aluminium wire at our site in Rothenburg/Saale. Materials / DIN EN E-aluminium according to EN 60889 Aluminium-magnesium-silicon alloys according to EN 50183 Aluminium content min. 99.5 % Aluminium for cold forming parts

Square Saver made of ductile and stainless steel casting

Position indicator for telescopic spindle extension, electric, aluminium (13 – 1390 U/Stroke)

Position indicator for telescopic spindle extension, mechanical, aluminium (13 – 1390 U/Stroke)

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

POLIFILM comes with a large product assortment of protection films for added value aluminium surfaces. For this application the quality of the carrier film needs to be very specific due to the sensitivity of the fairly soft aluminium. Our protection films are suitable for mill finish aluminium as well as for glossy and even high gloss, anodized aluminium finishes. In addition to traditionally proven natural rubber adhesive formulations we also offer acrylic adhesive systems including easy peel formula for increased productivity. You may find our product range for painted aluminium surfaces under “ Pre Painted Metals”

High quality aluminium welding wire S Al 5183(A) - AlMg4,5Mn0,7(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 5087 - AlMg4,5MnZr Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 4043(A) - AlSi5(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 5754 - AlMg3 Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 5554 - AlMg2,7Mn(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 4047(A) - AlSi12(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

High quality aluminium welding wire S Al 5356 - AlMg5Cr(A) Diameter MIG wires 0,90 mm - 1,60 mm / 0.035 - 1/16 in. Diameter TIG rods 1,60 - 4,00 mm / 1/16-5/32 in. Various forms of supply available, spools up to 40kg (90lb), drums up to 140 kg(300lb) Approvals: ABS, BV, DNV GL, LR, TÜV, DB

The demand for aluminum is constantly increasing due to its special technical properties. It can be made thinner and thinner as the strength increases. This is accompanied by tight manufacturing tolerances, which require measurement technology with more precision. As a manufacturer of measuring systems for the aluminum industry, Micro-Epsilon offers a comprehensive portfolio based on optical sensors without radioactivity that ensures More Precision in applications regardless of complexity and material properties. Optimized sensor technology tailored to the respective application, innovative mechanical design, as well as cooling and protection devices enable the systems to meet the needs of the processes. The high-performance signal processing and analysis software makes the systems the leading optical gauges on the market which detect the following parameters

The consistent high quality of B57S makes it an excellent choice of anodising quality aluminum. It is designed for many different applications including electronic covers, in the transport and automotive industries, road and advertising signs and equipment housings. Your selection of material is of utmost importance. Finding a high quality product, with a good price/performance ratio, B57S will meet your needs. B57S can easily be cut, drilled, punched, edge-flanged and formed. Welding and brazing should be avoided in visible areas, because the localized heating of the metal will change its structure and affect the anodized finish.

Are you aware of our finishing options for metal and aluminum test specimens? Chemical degreasing, deburring, grinding, turning, milling, punching or blasting – no problem. Upon request, test specimens can be customized and labeled with serial numbers. Contact us to find out how we can help you. By the way: we can manufacture test specimens for the TABER-ABRASER from all kinds of metals.

3 Measurements including 90°, 180° and 45° covers almost all of your needs -Hanging holes on both end makes it convenient to storage and space saving -Provides 0.5mm/m accuracy in the normal position -Aluminium frame enables lightweight, high stability and secure hold while working -High visibility vials, horizontal, vertical and 45˚s for easy and fast operation -Double-side milling for more precise operation -Plastic end caps protect the profile against impact -Ideal for home decoration, DIY, items repairing, wood working, landscaping, hanging painting, TV's and more

3 Measurements including 90°, 180° and 45° covers almost all of your needs -Hanging holes on both end makes it convenient to storage and space saving -Provides 0.5mm/m accuracy in the normal position -Aluminium frame enables lightweight, high stability and secure hold while working -High visibility vials, horizontal, vertical and 45˚s for easy and fast operation -Double-side milling for more precise operation -Plastic end caps protect the profile against impact -Ideal for home decoration, DIY, items repairing, wood working, landscaping, hanging painting, TV's and more

The spirit level is a useful measuring instrument for the realization of various do-it-yourself works thanks to its precision. It allows you to check the horizontality or verticality of a surface, a structure, or a piece of furniture. The spirit level is particularly useful for small jobs such as fixing a shelf, putting up wallpaper, or building a wall but it is also used by plumbers, tilers, or drywallers for professional work. In all cases, the spirit level is mandatory to ensure that your work is level. The Ronix 30 cm spirit level model RH-9411 has 3 measuring scales of 45, 90, and 180 degrees to cover all the user's needs. The hanging holes on both sides of this tool allow the user to measure different angles and flatness of surfaces easily and at high speed. This tool provides 0.5mm/m accuracy in the normal position.