Bolts - Import export

Diameter range of M 12 - M 80 with lengths reaching up to 800 mm. Tailored manufacturing according to specific standards, drawings, and samples. KEBA Fasteners can be coated according to your requirements such as galvanized, phosphatized, or hard chrome plated. Chrome VI free coatings for the automotive industry (e.g. Geomet Plus, Delta-Protect) is also available. Reduced-shaft bolts, pan head screws, square head bolts, fit-bolts, hexagon head bolts, hexagon socket head cap screws, wheel bolts, bearing bolts, threaded bolts, clevis pins with head and many more which can be tailored to customer specifications according to the model or drawing and many more which can be tailored to customer specifications according to the model or drawing.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides

ANSI B16.5 from 1/2″ UNC to 2″ 8UN

Our bolted shelving is a real storage-technology classic and a low-cost alternative to the SCHULTE plug-in system. To assemble the double-sided bolted shelving, angle profiles and shelves are bolted together. The system perforation in the MULTIplus150 and MULTIplus250 versions allows for flexible design with a whole host of accessories. — Bracing with corner angles — Loading and unloading of the stock items possible from both sides — Short picking routes — Assembly through bolting in the shelves — Height of the shelves can be adjusted in increments of 25 mm — Individual adaptation to spatial conditions and to the stored items with 3 shelf widths — Economically priced alternative to the plug-in system

PLACOGRIP® High quality index bolts for the most exacting demands INDEXING BOLT Stainless steel nickel plated SLEEVE Stainless steel KNOB Polyamide black Further RAL – or special colors upon request Also available with lock nuts DIN 439 for index bolts

FTK Förderband Technik Kilian GmbH supplies all known types of elevator bucket bolts concave head bolts as per DIN15237, Ref 70, Fang and Easyfit bolts are manufactured at production facilities in Europe. Because of our large manufacturing volumes and stocks, we can offer you attractive prices and minimal delivery times.

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

RIFBOLT blind rivet studs consist of a sleeve and a screw, which are joined together by welding or crimping. As special production components we can use different lenghts and types of screws can be used as well as almost every rivet nut sleeve. Blind rivet studs offer a multiple use. They can — connect different working pieces, — install a thread into components and — fix additional parts to the screw.

are threaded bolts suitable for the automotive industry and heavy earth moving equipment. Able to endure heavy impact loads Uniformed case hardness to ensure strength and flexibility Precisely manufactured to fit perfectly on spring bushes

All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY

are bolts hot forged from all common materials including stainless, acid resistant and heatproof (inductive hardening, case hardening, quenched and tempered) steel. Diameter range of M 12 - M 80 with lengths reaching up to 800 mm. Tailored manufacturing according to specific standards, drawings and samples.

The KEBAFORM range consists of individually designed engineering solutions resulting in the creation of innovative fasteners. This range fits various requirements, such as holder, stop bolt, distance sleeve, or adjustment element. Multiple phased cold-forming manufacturing processes create a unique and advantageous end product. This know-how and technology allow for a complex fastening element to be formed in up to six blows. PRODUCTION CAPABILITIES • 100% adaptable to any application • Minimization of materials used and inventory costs • Multi-functional use allows for large savings • Simple and efficient assembly • Alternative and replacement of turned parts

STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

SUPRA Pivot bolt clamp W4

SUPRA Pivot bolt clamp W2

GrüloClamp SUPER W1

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

stainless steel*internal thread M 10*Ø 12 mm

Bolt clamp with rubber inlay

This clamp made of galvanized steel is a special clamp for connecting medium and heavy-duty hoses to connectors on mobile and stationary units. Bandwidth approx. 20-25 mm. Band thickness approx. 1.0 – 1.8 mm

A large selection of banjo bolts, connectors and line nipples which you can use for your own construction or as a replacement part for brake and clutch hoses.