Bolts - Import export

Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides

Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

Our bolted shelving is a real storage-technology classic and a low-cost alternative to the SCHULTE plug-in system. To assemble the double-sided bolted shelving, angle profiles and shelves are bolted together. The system perforation in the MULTIplus150 and MULTIplus250 versions allows for flexible design with a whole host of accessories. — Bracing with corner angles — Loading and unloading of the stock items possible from both sides — Short picking routes — Assembly through bolting in the shelves — Height of the shelves can be adjusted in increments of 25 mm — Individual adaptation to spatial conditions and to the stored items with 3 shelf widths — Economically priced alternative to the plug-in system

PLACOGRIP® High quality index bolts for the most exacting demands INDEXING BOLT Stainless steel nickel plated SLEEVE Stainless steel KNOB Polyamide black Further RAL – or special colors upon request Also available with lock nuts DIN 439 for index bolts

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc

STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

made from zinc die cast and malleable cast iron

stainless steel*internal thread M 10*Ø 12 mm

PLACOGRIP® High quality index bolts compact, with stop, proper to small construction dimensions and thin walls INDEXING BOLT Stainless steel 1.4305 SLEEVE Steel gunmetal finish KNOB Polyamide black Further RAL – or special colors upon request PLEASE NOTE Particularly suited for screwing in thin-walled items In this version with stop the button is pulled out, rotated by 90° and secured by the notch Also available with lock nuts DIN 439 for index bolts

We supply tailored, special parts manufactured with our state-of-the-art cold-moulding and extrusion equipment. We can press cold-moulded articles – whether solid, semi-hollow or hollow – according to your drawings. Complex moulded parts and individual, special projects are our strengths. Our cold-moulding competence covers flanged bolts, studded parts, stepped bores and parts with an internal or external thread. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

Parts are made to custom design from drawings, from very small quantities to industrial mass application, pursuant to standards, in a wide range. We supply components in accordance with customer requirements, with a special or knurled surface, and with a range of head forms, such as ring, eyelet, hook, triangle or ligature. Screws, bolts and axles from 1.5 mm to 12 mm can be made with lengths of up to 397 mm; customer lengths available on request (also on request with lock serrations). Knurled axles (knurling either DIN or to customer requirements), threads of M2 to M12 made of plastic or wood or with rolled thread, thick or thin shafts. Ligatures with threads of M2 to M8, or wooden thread with or without weld warts. Rivets and pins with diameters of 1.2 mm to 10 mm, with or without bevelling. Also knurled (knurling either DIN or to customer requirements).

hanger bolts all sizes

T-bolt screw with serration under the head class 8.8, zinc plated

plow bolt with square neck M16 in class 8.8, zinc plated

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and duplicate acceptances (eg works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Threaded bolts DIN 976-1, type A M3 to M6 x 96 mm Double threaded bolts wth a rolled-on unilateral or bilateral thread M2.6 to M10 mm Length of up to 1.000 mm Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

mushroom head square neck bolts as per DIN 603 all sizes