Degreasers - Import export

Suitable for dilution of all solvent-based products. Brush Cleaner cleans and degreases tools, machines and dirty substrates.

Suitable for bio Brush Cleaner cleans and degreases tools, machines and dirty substrates.

Suitable for thinning of all solvent-based products. Special Thinner cleans and degreases tools, machines and soiled substrates. Also suitable for deresination of surfaces (among others larch, pine).

PARTS CLEANING FOR REPAIR AND MAINTENANCEImportant components require thorough and regular cleaning and maintenance, especially in industry, mechanical engineering and the automotive sector. Our TRT 83 x 37 cleaning trough removes grease, lubricants and other residues thoroughly and reliably, before the components are reinstalled. WHICH WORKPIECES CAN BE CLEANED? You can use the TRT 83 x 37 cleaning trough to effortlessly clean workpieces measuring up to 80 cm in length and 30 cm in diameter. Here are some examples: Bearing shells and covers Engine components Gearbox components Shafts and axles Labyrinth rings Bearings, bearing units and bearing housings

Pickling is chemical etching of metal surfaces using an aggressive, alkaline solution to remove applied metal layers or to get an oxide-free surface (activation of the base metal for further coating). Maximum measurements 4000 x 1000 x 500 mm

"Here's where Abraham got his Mustard! The white mustard or yellow mustard (Sinapis alba) is a plant belonging to the cruciferous family (Sinapis). The plant probably originated in Mediterranean areas but is now widespread. The plant is grown as a raw material for mustard or as a green manure crop on fallow land. The Uses of Mustard Seed The whole seed is used for pickling vegetables (such as gherkins) and as a powder for the preparation of mustard (for coarse mustard also combined with mustard seed pieces). Mustard seeds contain sinalbin, the substance that gives mustard its sharp taste. But in yellow mustard seed contains less sinalbin than in black mustard, making the mustards made from yellow mustard seed often mild in flavor. Degreasing, a cold doddle This mustard flour is a cold process degreased, so it only contains up to 15% residual fat (compared to 20%-35% fat in nondegreased mustard flour). The water-binding properties of degreased mu…"

The grill cleaner has a particularly strong cleaning power that degreases surfaces and dissolves and removes even burnt-in residues. Other sizes available on request

Special thinner for degreasing with excellent fat- dissolving properties. Evaporates without leaving any residue. Dissolves and removes paint residues. For degreasing paints of all kinds on work surfaces and materials before painting. The washing dilution can be used in washing-off, dipping, spraying and flooding processes. Other sizes available on request

Removes burned-in and greasy dirt from convection ovens, grills, roasters, and griddles. Other sizes available on request

Removes even stubborn dirt such as grease, oil, roasting and baking residues as well as burnt-in encrustations. Other sizes available on request

Für die perfekte Instandhaltung von Dichtung und Maschine Aktive-Lubricant 210 Synthetic Multifunctional Fluid in State-of-the-Art Formula Characteristics Greasing - due to modern OMC2 additive technology Detergent - penetrates dirt and decomposes any kind of sealing Penetrates corrosion- due to extremely low surface tension Moisture displacing - due to seperation effect between metal and water Anti - corrosive - due to the ultra thin protecting film available as 500 ml Aerosol container 5 l Can Chain and Cable Grease Bright 250 Fully Synthetic Adherent Lubricant Characteristics Excellent wear protection Perfect adhesiveness Chemically stable Penetrates and lubricates No sealing up Water resistant Long term protection against corrosion available as: 500 ml Aerosol container 5 l Can 20 l Cam High Speed Degreaser 310 Residue-Free Evaporating Solvent Cleaner Characteristics For toughest oil and grease contamination Cleans and degreases reliably Fast and residue-free...

Hot solvent vapour is applied to the surfaces of the parts where it condensates, forming a solvent film in which dirt is dissolved. As the solvent condensate runs down along the parts, it takes with it the dirt particles (dust, chips, etc.), leaving behind clean surfaces. This physical cleaning effect results in thoroughly cleaned surfaces.

Degreasing bath treatment Ultrafiltration is established for a long time for applications like treatment of emulsions, degreasing baths or craft detection oils. With ultrafiltration, oil and dirt particles are separated. So, the particle-free filtrate can be used for degreasing again. According to the recommendations of suppliers for degreasing chemicals tensides are added to the degreasing bath. So, lifetimes up to 3 to 6 months can be reached for degreasing baths. Osmo Membrane Systems GmbH offers an upgrade for your degreasing plant in replacing the polymer pipe modules by ceramic modules. Ceramic modules are more temperature resistant, chemical resistant and changing pH-values. On the one hand, the separation efficiency will be increased and on the other hand, the lifetime of the degreasing plant will be increased significantly, because polymer modules have to be changed much more, depending on the application. The costs for the upgrade are equal to the costs for working with poly

Oil-water-separation / degreasing bath treatment Treatment of oil-water-emulsions for surface treatment (e.g. pre-treatment of metal parts for ed-paint), recovery companies (e.g. for the treatment of alkaline emulsions for part washing), and so on. Separation of emulgated oil particles and recycling of the cleaned liquid into the degreasing bath Concentration of oil-water-emulsions for disposal Cleaning of the oil-water-mixture for indirect lead-in Principle of this process: Aqueous degreasing baths content a tenside combination, alkalines like soda, caustic soda, phosphate, silicate and further complex molecules. The degreasing bath is loosing its efficiency, when to oil content reaches some g / litre. External pollutions also degrease the degreasing efficiency. By ultrafiltration, the oil content can be separated from the degreasing bath and the oil will be collected in the concentrate. The degreasing bath will be dumped into a buffer tank and then pumped in the working tank of the

Degreasing of voluminous parts with the toploader Clean-o-mat SP 200 for coating pre-treatment Toploader SP 200 with hydraulically cover opening and rinsing device. Here is the possibility toprepare (cleaning) voluminous parts for painting because of the enlargement of the usable hight to 1000 mm and the basket Ø of 2000 mm.

Mobile. Integrated 60 l tank, 5 l concentrate tank, stepless adjustable pressure, metering device for cleaning agent, water shortage control, overheat fuse. Water volume 1,8 l /m. Spray lance with fixed 5 m hose.

Natural, powerful degreaser and all-purpose cleaner with citrus power for intensive cleaning of all smooth surfaces. Can be used without reservation on kitchen work surfaces. Dosage Spray from a distance of approx. 20 cm and wipe thoroughly with a wet cloth. For best results, use a lint-free towel to wipe dry. aqua alcohol* denat. lauryl glucoside decyl glucoside disodium coco glucosid citrate fusel wheat bran/straw glycosides potassium soap glycery oleate parfum potassium citrate limonene linalool