Energy systems - Import export

Combining plant eciency and reduced environmental impact Energy systems from Büttner provide stable process heat for your wood based panel production Process

Versatile multi-axis system designed for feeding machine stations. The Y axis can be realized with a rack and pinion driving system for multiple independent carriages or with a short belt system for connected Z axes. The motion systems can be designed with recirculating ball guides or with bearings depending on loads, dynamics, and different environments. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

Maintenance-free, compact, quiet and cost-saving complete system - the alternative to the busbar system. For the safe guidance of energy, data, air and liquids in ONE system. - Easy to clean - No particle pollution due to abrasion - Quiet, lubrication-free, and easy to install - Operating speeds of up to 6 m/s in high-acceleration applications - Data rates up to 10 Gbit/s. Safely guides FOC and bus cables - Low space requirement

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.

The grid | power V H bloc batteries are suitable for both high-current applications and partial-cycle use. They find applications in power plants and energy supply systems, UPS, switchgear and safety lighting systems as well as for starting diesel and emergency generators and in railroad infrastructure applications. For maximum fail-safety, the negative plates are pocketed. The grid | power V H bloc batteries offer a long service life, increased operational reliability and outstanding performance. The product design according to DIN 40738 ensures maximum compatibility when replacing and expanding existing equipment and battery systems.

The trak | uplift iQ battery is equipped with the trak | collect battery controller, which measures the battery status in real time to increase productivity and operational safety. The current status of the battery is always indicated by an LED display near the battery socket. trak | uplift iQ is Fleet Ready: The battery system communicates with the environment (e.g. charger, PC and vehicle) and transmits battery data for battery and fleet management. In addition, the Smart Charging function ensures high energy efficiency, minimized water and energy consumption. Trak | uplift iQ is the optimal system to reduce your operating costs and CO2 footprint.

The first approach for the development of new processes and the research of scientific effects is the application of standardized laser systems. When the requirements on scientific research advance, they equally rise with regard to the laser systems. For optimum results in scientific research and development, diode lasers with very precise specifications are indispensable. Operating and monitoring the system with defined and fixed parameters such as the power distribution and wavelength is essential for the accurate collection and evaluation of data and will lead to reliable results. Provisioning an outright laser system will further enable scientists to actually focus on their actual research. As complete solution the system can furthermore be directly integrated into the security system, providing a safe operation for your team of experts.

LMF JDN Low Headroom Trolleys The trolley for areas where headroom is restricted Carrying capacities: from 0,5 t up to 6,3 t When only very low headroom is available we recommend the JDN-Ultra-Low Monorail Hoists. Standard Features State of the art by using JDN Air Hoists PROFI TI as well as a new driving motor Low-maintenance and low-wear operation of the motors by means of a reduction of components No additional motor lubrication required 2-step travelling speed Changeable track width * Advantages Able to negotiate curves Longer cross beams to improve the minimum headroom even with bulky loads Options Rack and pinion drive Spark-resistant package Offshore paint Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose Hose trolleys * Please contact us.

PROFI 6 TI LM JDN Trolleys Carrying capacities: up to 20 t as manual trolleys (LN) for pushing or pulling the trolleys by hand as reel chain trolleys (LH) for moving the trolleys by unwinding the reel chain as motorised trolleys (LM) powered by an air motor Standard Features easy to install with anti-climb and anti-drop devices robust and with little maintenance able to negotiate curves Options Rack and pinion drive 1 Spark-resistant package 2 Offshore paint 2 Energy Feeding Systems The energy can be fed by various different systems: Energy chain C-shaped rail Square rail Spiral hose 1) From LM 3.2t upwards 2) Not available for LN 1t

A drive motor can also act as a generator. If the drive system is built so as to allow reverse power to flow then this power can be fed into a resistor, thus taking energy out of the system and causing whatever is driving the motor to slow down. Following to this the braking resistor converts the stop energy into heat. Electrical drive systems are being used more and more on ships, oil rigs, crane barges and offshore vessels of all types. An important benefit from using an electric drive is that reliable systems of regenerative and dynamic braking resistors are available to complement or replace traditional mechanical braking systems. The advantages of electric braking include control, reliability, mechanical simplicity, weight saving and in some cases the opportunity to make use of the regenerated braking energy. The Braking Resistor Units from Klöpper Therm are designed according to specific applications.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

Short description: Sewer cleaning and inspection carried out simultaneously Wireless camera system consisiting of a TV-camera and a sewer cleaning nozzle. Sewer cleaning and TV-inspection are carried out simultaneously. The information gained by the optic control are primarily used for the optimization of the cleaning performance. At the same time an overview of the canal´s current condition is supplied by every cleansing interval. Due to the on-bord-energy-supply, the system can work without a time limit.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

Kaplan turbines are typically used for river power plants on calm waters. The blade angle runner blades (Kaplan blades) is adjustable. The pressure of the water flow, which is controlled by the guide vanes of the upstream wicker gate, can then be efficiently converted into energy. The bidirectional MANOY® system seal WP, type 444, in the form of a continuous ring was developed to protect the hydraulic adjustment device and prevent hydraulic fluid leakage. Type 449 is particularly useful for maintenance work because rather than being continuous in circumference, the seal is open and has a guide blade.

The grid | power V H series is particularly suitable for UPS applications with discharge times in the short-time range (1 minute to 3 hours) without falling below the permitted final discharge voltage. grid | power V H is the optimum solution for high-current applications and partial-cycle use. It is typically used in power plants and energy supply systems, UPS and switchgear. Extremely extended water refill intervals up to maintenance-free, high-energy density and long service life characterize the grid | power V H batteries. In summary, the grid | power V H can save time and resources and reduce investment costs.

Crane Installations Energy capacity 450 Nm/cycle Stroke max. 62 mm For even more protection: The profile dampers from the TC range of the ACE TUBUS-Series can also be used as safety dampers. These maintenance-free, ready-to-install damping elements made of co-polyester elastomer have been specially developed for use in crane systems and fulfil the international industry standards OSHA and CMAA. In the special TC-S design, managed to achieve the spring rate required for crane systems with the unique dual concept. Whether TC-S or TC, this range of models represents a cost-effective solution with high energy absorption for energy management systems. The very small and light design of Ø 64 mm to Ø 176 mm progressively covers energy absorption within a range of 450 Nm to 17,810 Nm.

EPP hybrid solar systems consist of EPP solar panels, hybrid inverters and storage capacities that enable you to store solar energy and use it when you are at home when the grid goes out. The ability to store and use the solar energy when desired is called self-consumption.

EPP hybrid solar systems consist of EPP solar panels, hybrid inverters and storage capacities that enable you to store solar energy and use it when you are at home when the grid goes out. The ability to store and use the solar energy when desired is called self-consumption.s

EPP hybrid solar systems consist of EPP solar panels, hybrid inverters and storage capacities that enable you to store solar energy and use it when you are at home when the grid goes out. The ability to store and use the solar energy when desired is called self-consumption.