Lifting heads - Import export

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement. Different support arms, swivel arms and telescopic support arms are available, based on the load to be supported (monitor weight, torque support). The basic version has one support tube for loads of up to 10 kg , and the twin version has two support tubes for loads of up to 25 kg.

• Individually adjustable, comfortable headgear • The forehead guard extends well above the head and is made of high-quality polypropylene • The face shields are attached with an eccentric knob to the forehead guard and can be lifted • The head width is adjusted by means of a ratchet wheel • The head height can be adjusted with a perforated strip • The forehead padding is replaceable

713E \ 726E \ 745E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER – ERGOPACK TOOL-LIFT – SEALING HEAD We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700E WITH – ELECTRONICALLY CONTROLLED DRIVE & CONTROL VIA JOYSTICK – 24V AGM BATTERY PACK – CHARGER We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site. 700 WITH – MANUALLY DRIVE VIA A HAND CRANK We will be happy to discuss the individual configuration of your system in person after a product demonstration at your site.

Description NC-two-axis positioning milling head KFU-D4/90/X P=40 kW, n=5,000 RPM, M=1,200 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1°/ 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D4/45/X P=40 kW, n=5,000 RPM, M=1,200 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1°/ 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm A-axis / Axis 2 (45°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D3/45/X P=30 kW, n=5,000 RPM, M=800 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1°/ 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 7,500 Nm A-axis / Axis 2 (45°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 7,500 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-single-axis positioning milling head KF-D4/90/X P=30 kW, n=5,000 RPM, M=1,000 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 9,500 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-single-axis positioning milling head KF-D2/90 P=13 kW, n=1,500 RPM, M=400 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 with automatic tool clamping - with external coolant supply - Lubrication: grease lubrication A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 7,500 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=315 mm : 0.030 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D8/90/X P=80 kW, n=2,000 RPM, M=2,600 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D8/45/X P=80 kW, n=2,000 RPM, M=2,600 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm A-axis / Axis 2 (45°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-single-axis positioning milling head KF-D8/90/X P=80 kW, n=2,000 RPM, M=2,600 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D5/90/X P=50 kW, n=3,000 RPM, M=1,700 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-two-axis positioning milling head KFU-D5/45/X P=50 kW, n=3,000 RPM, M=1,700 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system C-axis / Axis 1 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm A-axis / Axis 2 (45°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 12,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm

Description NC-single-axis positioning milling head KF-D5/90/X P=50 kW, n=3,000 RPM, M=1,700 Nm Construction principle: - NC positioning lift-off milling head with hirth serration ring - Positioning the main spindle of the machine - SK 50 (HSK 100) with automatic tool clamping - with internal and external coolant supply - Lubrication: minimum oil/air lubrication - Option: axis measurement system A-axis / Axis 2 (90°) - Swivel range: n x 360° - Pitch: 360 x 1° / 144 x 2.5° - Positioning accuracy: ± 3" - Tangential stress: 10,000 Nm Accuracy - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm