Laser apparatus and instruments - Import export

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA532-250 is a high-peak power MOPA with a peak pulse power of over 180 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA1064-2000 mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 140 µJ single pulse energy and an average power of up to 2 W. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FTSS355-300 laser delivers 300 µJ pulse energy at a maximum repetition rate of 20 Hz and a pulse width of 1.7 ns, i.e. a peak pulse power of 175 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FDSS532-1000 laser delivers 1 mJ pulse energy at a repetition rate of 20 Hz and a pulse width of 1.8 ns, i.e. a peak pulse power of 550 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FDSS532-150 laser delivers 150 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.2 ns, i.e. a peak pulse power of 125 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The DUV MOPA266-50 is a high-peak power MOPA with a peak pulse power of over 50 kW. It delivers 50 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

The DPSS-CW-DUV laser FQCW266-10 delivers an output power of 10 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 2 mW to 12 mW in 0.1 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q2 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 10 kHz. The pulse energy is 0.1 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The DPSS-CW-DUV laser FQCW266-200 delivers an output power of 200 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers from 10 mW to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 20 mW to 220 mW in 2 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FDSS532-Q2 laser emits pulses with a pulse width of approx. 1 ns at 532 nm and can be modulated from single shot to 10 kHz. The pulse energy is 6 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FDSS532-Q3 laser emits pulses with a pulse width of approx. 1 ns at 532 nm and can be modulated from single shot to 2.5 kHz. The pulse energy is 20 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The eMOPA product series is based on a diode-pumped, passively Q-switched solid-state laser as the master oscillator and a downstream diode-pumped power amplifier with a patented optical design. Wavelengths from the DUV to the green spectral range can be generated for this series: 213 nm, 266 nm, 355 nm and 532 nm. The eMOPA355-100 emits pulses with a pulse width of around 1 ns and 100 µJ pulse energy. The average output power is 100 mW in transverse single-mode operation at a wavelength of 355 nm and peak pulse powers of >80 kW. The repetition rate can be adjusted from single shot to a maximum of 1 kHz by external triggering or the supplied software. The eMOPA is ideal for 24/7 industrial use and is primarily used in ophthalmology. By adapting the lasers to the requirements of our customers, a wide range of applications is possible, such as photoacoustics and ophthalmological markings.

The DPSS-CW-DUV laser FQCW266-25 delivers an output power of 25 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 3 mW to 30 mW in 0.3 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FDSS532-Q4 laser emits pulses with a pulse width of approx. 1 ns at 532 nm and can be modulated from single shot to 1 kHz. The pulse energy is 42 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The DPSS-CW-DUV laser FQCW266-300 delivers an output power of 300 mW in single-mode operation at a wavelength of 266 nm. Other models in the high-power series are available with optical output powers of up to 1 W. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 30 mW to 300 mW. The power consumption of the laser is less than 450 W. The laser comes with a software for control of the main functions by a PC.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q1 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 20 kHz. The pulse energy is 0.05 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FTSS355-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 60 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q4 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 1 kHz. The pulse energy is 2.5 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA355-200 is a high-peak power MOPA with a peak pulse power of over 140 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS266-Q1 laser emits pulses with a pulse width of approx. 1 ns at 266 nm and can be modulated from single shot to 20 kHz. The pulse energy is 0.3 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q2 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 10 kHz. The pulse energy is 20 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS266-Q2 laser emits pulses with a pulse width of approx. 1 ns at 266 nm and can be modulated from single shot to 10 kHz. The pulse energy is 0.8 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q1 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 20 kHz. The pulse energy is 10 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q3 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 2.5 kHz. The pulse energy is 50 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FTSS355-Q1 laser emits pulses with a pulse width of approx. 1 ns at 355 nm and can be modulated from single shot to 20 kHz. The pulse energy is 0.3 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FTSS355-Q2 laser emits pulses with a pulse width of approx. 1 ns at 355 nm and can be modulated from single shot to 10 kHz. The pulse energy is 3 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FTSS355-Q3 laser emits pulses with a pulse width of approx. 1 ns at 355 nm and can be modulated from single shot to 2.5 kHz. The pulse energy is 15 µJ @ 1 kHz. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q4 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 1 kHz. The pulse energy is 90 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The DPSS-CW-DUV laser FQCW266-50 delivers an output power of 50 mW in single-mode operation at a wavelength of 266 nm. Other models in the low-power series are available with optical output powers of up to 200 mW. Compared to the 266 nm CW lasers from other manufacturers, the FQCW266 systems are characterized by a long coherence length of more than 1000 m, a narrow line width of < 300 kHz, and a sealed design that ensures reliable operation without the need for subsequent adjustments of the internal optics. Due to the sealed housing, the lasers require very little maintenance and are particularly suitable for industrial 24/7 operation. The central wavelength is in the range of 266.02 nm and 266.07 nm (in air). The output power can be adjusted from 5 mW to 55 mW in 0.5 mW increments. The power consumption of the laser is less than 160 W. The laser comes with a software for control of the main functions by a PC.