O-rings - Import export

We manufacture customer-specific molded parts made of rubber, silicone and elastomer composite parts in small and large series production according to your sample or drawing. Molded rubber parts are generally characterized by their good formability, chemical resistance, pressure and abrasion resistance and good electrical properties. We advise you in detail on the selection of the suitable material, with a view to the functional description, temperature resistance, chemical requirements, weather influences and resilience. Our molded parts are used in all industries, such as the automotive industry, medical technology, mechanical engineering and electronics industry. We offer customized parts: Protective covers for input devices, Rubber seals and rings, Grommets, flanges, bellows, Form Tubes, Rubber damper, PU molded parts (e.g. wheels and rollers) Combined rubber-metal parts / rubber-plastic parts, etc.

O - ring seal as flexible perfection To determine which O - ring can be used , only a few important operating parameters must be defined . The temperature , the pressure and the indication of the chemical resistance determines the selection of the correct O - ring at the right application. O - rings from Billi - seals are distinguished , depending on the material , by high thermal stability, good chemical resistance and good low temperature flexibility.

ORing in material NBR, FKM, FFKM, VMQ, EPDM, ect.

Rubber Seals - O ring

XXL O‑rings are typically used as static radial or static axial seals in mechanical, power plant, plant and heavy equipment engineering. The special stagevulcanization production technology is also suitable for single or small lot production of smaller O‑rings with a nonstandard inside diameter.

The encapsulated O‑ring widens the potential applications of the O‑ring. The core of the ring is made of silicone (VMQ) or fluoroelastomer (FKM). The plastic FEP (tetrafluoroethylenehexafluoropropylene) is used for the seamless encapsulation. The particular product advantage lies in the combination of the elasticity of the O‑ring and the chemical resistance of the fluoroplastic.

Category Diesel technology / Sealings and service parts for KHD-motors / O-rings, silicon Product number supplier 120209

Category Diesel technology / Sealings and service parts for KHD-motors / O-rings, silicon Product number supplier 120208

powdercoated*wire Ø 4 mm*nickel plated brass screw

Category Sealings / O-Rings / 70 shore NBR / Imperial Product number supplier 415345

Dichtungen für Waschgeräteschlauchnippel Category Sealings / O-Rings / 70 shore NBR / Metric Product number supplier 415296

steel, 8 mm Ø*zinc plated*three point support

steel, 8 mm Ø*zinc plated*three point support*nickel plated brass screw

Dichtungen für Waschgeräteschlauchnippel Category Hydraulic hoses and fittings / Cleaning technology / Jet clean fittings / Sealings for jet clean hose fittings Product number supplier 415480

Dichtungen für Waschgeräteschlauchnippel Category Sealings / O-Rings / 70 shore NBR / Metric Product number supplier 415296

These sliding rings are the solution for designs which only allow room for a small or low housing. They are ideal for retrofitting into existing O‑ring grooves

With internally protected sealing lip. With O‑ring for sealing in the groove base. For high peripheral speed and increased chemical resistance

Turned parts with mechanical finishing. Ground, hardened, welded, soldered. Pre-assembled with sealing elements and O-rings.

The mini cylinders of the CH series are cylinders with extremely reduced dimensions. For space-saving screwing, also with O-ring seals, in shaped holes or for panel mounting.

Pleated Filter Cartridge Type: PPA Pleated PP-Membrane or nonwoven PP support nonwoven Hard cage Core + end caps made of 100 % polypropylene, meet requirements of FDA guidelines. Thermal welding processes seal all components No adhesives or extractable materials Version: DOE SOE 226 – O-Ring / Bayonet / Spear P7 SOE 222 – O-Ring / Flat P3 SOE 222 – O-Ring / Spear P8

Fast cycling assembly machine 10 stations with O-ring assembly. Cycle time 1.7 sec.

Due to the 24° taper (with o-rings) located on the fitting body itself, STAUFF Connect Tube Fittings with 24° Taper / O-Ring (DKO) represent a logical further development of traditionally available adjustable standpipe tube fittings with factory-assembled cutting rings and union nuts. The retention function is assured by a special swivel nut with a wire-pin located in a groove, which is factory-assembled by the manufacturer. The embedded o-ring on the 24° taper ensures a high level of protection against leakage. Thanks to the large number of available types and designs, almost all common types and combinations of adjustable fittings can be implemented. With regards to their dimensioning and general design, STAUFF Connect Tube Fittings with 24° Taper / O-Ring (DKO) fully comply with the latest versions of the ISO 8434-1 standard. They are thus completely interchangeable with conventional adjustable standpipe tube fittings.

Vacuum flow sight glass type N880V with O-ring seal for vacuum applications

TNZ ZCA: Double engagement design with integrated O-ring seal The TSCHAN® TNZ ZCA coupling is a torsionally stiff gear coupling designed to have some backlash and consists of two coupling halves that are connected by fitted bolts. TNZ ZCB: Double engagement design with a bolt-on O-ring carrier for ease of installation Unlike the TNZ ZCA coupling, the TNZ ZCB comes with a bolt-on O-ring carrier which facilitates installation by changing the mounting sequence. For mounting the coupling, unscrew the cover and place it on the shaft. Mount the hub onto the shaft, slide the sleeve onto the hub and fasten the O-ring carrier to the sleeve. This way of mounting is advantageous when large couplings are involved.

Double engagement sleeve coupling with an integrated or bolt-on O-ring carrier and two elongated universal hubs The model TNZ ZCHUU consists of a one-piece housing with O-ring carriers arranged on both sides, and two elongated universal hubs. If required, the elongated hubs can be adapted to the plant requirements.

Double engagement sleeve coupling with integrated or bolt-on O-ring seal and one elongated universal hub The model TNZ ZCHU consists of a one-piece housing with O-ring carriers arranged on both sides, and one elongated hub and one standard hub. If required, the elongated hub can be adapted to the plant requirements.

The model TNZ ZCH consists of a one-piece housing with O-ring carriers arranged on both sides, and two hubs of the TNZ ZCA coupling.

Unlike the model TNZ ZCAUU, the coupling TNZ ZCA has two elongated hubs the length of which can be adapted to the plant requirements. TNZ ZCBUU: Double engagement design with a bolt-on O-ring carrier for ease of installation and two elongated universal hubs Compared to the TNZ ZCAUU, the coupling model TNZ ZCBUU is equipped with an O-ring carrier which facilitates installation by changing the mounting sequence. For mounting the coupling, unscrew the cover and place it on the shaft. Mount the hub onto the shaft, slide the sleeve onto the hub and fasten the O-ring carrier to the sleeve. This way of mounting is advantageous when large couplings are involved. Like the model ZCAUU, the ZCBUU has two elongated hubs the length of which can be adapted to the plant requirements.