Portable power tools - Import export

• Drill-on of the blind rivet nut with reduced torque and automatic switch-off • Triggering the setting process clearly separated from the drill-on action • Automatic drill-out function after the end of the setting process • Drill-off with high torque • Sturdy, compact and shockproof tool housing Ergonomics • Fatigue-free working through well balanced weight repartition and ergonomic grip • Easy stroke adjustment With Li-Ion energy • Battery with 2.0 Ah (standard) or power battery with 4.0 Ah as special accessory • No memory-effect • High energy yield due to high voltage • Low weight allows for extremely easy and fast operation • Extremely low self discharge • New battery shape allow the tool to be stored standing on its battery • Simple and safe drilling of the blind rivet nuts • Constant setting speed • Automatic switchover from setting to drilling • Fast and simple change system for threaded mandrels

The FireBird® Gold Edition sets blind rivet nuts up to M8 all materials with 20.000N traction power • Drill-on of the blind rivet nut with reduced • torque and automatic switch-off • Triggering the setting process clearly • separated from the drill-on action • Automatic drill-out function after the end of the setting process • Drill-off with high torque • Sturdy, compact and shockproof tool housing Ergonomics • Fatigue-free working through well balance weight repartition and ergonomic grip • Easy stroke adjustment with Li-Ionen-Energy • High energy yield due to high voltage • Low weight allows for extremely easy and fast operation • Extremely low self discharge • New battery shape allow the tool to be stored standing on its battery • Constant setting speed • Automatic switchover from setting to drilling • Fast and simple change system for threaded mandrels More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

With a force of 15,000 N and the tried-and-tested brushless motor, the FireBird® Pro CAS is powerful and fast when setting blind rivet nuts of up to M8 steel. Since no wear-prone brushes are used, the motor has an extremely long service life, is virtually non-wearing and reliably guarantees the fastest setting frequencies. The setting tool is controlled solely by the setting force adjustment. The thread of the blind rivet nut is therefore optimally protected while ensuring the blind rivet nut is securely anchored in the material. With the 18-volt battery power supply, the tool is suitable for flexible, cordless use on construction sites and in industrial manufacturing. The mechanism for triggering the riveting process is functionally separated from the drilling process and, once the riveting process is complete, the FireBird® Pro CAS provides an automatic drilling function. More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

The FireBird® Pro S Gold Edition with mechanical setting stroke adjustment. When setting a blind rivet nut size of the same length in consistent material thicknesses constant setting stroke should be used. The setting stroke corresponds to the distance the mandrel is drawn into the nose piece during the setting process and thus how far the blind rivet nut is upset. With the setting stroke adjustment this path can be set mechanically on the setting tool. Customer benefits of setting stroke adjustment: • Device control via setting stroke adjustment guarantees a constant height of the blind rivet nut after setting • Stepless setting of the setting stroke • Setting stroke adjustment is preferred above all by experienced users and for large production runs Technical data, working range and advantages are analogous to FireBird® Pro Gold Edition More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

The MZD 25/3 PH portable clinching pliers are light in weight, ergonomically designed and extremely sturdy. As they are controlled with one hand, they can be used at points that are otherwise difficult to access. The pliers have been specially designed for mobile use. The joining direction (punch and die position) is changeable. The clinching pliers are driven by our pneumohydraulic pressure booster PHD-002. • Handy, sturdy design • For mobile application • One-hand operating device • Joining direction (punch and die position) are changeable This offer includes: Portable clinching pliers MZD 25/3 PH Pneumohydraulic pressure booster PHD-002 Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

Special tools: The greatest possible flexibility for individual custom-made products is a matter of course for us. According to your sketch, demand-oriented solutions are created that are precisely tailored to your requirements.

DE-BURRERS Specially developed for processing contours on CNC machines. To de-burr and chamfer metals and plastics. The de-burrers are also suitable for hard machining. Deburrer for contouring. Designed for use on CNC machines, especially for contour machining. For deburring and chamfering of metals and plastics. The de-burrers are also suitable for hard machining. Stocked by default is a point angle of 90 °. 4 - 6 mm de-burrer with 4 cutting edges, from 8 mm with 5 cutting edges.

ENGRAVING TOOLS For engraving plastics and non-ferrous metals. The width must be ground by you, to suit your requirements.Engraving cutter and engraving stylus: For engraving plastics and non-ferrous metals. The ""typeface width"" must be sanded down in-house. Engraving cutter 60 °, point angle 60 °, number of teeth 1, spiral angle 30 ° r."

The question of the ideal milling cutter is dependent upon the material to be machined. A single-tooth cutter is often an advantage for ""soft"" materials (PVC, Perspex, Kömacel, etc), wooden materials (chip- or flakeboard) and non-ferrous metals (soft aluminium, Alcubond, etc.), as the problem of cutting erosion in comparison to clogging recedes. A double flute is better suited to very hard plastics and harder types of aluminium (short chipping). Milling cutters with 4 or more flutes are predominantly used to mill metals. SINGLE-TOOTH MILLING CUTTERS Single-tooth milling cutters are mainly used for machining ""soft"" materials. Their extra large chipping space guarantees an ideal chipping removal and high stock removal rate. MULTI-TOOTH MILLING CUTTERS Multi-tooth milling cutters are used for machining ""harder"" materials. Smoother running is achieved, as several cutting edges are always in contact. The more flutes the tool has, the smaller the individual chippings will be.

Hard reamers 58 to 65 HRC, 1/100 rising, right-hand cutting, straight groove.

The angle head 90° is designed for use in very narrow and confined spaces. The rugged design makes it possible to set blind rivets with a high setting force even in working areas that are difficult to access. The angle head 90° can set standard blind rivets with a diameter up to 6.4 mm in all materials and 8 mm in aluminium with a setting force up to 20 kN. The smallest edge distance is 15 mm, the head length 110 mm. The 17/45 WK nosepiece is included in the scope of delivery as standard. Nosepieces from 17/18 to 17/40 can also be used with the angle head 90°; however, this depends on the working range of the respective tool type (AccuBird® Pro, PowerBird® Pro or PowerBird® Pro Gold Edition). Advantages • Realisation of small edge clearances • High setting force in tight installation areas • Large stroke • Simple assembly • Compact and robust design • Simple jaws maintenance • Use of standard jaws

The brushless motor and 10,000 N of force make the AccuBird® Pro extremely fast for installing blind rivets up to 5 mm in diameter, in any material and up to 6 mm in diameter aluminium. The BLDC motor of the AccuBird® Pro has an extremely long service life and is virtually non-wearing. Compared to commercially available battery-powered tools, riveting can be done up to 4x faster making it comparable with hydropneumatic blind riveting tools. The optional autoreverse function additionally shortens the pulling process, ensuring the AccuBird® Pro is immediately ready for operation. The AccuBird® Pro is also equipped with the low-wear jaws system, which has already proven its worth a thousand times over. You can now get the AccuBird® Pro with the new CAS battery - one battery to operate more than 180 cordless devices! More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

With the brushless motor and 13,000 N setting force, the AccuBird Pro is extremely fast and sets blind rivets up to 6 mm diameter of all materials. The BLDC motor of the AccuBird Pro is extremely durable and almost wear-free. The optional autoreverse function additionally shortens the pulling process and the AccuBird Pro is ready to work again immediately. The AccuBird Pro is also equipped with the low-wear chuck jaw system that has already proven itself thousands of times over. The pressure release ensures that the components to be riveted lie reliably on top of each other without a gap before the riveting process. Furthermore, it is ensured that the blind rivet reaches its final position in the bore before the setting process and that the setting head is in contact. The pressure force can be variably adjusted by springs, depending on the application. In addition, you can now get the AccuBird® Pro with the new CAS battery - one battery for operating more than 180 cordless tools!

The iBird® Pro is the latest tool in the GESIPA® Pro series with the new CAS battery.It can be networked with a smartphone, tablet or PC via an app! The app is available for Android and iOs devices. The iBird® Pro can be connected to three devices at the same time. With a setting force of 15,000 N and the well-proven brushless motor, the iBird® Pro is powerful and fast when setting blind rivets up to Ø 6.4 mm in any material. The optional Autoreverse function additionally shortens the pulling process, ensuring the iBird® Pro is immediately ready for operation. The iBird® Pro is extremely simple to connect thanks to the QR code located on your tool. Simply scan the QR code with the GESIPA® app and the iBird® Pro will automatically connect to your device. The optional setting process assistant from GESIPA® helps operators to adjust the setting process and evaluate riveting processes. More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

It's small, it's fast, it's nimble! And that's not all. The new Birdie® from GESIPA is the smallest and lightest battery-powered blind riveting tool in its performance class. Plus it has an ergonomic design with a balanced centre of gravity and a non-slip, handy handle. Fatigue-free working comes built in! What’s more, the riveting tool covers a wide range of applications: with a setting force of 10,000 N and a tool stroke of 25 mm, the Birdie® makes light work of setting blind rivets with a diameter of up to 5 mm in all materials. And, like the Bird Pro series, the Birdie® works with the tried-and-tested cross-manufacturer batteries from CAS.

AccuBird® – Production • Developed and produced in Germany since 1992 by the inventor of the battery blind rivet setting tool Reliability • Electronic control • No mechanical switching components • Electronic temperature and overload protection • High reliability through low loss power transmission via a highly effi cient ball screw drive Freedom Cablefree tool for fl exible operation in installation jobs and industry production High performance • 10.000 N setting force • High pulling force for safe setting of blind rivets up to 5 mm diameter in all materials • High yield per battery charge • Large 20 mm stroke Versatility Blind rivets up to 5 mm Ø all materials. BULB-TITE® blind rivets 4 mm, 5,2 mm and 6,3 mm Ø alu and steel High speed • High speed of operation through automatic resetting of the jaw mechanism immediately after each setting process With Li-Ion energy • Choice of 2.0 Ah and 4.0 Ah Li-Ion batteries

The PowerBird® Pro Gold Edition is even more powerful. Thanks to the brushless motor and the setting force of 20,000N, it is even able to set G-Bulb® and PolyGrip® blind rivets up to Ø 6.4 mm of all materials. In order to set particularly long rivets, the stroke has been increased by 25% to 25 mm. Even faster, almost no wear Because brushes that are susceptible to wear are no longer used, the motor of the PowerBird® Pro Gold Edition has an extremely long service life with almost no wear for the highest setting rate. The unparalleled ergonomics of the tried-and-tested TAURUS® series are now also available on the Power-Bird® Pro Gold Edition, guaranteeing fatigue-free work. Blind rivets from Ø 4.8 mm steel to Ø 6.4 mm of all materials, up to Ø 8 mm for aluminium. BULB-TITE® blind rivets up to Ø 7.7 mm, all materials. MEGA GRIP® blind rivets up to Ø 6.4 mm, all materials. More details on delivery limits will be answered in a specific enquiry (details are only exemplary)!

The Ronix 2701 Rotary Hammer Drill stands out as the ideal choice for individuals in need of a versatile tool. Equipped with a robust SDS plus bit holder and an 800W motor, it empowers you to drill, hammer drill, chisel, or release with utmost safety and precision across your entire work site.

The new portable HUNGER universal refacing machine UDM4E is a versatile machine offering a choice of modular components for refacing valves and valve seats as well as counterboring seat ring pockets and resurfacing the sealing surfaces on cylinder heads, cylinder liners and engine blocks of large diesel and gas engines. Key features: - No abrasive dust. A fast clean cut, - Compact and handy design - Modular add-on components provide a flexible solution for multiple projects - Powered by SELV (Safety Extra Low Voltage) to avoid risk of electrical shock - Power supply with universal AC input - Fast set-up time - Easy to use - The economical solution for both field and workshop use »Roundness, concentricity and surface finish of the refaced faces are within manufacturers’ specifications or even better«

The planishing hammer GL 2 is the perfect tool to give the best possible surface finish on sheet metal parts already preformed. Even fine laser seams can be quickly and easily smoothed with the GL 2 planishing hammer. The ECKOLD GL 2 comes into play wherever sheet metal needs to be formed by hand. The GL 2 is used in car body repairs, vintage car restoration, appliances production, furniture design and even the arts and crafts sector. The planishing hammer is also extremely suitable to correct warpage after edging. The ECKOLD GL 2 planishing hammer is supplied with special inserts for planishing, stretching and curving. ECKOLD now offers special plastic inserts for forming without damage to the surface, and inserts with flexible shafts for better access to corners and edges. This GL 2 planishing hammer KIT 1 with a handy wall bracket, consisting of: Planishing hammer GL 2 Planishing insert steel Stretching insert steel Curving insert steel Order now!

The MZD 45/30 (S-DF) is the ideal tool for the joining of sheets of different materials and thickness. These portable clinching pliers can be used for a wide range of applications, are light in weight and easy to operate. These pliers with integrated adjustable stroke limitation are used to join sheets that differ in material and/or thickness by setting single clinching elements. • Cost-saving, lightweight, handy with good component accessibility • Suspension mechanism (allows for 360° rotation of the pliers) • Integrated adjustable path limitation • Short cycle time • No energy consumption during downtime • Low-maintenance energy source This offer includes: Portable clinching pliers MZD 45/30 (S-DF) Pneumatic pressure intensifier, 3 m hose, suspension mechanism, tool holders S-DF Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task.

The MZD 45/30 (R-DF) is the ideal tool for the joining of sheets of different materials and thickness. These portable clinching pliers can be used for a wide range of applications, are light in weight and easy to operate. These pliers with integrated adjustable stroke limitation are used to join sheets that differ in material and/or thickness by setting single clinching elements. • Cost-saving, lightweight, handy with good component accessibility • Suspension mechanism (allows for 360° rotation of the pliers) • Integrated adjustable path limitation • Short cycle time • No energy consumption during downtime • Low-maintenance energy source This offer includes: Portable clinching pliers MZD 45/30 (R-DF) Pneumatic pressure intensifier, 3 m hose, suspension mechanism, tool holders R-DF Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task.

The planishing hammer GL 2 is the perfect tool to give the best possible surface finish on sheet metal parts already preformed. Even fine laser seams can be quickly and easily smoothed with the GL 2 planishing hammer. The ECKOLD GL 2 comes into play wherever sheet metal needs to be formed by hand. The GL 2 is used in car body repairs, vintage car restoration, appliances production, furniture design and even the arts and crafts sector. The planishing hammer is also extremely suitable to correct warpage after edging. The ECKOLD GL 2 planishing hammer is supplied with special inserts for planishing, stretching and curving. ECKOLD now offers special plastic inserts for forming without damage to the surface, and inserts with flexible shafts for better access to corners and edges. This GL 2 planishing hammer KIT 3 with carrier case, consisting of: Planishing hammer GL 2 Various planishing, stretching + curving inserts steel + synthetic Order now!

Carbideline consists of CarbideLine-S solid carbide tools, CarbideLine-H hybrid tools and multi-part carbide tooling with CarbideLine-I indexable carbide tools. All CarbideLine tools excel through maximum productivity in their specific fields of application. CarbideLine-H tools are a new addition to the product range. They cover the module range 5 to 12 and are the 1st. choice for rough machining and finishing large lot sizes, where the tools costs using solid carbide milling cutters are too high and the gear cutting quality is too low using indexable inserts. CarbideLine-H tools are also highly suitable for machining high-strength materials up to 1,400 N/mm2 and enable a gear quality up to quality grade AAA. Its preferred area of application is for gears for commercial vehicles, general mechanical engineering and energy technology. In one specific application it was possible to reduce the gearing costs per wheel by 20% with the CarbideLine-H compared with an indexable insert system.

Our company provides a full range of services for the development and implementation of automated process control systems for industrial enterprises. We are ready to help with the design, modernization, start-up and maintenance of various production lines or individual units of technological processes. 1423 engineering projects have been completed in close cooperation with the technologists and design teams of our clients. We automate existing production facilities, participate in the development and installation of facilities under construction, supply equipment and carry out commissioning, perform further technical and service maintenance. For today, our team is more than 150 people: engineers, managers, equipment installation and maintenance specialists. Be assured – we will carefully study your tasks and provide the best solutions.

The SMA 30-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 8 mm is possible in NE metals and a chamfer width of up to 6mm in steel. In addition to this, a radius processing of 1.2mm to 6mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The electrical design of the SMA 30 is equipped with a speed control and should be preferably used for stainless steel processing. The cutter heads are available for chamfer angles 30°, 45° and 60°. The processing of drill holes is already possible starting at a diameter of >28mm. For tight contours, long holes and bores, a single-cutting cutter head with a fitting guide roller is available, Ø10mm to Ø20mm depending on application.

The SMA 20-A series is available in an electrical or compressed-air operated design. The machine is designed for handling steel, aluminum, copper and plastics. A chamfer width of up to 7 mm is possible in NE metals and a chamfer width of up to 4mm in steel. In addition to this, a radius processing of 1.2mm and 2.5mm is feasible. The stunning and patented 8 or 16 cutting turning plate system guarantees long service life, best surface qualities and efficient working. The processing of drill holes is already possible starting at a diameter of >20mm.

The ASO 313 is for the chamfering and rounding off of workpieces with straight edges. The edge break with R2 - R4 is only possible by replacing the turning plate. A secure and simple handling is possible through the prismatic guide and additional handle. This helps us achieve a particularly clean and vibration-free chamfer quality. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer angle can be gradually set between 15 - 45°. Advantages: For 15 - 45° chamfers and for rounding edges Secure handling through prismatic guide and handle Reliable electric motor Insert milling cutter for efficient chamfering

The ASO 312 is for the chamfering and rounding off of workpieces with straight edges. The edge break with R2 - R4 is only possible by replacing the turning plate. A secure and simple handling is possible through the prismatic guide and additional handle. This helps us achieve a particularly clean and vibration-free chamfer quality. The compact construction and the low weight offer wonderful ergonomics. The machine is equipped with a powerful and reliable pneumatic drive. The chamfer angle can be gradually set between 15 - 45°.