Results for
Germany
• THERMO-AW valves are used for the reliable regulation of air, superheated steam and flue gas flows. The maximum permitted temperature may be, depending on design, up to 600°C. • In order to systematically avoid corrosion problems, we exclusively use stainless steel alloys to make our THERMO-AW valves. Our standard working materials are 1.4301, 1.4541 and 1.4571. • THERMO-AW valves are controlled manually, electrically or pneumatically. All brands can be used for the drive. • THERMO-AW valves are metallically sealed and function without any additional sealing materials. • The leakage rate is less than 0.1 % (based on the cross-section). THERMO-AW valevs are 100 % leak-proof against the surrounding area. • Our construction departement together with our in-house production allows us to deal with virtually any customer requests. • Due to systematic standardisation in detail and our long-term experience, THERMO-AW valves are not prone to malfun
Request for a quoteGermany
• THERMO-AW valves are used for the reliable regulation of air, superheated steam and flue gas flows. The maximum permitted temperature may be, depending on design, up to 600°C. • In order to systematically avoid corrosion problems, we exclusively use stainless steel alloys to make our THERMO-AW valves. Our standard working materials are 1.4301, 1.4541 and 1.4571. • THERMO-AW valves are controlled manually, electrically or pneumatically. All brands can be used for the drive. • THERMO-AW valves are metallically sealed and function without any additional sealing materials. • The leakage rate is less than 0.1 % (based on the cross-section). THERMO-AW valevs are 100 % leak-proof against the surrounding area. • Our construction departement together with our in-house production allows us to deal with virtually any customer requests. • Due to systematic standardisation in detail and our long-term experience, THERMO-AW valves are not prone to malfun
Request for a quoteGermany
• THERMO-AW valves are used for the reliable regulation of air, superheated steam and flue gas flows. The maximum permitted temperature may be, depending on design, up to 600°C. • In order to systematically avoid corrosion problems, we exclusively use stainless steel alloys to make our THERMO-AW valves. Our standard working materials are 1.4301, 1.4541 and 1.4571. • THERMO-AW valves are controlled manually, electrically or pneumatically. All brands can be used for the drive. • THERMO-AW valves are metallically sealed and function without any additional sealing materials. • The leakage rate is less than 0.1 % (based on the cross-section). THERMO-AW valevs are 100 % leak-proof against the surrounding area. • Our construction departement together with our in-house production allows us to deal with virtually any customer requests. • Due to systematic standardisation in detail and our long-term experience, THERMO-AW valves are not prone to malfu
Request for a quoteGermany
Standard turning valves combined in a T-joint • from Ø 100 mm to Ø 1000 mm • designed and produced according to customer specifications
Request for a quoteGermany
Standard turning valve • from Ø 100 mm to Ø 1200 mm • variable length • designed and produced according to customer specifications, the flanges as well
Request for a quoteGermany
• THERMO-DK are used for the reliable regulation of air, superheated steam and flue gas flows. The maximum permitted temperature may be, depending on design, up to 600°C. • In order to systematically avoid corrosion problems, we exclusively use stainless steal alloys to make our THERMO-DK valves. Our standard working materials are 1.4301, 1.4541 and 1.4571. • THERMO-DK valves are controlled manually, electrically or pneumatically. All brands can be used for the drive. • THERMO-DK valves are metallically sealed and function without any additional sealing materials. • The leakage rate is less than 1 % (based on the cross-section). THERMO-DK valves are 100 % leak-proof against the surrounding area. • Our construction departement together with our in-house production allows us to deal with virtually any customer requests. • Due to systematic standardisation in detail and our long-term experience, THERMO-DK valves are not prone to malfunctions.
Request for a quoteGermany
Sealing lubrication of sliding surfaces, e.g. ground-in parts such as taper plugs, dosing plungers, valves, beer taps etc. Maintenance lubrication of plastic and rubber parts, as well as stuffing boxes, lip seals and O-rings Rolling and friction bearing lubrication in slow-running areas, toothing or chains on filling and packaging machines, stirring and grinding mechanisms etc. Advantages and benefits Highly effective due to proven lubricant formula Fulfils most demanding hygienic requirements. Reduced maintenance and lubricant costs due to possible long-term lubrication Resistant to hot and cold water, water vapour, wateryalkaline and acidic disinfectants and cleaning agents Neither hard residues result, nor is there a tendency to soften or drip due to pasteurisation or sterilization Odour and taste-free, and does not affect the properties of beer foam Toxicologically harmless as defined in German LFGB
Request for a quoteGermany
Compact valve manifolds with low piping effort, reduced maintenance time and minimize investment costs. A connection system well known from the field of hydraulics and adapted to the respective application, allows for the intelligent combination of several valves in a customerspecific manifold. All necessary connections between the individual process valves are integrated in the manifold.
Request for a quoteGermany
The GEMÜ 1434 µPos is a digital electro-pneumatic positioner for the control of pneumatically operated process valves. The solid compact housing has a transparent cover. LEDs for status indication are integrated. Pneumatic and electrical connections are in one mounting direction to save space and enable easy access. —No air consumption when idle —Simple mounting to various valve actuators —Simple commissioning due to automatic initialisation —Speed-AP function for fast mounting and initialisation —Simple operation, no settings necessary
Request for a quoteGermany
The GEMÜ 1436 cPos is a digital electro-pneumatic positioner with optionally integrated process controller for the control of pneumatically operated process valves. When using the optional process controller the signals from a process sensor (e.g. flow, level, pressure, temperature) are detected and the media adjusted according to the specified set value. The positioner has a solid housing with protected operating buttons and a LC display. —Digital inputs (option) for variable function control for automation —Fieldbus interfaces e.g. Profibus DP, DeviceNet (option) —No air consumption when idle —Simple mounting to various valve actuators —Access rights via different user levels
Request for a quoteGermany
The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)
Request for a quoteGermany
The GEMÜ 549 2/2-way angle seat globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)
Request for a quoteGermany
Using highly advanced gas filling Small and Medium Enterprises technology is no longer a privilege for large enterprises. Over the last 15 years Filltech developed, in its own research center in the heart of Germany, different standard filling solutions. Through this experience, Filltech has now developed UniFill Complete; a standard gas filling solution for small and medium enterprises, using highly advanced technology. UniFill Complete is a ready-to-use, standardized CO 2 und N 2O gas filling station with a wide filling range for cylinders between 4 and 50 kg. Highlights Easy, precise and safe operation Entry-level, low-cost solution Automatic filling process with bypass valve Pumping set included Integrated pump control Legal for trade
Request for a quoteGermany
The UniFill CO 2 / N 2O is an ergonomic filling system for a wide range of cylinders with weights up to 50 kilograms. Highlights Fill connection with quick connector or fast hand wheel Easy, precise and safe to operate Calibratable Many IT communication capabilities Optional printer and / or scanner Optional vacuum prior to filling Integrable pump control Legal for trade Technical Data Filling-Range: approx. 4 – 50 kg/ 9 – 110 lbs. fill weight Weighing range: 0-150kg/ 0-330lbs Scale division: 0-60kg - 20g, 60-150kg -50g Cylinders: up to Ø 300 x 1800 mm/ 11.8 x 70.9 in. Dimensions: approx. 600 x 600 x 1400 mm/ 24 x 24 x 55 in. Weight: approx. 100 kg/ 220 lbs. Weight Scales and Controls Digital, freely programmable SysTec IT 8000 industrial weighing terminal 999 storable cylinder type (PLU) Automatic filling process, manually operated solenoid relief valve Monitoring of fill weight, integrated tare weight control Enhanced software, i.e. topfilling (only the fill parameter must be set,
Request for a quoteGermany
BSV Series DN 100 – 400 The Ball Segment Valve, BSV for short, is the result of a development of an innovative valve for pharmaceutical and fine chemical processes. For a wide range of solids applications, it is the preferred valve for process equipment like vacuum dryers, reactors or centrifuges as both as inlet and discharge valve. Even if products are not free flowing, have an abrasive effect or have moist and adhesive properties, the Ball Segment Valve is the right choice as a reliable, vacuum and pressure-tight process valve. The internal corner-free and edge-free housing does fullfill your cGMP requirements and leaves the ball segment sufficient space to move clear of the product flow path when opened. A reactor agitator or mixing tool can be designed to move within a few millimetres of the Ball Segment Valve virtually eliminating dead-space in the process area. Besides the standard flanges, the BSV can be equipped with tailored and non DIN flange connections to suit most...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Process valves - Import exportNumber of results
17 ProductsCountries
Company type