Rod steel - Import export

stainless steel*ground surface*threaded M 10*Ø 12 mm

stainless steel*ground surface*Ø 12 mm

1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm

Robust pendulum cup made of stainless steel V2A (1.4301) for industry and water treatment. The cup automatically swings into the horizontal position. This means that nothing can spill. The small diameter (Ø 130 mm) also makes it suitable for deep and narrow shafts. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sampling depths of up to 6 m can be achieved with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Pendulum cup made of stainless steel V2A (1.4301) with extra-long, closed handle. The sample cup has no openings or undercuts up to an immersion depth of approx. 500 mm. The closed design of the shaft makes the scoop cup particularly suitable for sampling well water, sludge, waste water, liquid manure or similar. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open bodies of water, etc. With the length-adjustable telescopic aluminium rods, sampling depths of up to 6 m can be achieved. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Sterilisable pendulum beaker made of stainless steel V2A (1.4301) for industry and water treatment. Beaker with scraping edge, capacity 1000 ml. Ideal for powders, granulates, pastes and slurries. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

steel*powdercoated*for rods up to 13 mm Ø

steel*powdercoated*for rods up to 13 mm Ø

The row of fingers is cast on a steel rod and then riveted with other rods on a belt of rubber.

Weight-optimized bell probe with steel rod and integrated filter technology. This probe is included in the complete set. Extremely light, yet very robust construction for fatigue-free work. The bell probe has a dust and a water filter integrated in the lower section and is used for unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground control or for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

Weight-optimized bell probe with steel rod and integrated filter technology. Extremely light, yet very robust construction for fatigue-free work. The bell probe has a dust and a water filter integrated in the lower section and is used for unpaved surfaces. When the carpet probe can no longer be used, the bell probe is used for above-ground control or for concentration measurement in the ppm range. Both probes are often carried along; the CFRP mini bell probe is ideal for this. All bell and borehole probes are available with a demountable rod to fit in the carrying case - complete set with borehole probe CFRP, bell probe CFRP and foldable carpet probe CFRP weight-optimized.

All parts coming into contact with the sample medium are made of pure white PTFE. Completely inert against all substances (with the exception of elementary fluoride). The rod is stabilised with a steel core which is completely encapsulated in PTFE. The 60 cm long rod can be extended to 120 cm by adding another component. The scoop PTFE with 10 ml has a strong rod with a length of 155 mm.

Trimmed for peak performance The construction industry is booming – and this has been the case for decades and all across the world. The need for new buildings, bridges and general infrastructure is constantly increasing. In terms of modern urban development, the demolition of buildings that are no longer up to date is part of everyday life. The stress on the tools used for this is easy to imagine. Demolition shears are used, for example, to cut angle iron or wire mesh, or to cut concrete ribs and steel rods. Our shearing knives or shear blades for mobile demolition shears are designed exactly for these massive stresses and have been used for many years on construction sites all over the world.

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

Flexible leveling feet Swiveling, leveling adjustable feet to compensate for uneven floors Swivel range : ± 4 ° to 20°. Adjustable foot plate: different shapes possible from diameter 20 mm to 120 mm Material: plastic PA (also ESD-capable possible) / zinc die-cast / stainless steel Color: black / bright, other colors on request Optionally with anti-slip plate: prevents adjustable feet from slipping on smooth industrial floors and can dampen vibrations Fastening to the floor with different versions: Optionally with screw holes in the plate Plate with extende base Base plate for safe subsequent mounting threaded rod: Material: steel / stainless steel Surface: galvanized / bright Alternative: ball head with internal thread Optionally with lock nut Translated with www.DeepL.com/Translator (free version)

With the new EMX model range of electric steam boilers, CERTUSS offers you twice the steam output as before with a significantly smaller footprint. Electric steam generators from CERTUSS are heated by stainless steel heating rods with a large heating surface. The output of the heating elements is regulated continuously via semiconductor contactors. One energy-efficient advantage is the immediate modulating output adjustment to the actual steam demand during the operating cycle. For greater steam demand of up to 640 kg/h or fluctuating steam loads, several ELECTRO steam generators can be cascaded in series. Multiple systems like this are an especially economical solution. Our compact electric steam systems feature built-in feed water tanks and feed water pumps. They require very little space and have a short heat-up time. Steam systems are also available as a unit with water conditioning equipment installed at the factory.

The electrical steam generators E 100 M – 120 M from CERTUSS offer you impressive output in two output capacities of 100 - 120 kW heat output. They are compact, economical and have a high output. All electrical versions do not require a permit for installation and use in Germany. Heating: Electrical heating rods Steam output 135 – 160 kg/h The sizes: E 100 and E 120 - In two output capacities of 100 - 120 kW heat output. - Fully electronic pressure and output control. - Compact stainless steel heating rod with low heating surface load, placed laterally on the pressure body for easy access. - Constant network load without consumption peaks. - Integrated multifunction display. - Multilanguage plain text indication.

Telescopic Spindle Extension T3 with screw bell. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329, square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C or E. Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150 N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and screw bell. Completely dirt-proof and water-repellent.

Telescopic Spindle Extension T3 - waterproof. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329, square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150 N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and flange bell (F10). Completely dirt-proof and water-repellent.

Telescopic Spindle Extension T3 for ball valves with polygon. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304) with connection drillings accord. to GW336. Suitable for operating key DIN 3223 C or E (DN25-50). Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal round bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.

Telescopic Spindle Extension T3 for ball valves with square connection. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304) with connection drillings accord. to GW336. Suitable for operating key DIN 3223 C or E (DN25-50). Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal round bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.

Telescopic Spindle Extension T2 for gate valves. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques according to GW336. Two-piece PE protection tube system with a bonded centring cap, universal bell and sealing. Completely dirt-proof and waterrepellent. Optional: Marking disc (double sided gas and water) as well as bell adapters/sealing inserts.

Telescopic Spindle Extension T3 with position indicator. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329, square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.

Telescopic spindle extension GW336 with standardised intersection accord. to worksheet DVGW336-1 (A), Edition September 2010. DVGW tested accord. to technical examination basis DVGW 336-2 (P). Two-piece hot-dip galvanised steel rod accord. to DIN 10240 (alternatively in stainless steel), without coupling (bottom adapter), with connection drilling, square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336-2 (P). Three-piece PE protection tube system with a bonded centring cap and bell accord. to GW336-1 (A). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) accord. to DIN 3223 E made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Suitable for operating key DIN 3223 C. Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150n. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques according to GW336. Three-piece PE protection tube system with a bonded centring cap, universal bell and sealing. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

Telescopic spindle extension GW336 with standardised intersection accord. to worksheet DVGW336-1 (A), Edition September 2010. DVGW tested accord. to technical examination basis DVGW 336-2 (P). Two-piece hot-dip galvanised steel rod accord. to DIN 10240 (alternatively in stainless steel), without coupling (bottom adapter), with connection drilling, square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336-2 (P). Three-piece PE protection tube system with a bonded centring cap and bell accord. to GW336-1 (A). Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 500Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter

Spindle extension consisting of a two-piece, hot-dip galvanised steel rod and a separate, adjustable PE protection tube. Rod continuously adjustable with Auszugsicherung and self-supporting in each statement positions. Locking of the set minimum length by a v2a-collar with VA-threaded pin M10. Operating square forged, 12/14 mm, suitable for operating key DIN 3223 E (House connection fittings). Connecting pins in stainless steel v2a. Coupling sleeve made of iron GGG40, galvanised, with slot and VA-Clip-pin (tool-free connection system). PE-HÜLSROHR with centering cap and universal-level bell, dirt-proof and water-repellent.

Telescopic spindle extension consisting of a two-piece, hot-dip galvanized steel rod and a verstifteten PE protection tube. steplessly adjustable with Auszugsicherung and self-supporting in each statement positions. Operating square forged, 12/14 mm, suitable for operating key DIN 3223 E (House connection fittings). Dome sleeve made of iron GGG40, galvanised. Connecting pins in stainless steel v2a. Coupling sleeve with slot and VA-Clip-pin (tool-free connection system). PE-HÜLSROHR with centering cap and universal-level bell, dirt-proof and water-repellent. Optional: Marking disc, usable on both sides, e.g. for gas or water.