Tool cases - Import export

• Containing quality tools, partially insulated and tested according to DIN EN/IEC 60900 • Hard-shell cases made of high-strength, sturdy ABS plastic with hardened and torsion resistant aluminium frame

• Containing quality tools, partially insulated and tested according to DIN EN/IEC 60900 • Sortimo L-BOXX, plastic system case made of shock and impact proof ABS-plastic for more mobility • Seamless integration of the L-BOXX into the Sortimo Globelyst M system • Inset boxes for a variety of classification systems and divisions

Plastic cases in sturdy double-wall design. Ideal for high quality tools and special parts Interior design options include convoluted or plain foam, or die-cut foam inserts, according to customer specification Double-wall design offers optimum protection for the content

Short description: Top quality nozzle for everyday use The torpedo nozzle is the ideal tool in all cases where high demands are placed on cleaning and pulling properties. Due to the patented fluid mechanics (patent no.: DE 19533654) and the highly wear-resistant material used it sets new standards on cost reduction and increase in efficiency. The torpedo nozzle that belongs to the most efficient sewer cleaning tools was designed for cleaning lines up to 400 mm in diameter. Two different jet angles contribute to an effective transport of dirt and silt. The torpedo nozzle can cope with difficult tasks in round as well as in egg-shaped pipes.

Working range Blind rivets up to 7.7 mm Ø all materials Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/26 BT, 16/32 BT, 16/42 BT and 16/48 BT Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts): HN 2 BT

Working range Blind rivets from 3.0 to 6.4 mm Ø all materials, except PolyGrip® blind rivets with 6.4 mm Ø made of stainless steel and G-Bulb® blind rivets Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/29, 16/32, 16/36, 16/40 and 16/45 Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts)

The µCAN.4.sg-F1 is the universal measurement module for the acquisition of analogue standard signals. The module is equipped to measure strain gauge full brigde signals in four-wire technology at an adjustable sample rate of up to 1 kHz per input (4 kHz overall sample rate). The bridge is excited directly from the module with a ratiometric measurement.4-wire technology Strain gauge full bridge, R > 350 Ohm Strain gauge excitation 4.096V / ratiometric Sample rate max. 1 kHz per input CAN 2.0A and CAN 2.0B / RawCAN free software configuration tool IP65-rated aluminium casing bi-colour LED for error indication Operating temperature -40°C to +85°C Fieldbus CAN Protocol Raw CAN

Are you a DIYer or a construction professional looking for the best spirit level for your work? You've come to the right place! Buying a good spirit level is essential to the success of your work, whether it's to put up a simple shelf or to lay a covering. There are many types of spirit levels available, with prices ranging from a dozen euros to a hundred euros. Here, at Ronix Tools, we help you to choose the best spirit level for your project. The Ronix brand is one of the leading brands in the field of measuring and leveling tools. In this case, Ronix spirit levels are available in different lengths. Among the sturdy spirit levels is the Ronix RH-9412 with its high accuracy of 0.5 mm/m in the normal position and its shock-absorbing side stops to prevent damage to the tool if dropped. It should also be noted that being made of aluminum, this device is very robust, easy to use, and readable at all times and from all angles thanks to its bubbles.

Tube squaring machines are necessary to achieve burr-free and right-angled seam preparation for orbital welding. That‘s why Orbitec offers two machines, from the small handy Planfix 40 S to the large Planfix 115 S. The Planfix 40 S is a powerful and handy squaring device for mobile or stationary use with battery or mains drive. It has a large viewing window, a tool carrier for mounting the inserts, double-sided indexable inserts, and a feed with 0.1mm scale graduation. Alternatively, existing Orbitec facing tool bits can be used without tool carriers. The new inserts have a long service life and can process unalloyed, low-alloy and high-alloy steel quickly and reliably with high precision. Package includes exemplary for Planfix 40 S battery pack 230 V: — Tube clamping attachment — Drive — 2 Li-ion batteries — Battery charger — Tool set — Carrying case

UNSCHLAGBARE MERKMALE Wasserdicht, bruchfest und staubdicht Leicht zu öffnender zweistufiger Verschluss Offenzelliger Kern mit widerstandsfähiger Wandkonstruktion Robust, leichtgewichtig O-Ring-Dichtung Automatisches Druckausgleichsventil Ergonomischer Griff mit Gummiummantelung Edelstahlbeschläge Vorhängeschlossschutz aus Edelstahl MAßE: 424 x 332 x 111 mm Bedingungslose Qualitätsgarantie Innenliegender Schaumstoff schützt das Werkzeug und ist in seiner Form für den jeweiligen Schneid- bzw. Presskopf zugeschnitten

UNSCHLAGBARE MERKMALE Wasserdicht, bruchfest und staubdicht Leicht zu öffnender zweistufiger Verschluss Offenzelliger Kern mit widerstandsfähiger Wandkonstruktion Robust, leichtgewichtig O-Ring-Dichtung Automatisches Druckausgleichsventil Ergonomischer Griff mit Gummiummantelung Edelstahlbeschläge Vorhängeschlossschutz aus Edelstahl MAßE: 424 x 332 x 111 mm Bedingungslose Qualitätsgarantie Innenliegender Schaumstoff schützt das Werkzeug und ist in seiner Form für den jeweiligen Schneid- bzw. Presskopf zugeschnitten

UNSCHLAGBARE MERKMALE Wasserdicht, bruchfest und staubdicht Leicht zu öffnender zweistufiger Verschluss Offenzelliger Kern mit widerstandsfähiger Wandkonstruktion Robust, leichtgewichtig O-Ring-Dichtung Automatisches Druckausgleichsventil Ergonomischer Griff mit Gummiummantelung Edelstahlbeschläge Vorhängeschlossschutz aus Edelstahl MAßE: 424 x 332 x 111 mm Bedingungslose Qualitätsgarantie Innenliegender Schaumstoff schützt das Werkzeug und ist in seiner Form für den jeweiligen Schneid- bzw. Presskopf zugeschnitten

UNSCHLAGBARE MERKMALE Wasserdicht, bruchfest und staubdicht Leicht zu öffnender zweistufiger Verschluss Offenzelliger Kern mit widerstandsfähiger Wandkonstruktion Robust, leichtgewichtig O-Ring-Dichtung Automatisches Druckausgleichsventil Ergonomischer Griff mit Gummiummantelung Edelstahlbeschläge Vorhängeschlossschutz aus Edelstahl MAßE: 424 x 332 x 111 mm Bedingungslose Qualitätsgarantie Innenliegender Schaumstoff schützt das Werkzeug und ist in seiner Form für den jeweiligen Schneid- bzw. Presskopf zugeschnitten

UNSCHLAGBARE MERKMALE aluminum profile cases black 2 castles 3 handles 2 Deckenhalter protective corners interior dimensions: 690 x 480 x 400 mm Inkl. Platz für 6 Satz Presseinsätze + 1 Satz im Werkzeug

Tool case for ipr-Safety Cutting Unit Internal foam protects the tool and is tailored in shape for the particular cutting head Waterproof, unbreakable, dustproof Easy opened two-stage closure Open-cell core with resistant wall construction – robust, lightweight O-ring gasket Diemension: 750 x 450 x 286 mm

Plastic case with foam insert for the connection set street lighting. Blank case without tools !

Safety cutting unit consisting of: Hydraulic power unit cube Integrated pressure gauge up to 1000 bar 10m High pressure hydraulic hose (metal free ), firmy connected to the cutting head Superlight cutting head ipr50HS Remote Control 3m Power charger 3m User manual Tool case The total weight of our 95 securty system weights about 17 KG and not 30 KG!

Basically the TOOLMASTER versions vary by their tool design, their size of useable surface and the degree of automation. All versions are suitable for high temperatures and optionally equipped with fire protection engineering, which quickly separates the tool in case of energy drop or timeout. KLN also manufactures special machines adapted to your individual requirements. TOOLMASTER "Basic" as well as type HE 50/30 are standard machines. The versions "Advance", "Semi-Automatic" and "Automatic" are made with tools in sandwich design. This makes possible the handling of upper tool, hot plate element and lower tool as a compact unit. They are designed particularly for quick and frequent production changes. The HE/SA has a horizontal concept with servo-drive technology for quick and precise movements. The TOOLMASTER CC has been developed for applications with two welding tasks in one cycle. Almost all machine versions can be provided with pneumatic or servo-motor drives.

Material: sheet steel with silicon coating Proficoat 100 Tins: deep-drawn Sets: with adjacented frame Scallop-edged Cake Tins: "Dom-Cake" "Strong" Scallop-edged Cake Tin Set half round Other special individual tin sizes and frame versions can also be produced for larger order quantities, and provided in case the relevant tooling is available.