Bolts - Import export

Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides

Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

We supply tailored, special parts manufactured with our state-of-the-art cold-moulding and extrusion equipment. We can press cold-moulded articles – whether solid, semi-hollow or hollow – according to your drawings. Complex moulded parts and individual, special projects are our strengths. Our cold-moulding competence covers flanged bolts, studded parts, stepped bores and parts with an internal or external thread. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

Ground anchors, ground screws or screw anchors are used in various applications, such as: Stable earth screw foundation: Perfect solution for garden sheds, gazebos, greenhouses, patios and carports, for permanent or temporary applications (reusable, as long as not damaged), can be loaded immediately even in winter Bracing of poles: Ground anchors are used to securely anchor masts to the ground and to absorb tensile forces. This is particularly important in situations where where high stability and safety are required, for example installation of antenna masts or for temporary constructions constructions such as event stages. Recovery of vehicles: Ground anchors can be used as anchor points to secure vehicles during recovery or rescue operations. rescue operations. They provide a reliable anchorage in the ground to absorb tractive forces and allow safe towing or towing or moving vehicles off-road.

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and duplicate acceptances (eg works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Threaded bolts DIN 976-1, type A M3 to M6 x 96 mm Double threaded bolts wth a rolled-on unilateral or bilateral thread M2.6 to M10 mm Length of up to 1.000 mm Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

In our range we have a variety of different rubberised floor plates which can be used for earthmoving machines with a total weight of up to 25 tonnes. The rubberised floor pads (ChainOn) can be mounted directly on the carrier chain. You will also find bolton pads (BoltOn) and clipon pads (ClipOn), which only need to be fixed to the steel floor plates. We also have vulcanised rubber and polyurethane floor pads in our range. Pads for standard applications up to 25 tonnes are also part of the portfolio. In addition, we have rubberised floor plates as well as attachments for all types of asphalt machines from Caterpillar, Vogele, Wirtgen, Dynapac, Marini, Abg, Bitelli and many other brands in our range.

Suspension Bolt FSKB Connection: Stroke: M12x1 ... M20x1,5 25 ... 75 - mounted on hollow profiles - sets down gently on workpieces - even load distribution

Suspension Bolt FSBB Connection: Stroke: M16x1,5 ... M30x1,5 25 ... 100 - mounted on holder or drillings - sets down gently on workpieces - even load distribution

Suspension Bolt FSBE Connection: Stroke: M16x1,5 ... M30x1,5 25 ... 100 - mounted on holder or drillings - sets down gently on workpieces

Suspension Bolt FSBB-DG Connection: Stroke: M8x1 ... M20x1,5 25 ... 75 - turn-proof aluminum design - mounted on holder or drillings - sets down gently on workpieces

Suspension Bolt FSBE-DG Connection: Stroke: M8x1 ... M20x1,5 25 ... 75 - turn-proof aluminum design - mounted on holder or drillings - sets down gently on workpieces

Suspension Bolt FSBI-DG Connection: Stroke: M8x1 ... M20x1,5 25 ... 50 - turn-proof aluminum design - mounted on holder or drillings - sets down gently on workpieces

T-Heads bolts