Hand pumps - Import export

This high-pressure pump generates pressures of up to 700 bar with ease, with fine control for precise adjustment. It is perfect for testing manometers and pressure transmitters. The pump must be filled with 100 cm3 of hydraulic oil or water and can therefore fill up even relatively large dead volumes. An additional manometer (not supplied) is needed for reference measurement of the configured pressure. KELLER recommends manometers in the LEX1 series with a suitable pressure range.

This pneumatic hand pump can generate negative pressure/vacuum and pressures of up to 25 bar. Thanks to the integrated fine adjustment valve, any calibration pressure can be configured precisely and rapidly, making the pump ideally suited to testing measuring equipment. An additional manometer (not supplied) is needed for reference measurement of the configured pressure. KELLER recommends manometers in the LEX1 series with a suitable pressure range.

Hand pump with FKM or EPDM seals and 1 L reservoir making the product suitable for most solvents Excellent resistance to chemicals, ideal to use for a brake cleaner Pump cylinder in reinforced polyamide 200.100.020 | FKM/polyamide | red - black  200.100.040 | EPDM | white - black

The Nova Swiss hand pump with spindle drive is particularly well-suited to use as a pressure generator for smaller high-pressure systems. It is ideal for all applications in which common high-pressure media are used, including those with low viscosity. This pump can be used anywhere and is not dependent on a compressed air or power supply. The finely threaded spindle allows precise adjustment to the desired pressure. Operation is facilitated by three long crank arms. The stem does not rotate, thus significantly extending the longevity of the packing

Inlet tray lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads . Supporting legs 50 ton capacity Side safety rails height 1.20m, removable Anti-slip surface in hot galvanized grating 2 lashing chains included dock with rolls bumpers

Inlet tray lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads . Supporting legs 50 ton capacity Side safety rails height 1.20m, removable Anti-slip surface in hot galvanized grating 2 lashing chains included dock with rolls bumpers

Inlet tray lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads . Supporting legs 50 ton capacity Side safety rails height 1.20m, removable Anti-slip surface in hot galvanized grating 2 lashing chains included dock with rolls bumpers

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Dock Bumpers with Refuge zone of 500 mm Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 21 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Mobile loading ramp with hydraulic tilting bridge Brand: AZ RAMP - Type: STAR- 20 T Load capacity: 20 000 Kg Dimensions: Total length deployed: 10.55 m Overall Width: 2.07 m - Useful Width (Inside): 1.96 m Length Inclined plane / Inclined part: 7.15 m Length Flat-shaped horizontal: 3.31 m Input tray length: 2.10 m - Output lip length: 0.74 m Empty weight: 3 015 kg Adjustable lifting height: Mini: 1.00 m - Max: 1.60 m Slope: Min: 16.5% - Max: 22.37% The + Product: Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 35 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Mobile loading ramp with hydraulic tilting bridge Brand: AZ RAMP - Type: STAR- 15 T Load capacity: 15 000 Kg Dimensions: Total length deployed: 10.55 m Overall Width: 2.07 m - Useful Width (Inside): 1.96 m Length Inclined plane / Inclined part: 7.15 m Length Flat-shaped horizontal: 3.31 m Input tray length: 2.10 m - Output lip length: 0.74 m Empty weight: 3 015 kg Adjustable lifting height: Mini: 1.00 m - Max: 1.60 m Slope: Min: 16.5% - Max: 22.37% The + Product: Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 35 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Mobile loading ramp with hydraulic tilting bridge Brand: AZ RAMP - Type: STAR- 12 T Load capacity: 12 000 Kg Dimensions: Total length deployed: 10.55 m Overall Width: 2.07 m - Useful Width (Inside): 1.96 m Length Inclined plane / Inclined part: 7.15 m Length Flat-shaped horizontal: 3.31 m Input tray length: 2.10 m - Output lip length: 0.74 m Empty weight: 2,815 kg Adjustable lifting height: Mini: 1.00 m - Max: 1.60 m Slope: Min: 16.5% - Max: 22.37% The + Product: Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 35 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Mobile loading ramp with hydraulic tilting bridge Brand: AZ RAMP - Type: STAR- 10 T Load capacity: 10 000 Kg Dimensions: Total length deployed: 10.55 m Overall Width: 2.07 m - Useful Width (Inside): 1.96 m Length Inclined plane / Inclined part: 7.15 m Length Flat-shaped horizontal: 3.31 m Input tray length: 2.10 m - Output lip length: 0.74 m Empty weight: 2,810 kg Adjustable lifting height: Mini: 1.00 m - Max: 1.60 m Slope: Min: 16.5% - Max: 22.37% The + Product: Inlet tray and outlet lips hydraulically folded by hand pump. Descent and mounted wheels via hydraulic crank. Designed for use with 3 and 4 wheel forklift. 4 Support feet with adaptive heads Side safety rails height 35 cm, removable Anti-slip surface in hot galvanized grating 2 lashing chains included

Enriched with probiotics, aloe vera and chamomile. Gentle formula with rich foam maintains external intimate hygiene. Cleansing and refreshing fights unpleasant and unnatural odours. Its pH level is suitable for natural vaginal acidic pH. Suitable for daily use. Pump into your hand and apply the foam externally to intimate areas. Wash off with water. Active Content Probiotic Active Chamomile Extract Aloe Vera Extract

- Sampling must be done quickly and safely according to the prescribed procedure at proper location on site. - The sampling method can be classified into two categories. - Oil extraction into the sample bottle by integrated vacuum pump driven by electric motor - Convenient and easy sampling compared to manual type - Robust. One-handed grip - Adopted clamping spec for clean vacuum standard sample bottles - One-touch operating switch

OTAL® hand pumps with PP delivery tubes, resistant to weak acids, alkalis and detergents. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers.

OTAL pump with disposable delivery tube made of PE, for single use. In OTAL pumps the medium being transferred comes in contact only with delivery tube. There is a danger with reusable pumps that the liquid being transferred will be contaminated by the pump, especially if the pump is used for different media or containers and it´s not properly cleaned before change. A space-saving container pump is specially designed for single use, thereby completely eliminating time-consuming and cost-intensive cleaning as well as contamination. The delivery tube of the liquid transfer pump is made of a single piece and can easily be shortened to the respective container height using the cutter included with delivery. This offers maximum flexibility and guarantees good emptying of small remaining amounts from the container. The discharge of the delivery tube can also be shortened. The disposable pump is ideal when special purity is important or if cleaning is difficult or not possible at all.

The solvent pump for tinplate canisters with pull-out spout puts an end to the risky decanting of dangerous substances into another container. The included thread adapter fits to the standard pull-out spouts - immediate safety! Hand-operated solvent pump for contaminationfree removal of organic solvents and flavouring agents. The hand pump works according to the overpressure principle. An excess pressure is built up in the tank with the pump ball, forcing the liquid out of the container. Pouring flammable liquids All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so that no electrostatic charge forms. Gastight version The pump can be completely closed off with the two ball valves so that no dangerous vapours can escape after dispensing. .

OTAL® foot pumps with delivery tubes made of PP, resistant to weak acids, alkalis and detergents. The telescopic immersion tube adapts itself to the container height on insertion of the foot pump. This ensures good removal of residual liquid and means that the foot pump can be used with different containers.

Mini solvent pump | reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly effective Mini solvent pump | reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly effective The hand pump works according to the excess pressure principle. An excess pressure is built up in the container with the pump ball, forcing the liquid outward. In this way only the hose, pumping tube and discharge come in contact with the liquid being filled. To ensure safety, a pressure relief valve protects the solvent pump against excessive pressure build-up, for example due to sunshine.

Pump-it® canister pumps are designed for quickly and cleanly emptying canisters and small barrels up to 60 l. The hand pump is used to create excess pressure that forces the liquid out of the canister. Pump-it® is suitable for weak acids, alkalis and petrochemicals.

Pressureless spray bottle made of LDPE with long-life hand pump. The functioning of each individual sprayer is tested during manufacture. Areas of application: Industry, laboratories, production, leisure, household. Suitable for agricultural pesticides and detergents.

PumpMaster, canister and barrel pump for petrochemical liquids. The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.