Industrial resins - Import export

Paraformaldehyde, also known as Formaldehyde Resin, is an industrial chemical. It is used in industries such as manufacturing, agriculture, and medicine. It is obtained as a by-product of Formaldehyde polymerization. When the chemical is depolymerized, it gives back formaldehyde. The chemical formula of Paraformaldehyde is C2H6O2.

AREAS OF USAGE: 1-CHEMICAL INDUSTRY: For transfer acids, alkalis, solvents, alcohols 2-REFINING INDUSTRY: For using as dosage, circulation pump, filter press pump 3-TEXTILE INDUSTRY: Transferring textile chemicals 4-PACKAGING INDUSTRY: Transferring for glues, resins, paints, varnishes, compounds ADVANTAGES: 1-Corrosion-resistant 2-Pumps can use for transferring fluids which contains particles 3-Maintenance is easy and costs are low 4-Flow rate can adjust with change inlet air pressure. 5-Pumps can work without fluids. 6-Suction depth is 1,5 meter.

Especially by our research and development work we have succeeded in creating various permanent anti-sticking coating systems. The distinctive deep-drawing properties paired with thermal resistance allow it to be used in a wide range of applications. From façade coating and device covers in industrial engineering to household products, such as sliding surfaces for shavers. There are hardly any limits for our application possibilities.

We find decorative coatings wherever an attractive or optically effective surface is required. Examples include the construction sector (interior and exterior), office organisation, interior decoration, reflectors, veterinary medicine, labels, roof construction and other niche segments.

ALWA MOULD P is a cold curing casting resin for the production of porous moulds, slabs and blocks for the ceramic industry. It is a porous and high-strength plastic, which is well-suited for high pressure casting applications. ALWA MOULD P can be used in various areas of the tableware and sanitary ceramics, technical ceramics, plastic mould procedure as well as various filtration processes. The high stability and defined porosity of the material allows highly accurate mould surface reproductions. With ALWA MOULD P various geometric moulds for filtration processes of suspensions can be produced. ALWA MOULD P can be used for ceramic slip pressure casting procedures. In this procedure, water is removed by a filtration process of a clay suspension (slip), so that an increasing clay layer is built on the mould wall over time. The moulds, slabs and blocks of ALWA MOULD P are easily machinable (e.g., drilling, milling).

The B70H is a modification of our B70V and is designed for horizontal use on a transport trolley. It can be used in situations where the B70V comes up against spatial or handling limits and thus rounds off our Eccentric screw pumps with a mobile variant. The pump is suitable for pumping aqueous to highly viscous Newtonian and non- Newtonian media as well as media containing solids and shear-sensitive media. It is also used in explosion-proof zones for aggressive and highly flammable liquids with high delivery pressure. * also available in explosion-proof design on request * Horizontal version * with stainless steel transport trolley Features & Advantages * Conveying possible at low room height * No physical strain due to heavy lifting * Mobility is given by the transport trolley * Simple size change possible * Easy handling of pumps with large weights

Gronbach manufactures decorative elements for the automotive industry in interior and exterior areas such as trim strips or trim parts made of aluminium, stainless steel and plastic hybrid technology. Functional components and plastic injection molded parts with a focus on fan wheels and turbines are also essential components of our technologies. As a specialist for surface finishing, you have a wide range of colours (anodising, powder coating), noble shapes and surfaces (brushing, grinding, polishing, blasting) and high-quality individualisation (screen printing, pad printing, under-anodising printing, laser engraving, etching techniques) at your disposal. In addition to the production of individual parts and the manufacture of complex assemblies as well as end products, we also offer you as a system supplier the complete project planning for new developments. Our portfolio includes: Automotive door sills Interior visible parts, e.g. side applications, decorative panels and...

90SMX(N) crystals are miniature surface-mount crystals specifically designed to provide a low-cost and reliable source of real time clock 32.768kHz frequency fro mass-marlet applications. The crystals are low-profile and encapsulated in epoxy resin. Frequency 32.768kHz Industry-standard package Compact and low-profile Supplied on EIA tape and reel

Formaldehyde is a colorless, strong-smelling, flammable organic chemical with chemical formula CH2O it is produced industrially and used in building materials such as particleboard, plywood, and other pressed-wood products also it is used as a fungicide, germicide, and disinfectant, and as a preservative in mortuaries and medical laboratories It is produced naturally during the decay of plant material in the soil and during normal chemical processes in most living organisms, it is also a combustion product found in tobacco smoke. Industries: Household chemicals, fertilizers, adhesives, oils, greases, horticulture, feed industry, plastic industry, resins and textile industry Properties: CAS number 50-00-0 (36-50%) WE number 200-001-8 (36-50%) Index number 605-001-00-5 (35-50%) Chemical formula CH2O Customs tariff code 29121100 ADR UN2209 pH 3-4 Melting / freezing point ~100°C Boiling point / range 64–85°C Relative density 1,090–1,150 g/cm3 @20°C

Glycerine is a colorless, odorless, clear, viscous liquid that is sweet-tasting and non-toxic it is a natural compound derived from vegetable oils or animal fats Chemical name is Glycerol with chemical formula C3H5(OH)3 Industries: Paints and varnishes, Household chemicals, Fertilizers, Cosmetic industry, Adhesives, oils, greases, Horticulture, Pharmaceutical industry, Food industry, Feed industry, Resins, plastics, polyurethanes Uses: Humectant, solvent, and sweetener, and may help preserve foods Filler in commercially prepared low-fat foods Thickening agent in beverages Medical and personal care Botanical extracts Electronic cigarette liquid Antifreeze Chemical intermediate Vibration damping Properties: CAS number 56-81-5 WE number 200-289-5 Chemical formula C3H8O3 Molar mass 92,1 g/mol Customs tariff code 29054500 pH 5-7 Melting / freezing point -10°C Boiling point range 100-130°C Relative density ~1200 kg/m3 @15°C

Acetone is a colorless liquid, it is also known as propanone, with chemical formula (CH3)2CO, highly volatile and flammable liquid with a characteristic pungent odor Acetone is a solvent that mixes well with water and evaporates quickly, making it well-suited for many household and manufacturing uses, include nail polish remover, automotive or furniture lacquer, de-gummer or degreaser for textile products, and it can even be used in plastic production It is also safe for use as an indirect food additive in adhesives and food-contact coatings Industries: Paints and varnishes, Household chemicals, Cosmetic industry, Adhesives, oils, greases, Pharmaceutical industry, Resins, plastics, polyurethanes, also it is an important chemical solvent Properties: CAS number 67-64-1 WE number 200-662-2 Chemical formula CH3COCH3 ADR UN1090 Melting / freezing point -94,7˚C Boiling point range 56,05˚C– 56,5˚C Relative density 790 kg/m3 @20ºC

Talc is a naturally occurring mineral, mined from the earth, composed of magnesium, silicon, oxygen, and hydrogen. Chemically, talc is a hydrous magnesium silicate with a chemical formula of Mg3Si4O10(OH)2 Talc has many uses in cosmetics and other personal care products, it may be used to absorb moisture, to prevent caking, to make facial makeup opaque, or to improve the feel of a product Industries: Paints and varnishes, Household chemicals, Cosmetic industry, Adhesives, oils, greases, Pharmaceutical industry, Building chemistry, Resins, plastics, polyurethanes Talc is used in many industries, including paper making, plastic, paint and coatings, rubber, food, electric cable, pharmaceuticals, cosmetics, and ceramics Properties: CAS number 14807-96-6 WE number 238-877-9 Chemical formula 3Mg2∙4SiO2∙H2O Molar mass 379,34 g/mol Customs tariff code 25262000

Potassium hydroxide is an inorganic compound commonly called caustic potash Along with sodium hydroxide (NaOH), KOH is a prototypical strong base, It has many industrial and niche applications, most of which utilize its caustic nature and its reactivity toward acids Industries: Household chemicals, Fertilizers, Cosmetic industry, Adhesives, oils, greases, Resins, plastics, polyurethanes Catalyst for hydrothermal gasification process Precursor to other potassium compounds Manufacture of soft soaps As an electrolyte Niche applications Properties: CAS number 1310-58-3 WE number 215-181-3 Chemical formula KOH Molar mass 55,11 g/mol Customs tariff code 28152000 ADR UN1814 Melting / freezing point 360°C (100% KOH) Relative density 2,044 @20°C (100% KOH)

Reactor, storage tanks, silos, reactors, blenders, mixers, mixer blades, turnkey resins and chemical plants, filters, heat exchangers, boilers, basketmill, basket mills, paint finishes, polyester plants, bio diesel plants, thin film evaporator, alkyd plant , Pva plant, styrene acrylic plant, mixer blades, storage tanks, plasticizers plant (DOP, DOTP, DOA, DINP, DIDP, TOTM), urea formaldehyde plant, autoclave, bunker, boiler washing machine,water solvent based paint factory,Pilot production plant, pilot reactor, pilot blender, pilot mixer mixer, pilot exchanger, pilot PVA, pilot alkyd plant, pilot plastic plant, pilot polyester plant, pilot bio diesel plant, pilot urea formaldehyde plant, pilot DOP, pilot DOTP, pilot DOA, pilot DIDP, pilot TOTM facility,universal pilot production plant,rashing Ring,Scrubber,Solvent based thermoset acrylic resin plant,Pipe heat exchanger,Chemical reactors,Reactor manufacturers,Companies manufacturing reactors,paste press machine turbo mixer,hot melt glue

For professionals, this 3 axis CNC milling equipment range offers an excellent price ratio/performances, in many industrial sectors. Refer to the exemples of applications : PVC signboard Moulds and models Health case or box Cases and boxes Plastics machining Electric vehicles parts Parts for subways Parts for trams Bus parts Balloons 3 axes Milling equipment : Precision milling/cutting machine (router) with simple use for machining plate materials in the sectors of advertising, sign, sign board, POP, plastics, aluminium transformation….. Some of the materials to be used (according to the selected spindle and tool) on : - Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..) - Expanded plastic and alveolar plates - Rigid foams (PU- PS-…) - Semi rigid foams (KAPA line®,…) - Composite materials for building : Alucobond®, Dibond®, Reynobond®,.. - Composite materials for industry (polyester resin loaded with glass fiber, carbone fiber...) - Wood and by-products. - Polyester resins. - Light...

Optimized for machining aluminium, plastic materials in strong thickness and composite materials with high mechanical characteristics. Refer to the exemples of applications : Moulds and models Cases and boxes Plastics machining Electric vehicles parts Parts for subways Parts for trams Bus parts Trolleys Side windows Aircraft interior furnishing HIGH PRODUCTIVITY 3 axes milling equipment : Precision milling machine of simple use for machining rigid plate materials in strong thickness in the sectors of plastic, modeling, aeronautics, aluminium transformation advertising and POS or for machining 3D molds and models. Materials to be used (according to the selected spindle and tool): - Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..) - Expanded plastic and alveolar plates - Rigid foams (PU- PS-…) - Semi rigid foams (KAPA line®,…) - Composite materials for building : Alucobond®, Dibond®, Reynobond®,.. - Composite materials for industry (polyester resin loaded with glass fiber, carbone...

High productivity 4 axis multi head milling CNC machine optimized for sign applications and frontages in the building area. Refer to the exemples of applications : Aluminium frames Plastics and PVC frames Decorative friezes Building façades Milling equipment - 4 axes multi spindles: High productivity system for fast cutting of materials in plate in the building sector (facades), POP sector or fitting sector of commercial vehicles (refrigerated trucks,…). This 4 axis CNC milling machine can be equipped with a strong powered vertical electro spindle and horizontal electro spindle, adjustable on 360 degrees. Materials to be used on (according to the selected spindle and tool) : - Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..) - Expanded plastic and alveolar plates - Rigid foams (PU- PS-…) - Semi rigid foams (KAPA line®,…) - Composite materials for building : Alucobond®, Dibond®, Reynobond®,.. - Composite materials for industry (polyester resin loaded with glass fiber, carbone...

EVA foam has many positive properties. It has excellent adhesion to many polar and non-porous substrates, good resistance to cracks and punctures, and seals well with hot and heat sealing. Typically, this thermoplastic resin is co-polymerized with other resins such as LDPE and LLDPE or is part of a multi-layer film. Due to its flexibility and resistance, it recovers quickly from compression and absorbs colors. It has important applications as a sealant in meat and milk packaging, footwear, insulation wires and cables, pipes, toys, cork, photovoltaic capsules, medical packaging, the automotive industry, thermal adhesives, resin-based adhesives and glass lamination so it could improve impact resistance. It can be found in the automotive, construction, marine, electrical industries, healthcare, packaging, sports, recreation and footwear.

Build volume of 26.9 liters (7 gallons) 345.6 x 194.4 x 400 mm (13.61" x 7.65" x 15.75") ultra fast build speed up to 2.363cm³/ hour (144 in³/hour) Supported layer height: 30 / 60 / 100 microns Minimal feature size xy: 0.090 x 0.090 mm High throughput using resin 3D printing The mask stereolithography 3D printing process used achieves the highest throughput, because each layer is cured at once via a mask exposure - a time-consuming point-by-point processing of the construction space as with a SLA industrial 3D printer, a FDM industrial 3D printer and SLS 3D printer is not necessary. The large construction area makes this advantage particularly large. The Solidator is the largest resin industrial 3D printer that does without the disadvantageous perforated printing plate.

The RBT peristaltic hose pumps are high pressure positive displacement pumps, these range of pumps have a max design pressure of 15 bar, (150 metres), meaning they have the ability to transfer highly viscous fluids at long distances/high pressures making these range of hose pumps quite popular within the mining, construction, and slurry industries. Our RBT pumps are available with integrated frequency drives, VFD rated drive units, certified ATEX (explosion proof) motors, as well as hydraulic motors, these units are also equipped with reinforced hoses and rotors, heavily engineered integrated bearings, enlarged PU rollers as well as our patented clamping system making them suitable for pumping almost any fluid. Typical Applications & Industries: - Chemical Dosing - Water Treatment - Food/Beverage Transfer - Construction - Sampling - Mining - Paper Industry - Agriculture - Pharmaceutical - Industrial & Chemical Process Transfer – Glue, Resins, Ink, Paint, Dyes, - and More

Special polyester resins, glass fiber, gelcoats and additives

Nowadays, water isolation membranes are preferred in terms of both cost and ease usage among the methods used to prevent positive incoming water from passing into concrete structures. In non-insulated areas, water enters the structure overtime and cause deformation of the metal structures. This causes shortening of the life of the structure. In this sector, Purin offers aromatic, aliphatic, bitumen based and water-based insulation products with different properties. Aromatic structured products are cured with moisture to form a highly mechanical and highly elastic film. On the other hand, our water-based products which can be applied to moist surface, have high chemical resistance, elastic and aliphatic structure and are not affected by UV rays. PURINAQUA RM 703 - Aliphatic - Waterborne - 1C - Ready to use, high elasticity, UV resistant PURINAQUA SM 701 - Aliphatic - Waterborne - 1C - Ready to use, UV resistant PURINATE BM 201 - Aromatic - Solvent - 2C - Fast curving PU-Bitumen based

Gum rosin is a natural resin extracted from living trees. The product is therefore very sustainable and is widely used in various applications and industries. We offer natural resins from all major plantation regions.

The installation of resin flooring ensures factories and laboratories meet all safety and hygiene requirements. Not only that, but it benefits the people that operate within it.