Control units - Import export

The HZ series lifting platforms are lifting equipment to be installed in a fixed position and are operated by an electrohydraulic control unit. Manufactured according to the anti-accident guidelines, they consist of two lower and upper planks and a pantograph system operated by a hydraulic cylinder. TECHNICAL FEATURES: Sturdy structure Construction according to CE safety standard Top plate in smooth sheet Aluminum safety perimeter on the top deck European production hydraulic control unit, positioned externally, designed for intermittent use of 30% Pushbutton with low voltage controls Hydraulic system with overload safety valve Control valve for descent speed Over-dimensioned hydraulic cylinder with anticadut valve in case of pipe breakage Safety distance between the arms of the pantograph Self-lubricating sleeves Removable lifting hooks for transport and installation Yellow color RAL 1028 painting

Most industrial process temperature control units work through the pressure exerted on the water of the process utilities: this is convenient in most “standard” cases, given the higher efficiency developed by the system. However, some critical process issues can make this type of operation difficult: this is the case of machines that leak fluids, or with leakage, and that it is not convenient to maintain on the spot. In such cases, it is therefore useful to work with a vacuum temperature control unit, which sucks in utility water. FTT PD water thermoregulators are flexible and effective systems, which can work under either pressure or vacuum depending on the peculiarities of the system. Any fluid losses are therefore minimized during operations. A simplicity of operation is also ensured by the touch-screen panel, also found on other Frigofluid temperature controllers. Models with an increased pump are also available for users characterized by high pressure drops.

The REVO RT is a compact power controller unit, which integrates inside a single phase static group for each loop for control of the electrical power. Each unit manages 3 independent control loops. The unit can be purchased with the diagnostic functions for the load and for the SCRs. In this case there is a amperometric transformer for each channel. Each power channel is always equipped with extra rapid fuses . The power inside the unit, current transformer and extra rapid fuses in a single unit save a considerable space inside the panel and time for wiring . Available in the following currents: 35, 50, 75 and 90A with maximum voltages 480V and 600V.

The Ekinex® actuator / binary output for actuator control is an S-mode KNX modular device for panel mounting, which is able to convert electric signals in actions and therefore control motorized actuators. In order to function properly, the device has to receive a telegram from the bus, sent by a KNX sensor (for example a pushbutton, a sensor or another command/control device) or another KNX command device, which opens or closes one or more relays (such as blind control, etc.).

Ekinex® proposes system devices such as bus couplers or interfaces between KNX and USB devices. Those devices are used to build an efficient communication infrastructure and allow the system integration in different environments.

The Ekinex® products for temperature control are grouped in fancoil, electrothermal actuator and mixing group controllers. Fancoil controllers are KNX devices that operate as actuators or both actuators and room temperature controllers for air terminals such as fans, convectors and fancoils. The Ekinex® S-mode KNX devices for electrothermal actuator and/or servomotor control for zone valves are installed on the supply manifolds of the radiant plants or radiators. The mixing group controller regulates the supply temperature of the heating fluid using a selectable regulation mode, separately for heating and cooling.

The Ekinex® actuator / dimmer is an S-mode modular KNX device for panel mounting, able to command and regulate the brightness of lighting devices. In order to function properly, the device has to receive a telegram from the bus, sent by a KNX sensor (for example a pushbutton, a sensor or another command/control device) or another KNX command device, which opens or closes the corresponding relay or regulates the brightness of the connected lighting device.

The Ekinex® EK-IA1-TP CODESYS® PLC is an advanced, freely programmable logic module equipped with a KNX interface allowing the simultaneous execution of several complex logic blocks. The devices is equipped with an integrated bus communication module and is designed for rail mounting inside electrical cabinets.

Ekinex® proposes a KNX binary input and a 6 channel pushbutton interface. The binary input is an S-mode modular KNX device for panel mounting, used for the connection to the bus of traditional (i.e. not natively communicating on KNX bus) commands and sensors equipped with dry contacts. The pushbutton interface, besides being used as input, can also be used as an output line, with the specific purpose of controlling high efficiency indication LEDs.

The simple and essential design that makes compactness a distinctive feature. Pushbuttons, thermostats and flush-mounted inserts may be combined according to your taste and your needs.

Simple and linear. An essential form that suggests an idea of reliability and precision. A range of pushbuttons, touch-displays and plates which help to make yours the concept of home automation.