Cutters - Import export

Bolt cutter with high quality tool steel blade. Ergonomic non-slip handle.

HORIZONTAL DOUBLE CUTTERS BD 122 - BD 220 Universal cutters for cutting paper, corrugated cardboard, reinforced papers and polythene, polyethylene foil, polyethylene bubble, polyethylene foam. This series is very useful because you can use at the same time two different materials. The use of the cutter is extremely simple: it is necessary to carry the material to the desired length and manually operate the blade holding carriage, the cut is clean and precise in both directions. All the cutters are mounted on a frame complete with coil holder and rubber feet, on request may have the wheels with brake. For reasons of space the product is shipped disassembled. The cutter can be equipped with: RHOMBOIDAL BLADES: suitable for cutting plastic film, polyethylene foil, bubble wrap or foam. CIRCULAR BLADES: suitable for cutting paper, corrugated paper and reinforced.

Bench cutter with lever, portable, suitable for cutting of cardboard corners. Equipped with ergonomic handle with safety latch to lock it when the cutter is not in use and a small compartment for storing rulers, blades, markers and pens and leave the workbench ordered. Operation is very simple, simply enter the portion of the corner you want to cut into the slot and pull the lever down. The cutter is used during packaging operations to cut safety corners, normally 2 meters long, into smaller pieces to be placed on the corners of boxes and pallets to strengthen them and protect them during transport.

DIMENSIONS AND WEIGHT A mm 200 B mm 270 C mm 320 D mm 520 E mm 620 Weight kg 12 PACKAGING DIMENSIONS Box dimensions 34 x 42 x 40 cm Total weight 13 kg Volume 0.05 m³

DIMENSIONS AND WEIGHT A mm 260 B mm 360 C mm 320 D mm 710 E mm 850 Weight kg 24.6 PACKAGING DIMENSIONS Box dimensions 48.5 x 63 x 53 cm Total weight 25 kg Volume 0.07 m³

DIMENSIONS AND WEIGHT A mm 260 B mm 360 C mm 320 D mm 710 E mm 850 Weight kg 24.9 PACKAGING DIMENSIONS Box dimensions 48.5 x 63 x 53 cm Total weight 25 kg Volume 0.017 m³

The side cutters are used in conjunction with the pump to increase solid production and carry out dredging works in the presence of particularly compact backdrops.

The excavators are used in conjunction with the pump to increase the solid production and carry out dredging works in the presence of particularly compact backdrops. They are also available in High Depth version. Features: Cutting head is designed to reduce cost of wear parts thanks to interchangeable hard tooth Robust electric motor gurantees strong torque and long life Cutters are designed to work up to 250m working depth, handled by steel cable

The DRAGFLOW Cutter Head is a custom designed system. Our experts have carefully studied customer requests and the conditions in which you can find yourself working, coming to design the Dredging Head according to specific criteria, such as the profile, the size, the number and size of the teeth, their inclination. The Dredging Head (DTM) can be used in combination with the agitator, which allows to avoid clogging problems to the pump.

Impulse sealer with mechanical pedal and floor support for the closure of bags in plastic material heat-sealable, impulse sealing (resistance to heat for a few seconds) and timer for adjustment. At the end of the sealing is possible to trim the bag with the cutter installed on the bar. The open structure also allows you to install a coil on the back of the machine and to obtain envelopes of the desired length using the tubular film. The sealing head can be tilted up to 45 ° to allow the closure of the envelopes containing liquids or powders. Maximum thickness of 0.15 mm sealable . (0.30 mm. Overall)

MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal

MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal

ME SERIES HI - single bar 5 mm. (suitable for medium thick envelopes in PE, polypropylene, coupled light) Welders Series ME HI 5 mm with closure lever, allowing the sealing of heat sealable plastic bags with thickness up to 0.40 mm total. The models ME HC 5 mm are equipped with cutter for trimming of the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. The sealers ME HC are available in sizes 300, 400 and 500 mm. This series of sealers makes a sealing of 5 mm, very beautiful and suitable for food bags or if you want a more valid and robust sealing than the standard 2 mm. This sealers have a impulse sealing (resistance heats for a few seconds) and a timer for adjusting the sealing time. The sealing cycle is indicated by an indicator light. With manual sealing bar, sealing width 5 mm., Maximum thickness of 0.20 mm weldable. (mm. 0.40 total).

Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing.

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.

Engine displacement: 700cc Replaceable teeth Radial piston hydraulic motor Oil requirement: 35 l/min each Weight: 500 kg Speed: 30 r.p.m-50 r.p.m. Torque: 314 kgm Rotates in both directions

The function of this equipment is to catch contaminants into the pulper by a rope (mainly metallic wires and plastic) in order to keep the vat clean.

Automatic machine for cutting cheese into slices with variable or predetermined weight and dimensions. Versatile and flexible, the ROCK 20PLUS model is designed to work in line with other machines from Caseartecnica Bartoli or stand alone. Technical features Rock 20 Plus automatic for cutting cheese: Small size. Suitable for working in line with pre-existing machines or by Caseartecnica Bartoli, for the complete automation of the production cycle. Number of cuts programmable by PLC. Interchangeable bells, for the perfect centering of cheeses with different shapes. Quick and easy replacement of the bells. Fully automatic operating cycle. Easy-to-extract worktop to facilitate cleaning and sanitizing of the machine. Multiple recipes for various types of products and cuts. Special, interchangeable blades for cutting semi-hard, hard and very hard cheeses. Automatic weighing with external scale. Programmable fixed weight cutting.

1. block magazine 2. hydraulic block tilter 3. pneumatic alignment 4. transport belt conveyor 5. sheet cutting station with automatic wire setting 6. bottom scrap collection 7. vertical cutting station with automatic wire setting 8. powered roller bed adjustable in width 9. down cutting station with automatic wire setting 10. powered roller bed 11. de-stacking unit 12. transfer roller bed 13. pre-crusher for scraps