Wheel - Import export

Ems99 specializes in the production of steel marking wheels. As with the production of punches, the customer is given the opportunity to customize the characters according to his needs: he can choose between numbers, letters and other special characters. The type of incision proposed with this technique is cut or flat. Wheel marking allows you to get precise work in a short time, suitable for various materials such as aluminium, steel, stainless steel, plastic, cast iron and others.

ALUMINUM LIFT TABLE Aluminum lift table, lightweight and practical with 100 kg capacity and maximum lifting height mm. 755. Folding handle.

DOUBLE PANTOGRAPH WHEELED PLATFORMS Double pantograph lifting platforms with pedal pump, 4 wheels, 2 fixed and 2 pivoting, holding brake, chrome handle for pushing, hand lever for the descent at a controlled rate, enamel paint dried in the oven.

Wheeled lifting platforms with single pantograph, hydraulic foot pedal pump, 4 wheels (2 fixed and 2 steering), brake, chrome handle for pushing, hand lever for the controlled speed descent, oven painting.

WHEELED BASES FOR DRUMS SERIES SD FP55 (DRUMS DIAMETER mm. 580/600) Reinforced wheeled bases for the transport of drums with a diameter of about 610 mm. and weight max. 250 Kg. The SD Series enables a high stability and security because it has wheels polyurethane installed outside the structure. The wheeled bases are available in yellow. Available models: SD FP55B wheeled base made of painted steel SD FP55D wheeled base made of stainless steel SD FP55F wheeled base made of painted steel - reinforced

It can be realized in economic manner and with reduced overall dimensions with roller conveyors curves up to 180 °. This type of roller conveyors are an economical solution to the problem of handling boxes and packs along 90 ° or 180 ° paths, avoiding the use of more expensive pneumatic diverters. The idle 90 ° curves can be combined to obtain 180 ° curves, and allow you to create packaging lines even in confined spaces, thanks to their small footprint. They have widths of 500-650-800 mm and can be equipped with metal wheels with a diameter of 48 mm, or metal rollers with a diameter of 32 or 48. The metal wheels, thanks to their particular smoothness, allow the advancement of the boxes also with a minimum inclination.

Mechanical platform with wheels and single pantographwith actuation by crank. The platform consists of a sturdy steel frame and is equipped with polyurethane wheels with locking brake. The movement ascent and descent takes place through the actuation of a crank with threaded pin which opens and closes the pantograph. Turning the handle clockwise opens the pantograph and the platform is lifted, naturally turning counterclockwise this lowers. (is the system of mechanical cric). The mechanical crank platform is used primarily as a work surface and where you have to make a few lifting because it is slower than the hydraulic models. It 'also suitable for assembly of molds or mechanical components in tight spaces because it does not have the the driving tiller and is not bulky.

Trolleys FP with hook fastening barrel and fork holding. FP Trolleys are available in three different models. - Model FP15 - Model with two solid rubber wheels 200mm - Model FP79 - to 300-liter barrels. Model with 3 wheels cushion 260 mm - Model FP36 tippers - Model with 4 solid rubber wheels. FP 15 - CART FOR DRUMS WITH 2 WHEELS Trolley FOR drums FP 15, equipped with a hook fastening for barrel and fork holding.Complies with CE standards.

SHORT MANUAL PALLET TRUCK MODEL FPBF25 L950 Structure in drawn steel with rounded fork tips. Hydraulic unit built entirely of steel mounted on high precision thrust bearing. Control lever 3 positions with adjustable lowering speed. Lifting operated rudder and automatic recall upright. Safety valves for hoist limit and overload. Directional wheels aluminum with rubber elastic diameter 200 mm. mounted on ball bearings. Load nylon rollers diameter 82 mm with double ball bearings.

MANUAL TRANSPALLET MOD. FP BFZ 20 W 320 NARROW With special joined forks and only 320 mm width. Maintains the solid structure of pallet standards but allows the handling of heavy loads with reduced dimensions.

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

Knife sharpener, one of the smallest creations in the Fac house, simple and easy to use, equipped with two internal wheels and a power button on the top

Single packaged or in 10 pieces boxes.Wide by 6 cm wheels parking One space stand grounded bike rack – with patented system in black varnished steel with black pvc caps. Lower curves are a patented design by ANDRYS srl to set even the disk brake bikes. Single packaged or in 10 pieces boxes.Wide by 6 cm wheels parking dimensions : 38.5 x 29 cm h. 67 cm -Wide by 6 cm wheels parking

One space varnished grounded-based bike rack with fixed wheels. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes

One space ground-based bike rack with swivel wheels in varnished steel.

One space ground-based bike rack with fixed wheels, in varnished steel.

With PVC pipe and head, with steel tube and PVC head. They are mounted vertically with sliding guide functions; horizontally for special applications such as the mounting for tangential belts in motor-driven conveyors through driven base rollers or rollers with pulley for flat belt. With plastic wheels on steel axles, assembled in sequence, they are used as an alternative to tapered rollers in gravity curves for the handling of packages with a flat supporting surface and light loads. The wheels can be individually assembled, fixed on flatbeds by means of suitable brackets, in correspondence with exchanges between curves and tracks with idlers, in conjunction between tracks with ortogonal motor-driven rollers or with the function of guide-abutment of packages.

The POLY-D wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products. Lifetime of these wheels has been improved thanks to the complete absence of air bubbles inside the finished product, obtained through our new production process. The POLY-D wheels can be fitted into a specific series of brackets for which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted, for both industrial and food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel. The POLY-D wheels can be used on trolleys for food industry, tannery industry, equipment and trolleys for meat and fish industry, slaughterhouses, ice cream machinery and flower trolleys

The D-FLEX wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty** against the de-bonding of the elastic Polyurethane tyre from the wheel centre, plus they grant a high cut and tear propagation resistance. Combines the load capacity and the resistance to wear and tear of the polyurethane with the ability to overcome obstacles and to reduce noise, vibrations and impacts of the elastic rubber. The Polyurethane tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. Recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses, pharmaceutical industry, floor-washing machines and scrubbers, and for traction.

The D-NAMIC wheels are manufactured through a new vacuum - dryer - high pressure process, entirely developed by DC, which results in the higher quality wheel in its range of products, and the only one to be covered by a lifetime warranty against the de-bonding of the Polyurethane tyre from the wheel centre. The Polyurethane tyre grant a high cut and tear propagation resistance, is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or chemical bonding. The D-NAMIC wheels can be fitted into a specific series of brackets for which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted, for both industrial and food industry. D-NAMIC are recommended on trolleys for food industry and chemical industry, industrial trolleys, equipment and trolleys for meat and fish industry, slaughterhouses and textile industry.

The wheel core of the RHT series is manufactured in special Ditherm® compound, combined with special fibers and molded under an innovative DC developed high pressure + extreme temperature process, and its tyre is made in a special high quality elastic rubber for high temperatures. The black rubber tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or vulcanization such as for almost any competition product. This particular bonding is resulting in the highest quality wheel in its range of application, featuring a drastic reduction in the risk of tyre de-bonding during the work in temperatures. They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement.The RHT wheels can be fitted into a specific series of brackets for high/low temperatures.

The XTW series is the only wheel which is assuring a temperature resistance up to +400°C and not being made out of aluminum or cast-iron, with the big advantage to preserve the floor and to secure a dramatic reduction of noise if compared to metal wheels.They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement. The XTW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted in the world of uses in temperatures and bakery / food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304 / 316, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel. They are RoHS - REACh compliant.

The STW series wheels are manufactured with an exclusive DC Di Candia Ruote’s composite material, the THT, which has been studied and developed in our plant in Besnate, and is used exclusively for the production of this wheel range. These wheels grants a superior and unmatched mechanical resistance to heavy impacts, an outstanding resistance against chipping and breaking caused by hitting of sharp obstacle and a great rolling capacity even in plain bore configuration, thanks to the self-lubricating properties of the THT material. They also assure an incredible resistance against aggressive cleaners, chemicals, oils, acids, steam and salty water, and are available with plain bore and with double special HT ball bearings, to allow a perfect rolling capacity in any condition of use. The THT material is certified by FDA for contact with foods. The STW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced.

The wheel core of the RXT series is manufactured in special Ditherm® compound, combined with special fibers and molded under an innovative DC developed high pressure + extreme temperature process, and its tyre is made in a special high quality elastic rubber for high temperatures. The white rubber tyre is mechanically bonded to the wheel core, and the coupling is further strengthened by a surface adhesion which is obtained without the use of any glue or vulcanization such as for almost any competition product. This particular bonding is resulting in the highest quality wheel in its range of application, featuring a drastic reduction in the risk of tyre de-bonding during the work in temperatures. They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement. The RXT wheels can be fitted into a specific series of brackets for high/low temperatures.

The MTW series has replaced the old “phenolic” wheels, and is manufactured in special Ditherm® compound, combined with special fibers and molded under an innovative DC developed high pressure + extreme temperature process which results in the highest quality wheel in its range of application. They are available with several types of hubs and bearings, in order to allow the perfect response and the best need / price ratio for any type of high or low temperature requirement. The MTW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted in the world of uses in temperatures and bakery / food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304, and are available in both metric and inches standard sizes, also available in double-layer galvanized steel.

The LTW series wheels are manufactured in high grade Polyamide and filled with glass fibers plus additional natural fibers, and molded through a new vaacum and material drying process to assure high resistance in temperatures bewteen -40°C and +150°C. They are available with plain bore and with HQS self lubricating bushes, to allow a good rolling capacity in any condition of use. The LTW wheels can be fitted into a specific series of brackets for high/low temperatures, which are specifically studied and produced to fulfill the extremely wide variability of conditions to which they are submitted in the world of uses in temperatures and bakery / food industry. Brackets are fully certified and manufactured with food and sanitary grade Stainless Steel in AISI 304 / 316, and are available in both metric and inches standard sizes, and are also available in double-layer galvanized pressed steel.

Xtreme-x series, the new range of Stainless Steel brackets grants a significant step beyond in the worldwide panorama of wheels and castors for food industry, bakeries, cleaning industry, hospitals, hygienic equipment and in every application where the use of Stainless Steel castors is required. Xtreme-z series, the new range of Zinc-plated steel castors is setting a new step beyond in the wide range of galvanized steel castors, extremely flexible and suitable for all uses from industry to supermarkets. Thanks to the new concept of plate-fork computerized moulding is featuring an extreme precision in tolerances and in ball race shape control, offering the best swivel capacity in every condition of temperature and load. The improved load capacity (over 10%) and the high standard of the assembly assures a long life of the castors which are 100% free from maintenance.

BAVELLONI MAX 80 CNP - Year 2011 13 Cup Wheels Beveller Min. Size 40x40 mm Speed 0,5-4,1 m/min. Thickness 3-25 mm Max Bevel Width 60 mm Power 26 kW Machine Dimensions : 8,4 x 1,7 x 2,3 m Weight : 5300 kg