Laminating machine - Import export

double heating system with pre-heating that concurs to fuse with very low temperature respect to the standard temperature pressure system with “OUT” function for very delicate woven inside and outside belts cleaning devices carbon/graphite lower belt separation blade automatic turn ON and turn OFF by digital timer COUPLING, LAMINATION, TRANSFER, APPLICATIONS - COMPLETE LAMINATION LINE THAT CONCURS THE COUPLING OF 2 OR MORE LAYERS OF WOVEN WITH INTERLININGS, WEB GLUE OR FILM GLUE DIAGNOSTIC ON THE CONTROL PANEL introducion of the several rolls of wovens, interlinings, web glue or film glue by engine rolls perfect syncrony between fusing machine winding module and rewinding unit by inverter automatic cut machine availabilty for worked parts winding unit with vertical and horizontal control for a perfect alignment of the woven rolls during the winding fusing machine connected to the winding and rewinding module by inverter exit zone with rewinding unit equipped

Reel with 8 metres of Ø 20 hose with a 3/4” fitting

Bare reel for Ø 20 hose with a 3/4” fitting (capacity: 8 m).

2304 pivot for hose-reel >10 metres 7317 pivot for hose-reel

Reel with 10 or 15 meters of hose Ø 25 with 1" connection

Reel with 10 metres of Ø 20 hose for petrol with a 1” fitting

Reel with 10 metres of Ø 20 hose with a 3/4” fitting

Bare reel for Ø 25 hose with a 1” fitting (capacity: 10 m).

Bare reel for Ø 20 hose with a 3/4” fitting (capacity: 14 m).

NBR flexible impeller pump for diesel and oils Trolley: vertical Suction kit: foot valve, cam fittings and 3 metres of hose Discharge kit: cam fittings and 3 metres of hose, spout Voltage: single-phase 230 Volts Max. TDH: 15 metres Voltage: single-phase 230 Volts Power: 0.25 kW (FiLTRO-JEP40), 0.55 kW (FiLTRO-JEP80) Orifices: 1" (JEP040), 1"1/2 (JEP080) Hose Ø: 25 millimetres (FiLTRO-JEP40), 40 millimetres (FiLTRO-JEP80) Flow rate: 2.1 m3/h (JEP040), 4.8 m3/h (JEP080)

Filter unit guaranteeing a double filtration For oil and diesel by absorbing the water and impurities present Filtration capacity of the first cartridge: 30 μ with water absorption Filtration capacity of the second cartridge: 5 μ for impurities Flexible suction hose: 3 metres with a built-in foot valve and a 3-metre discharge hose Structure: a trolley on wheels with a large diameter and retention tray

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23)

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (perbunan) (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length Trolley-mounted pump with the CHAR version

Body, flange, screw and shaft: stainless steel Couplings: stainless steel (nylon as an option with code -A) Membrane and valves: made of a hydrocarbon-resistant elastomer (Neoprene as an option with code -A) Lever: zinc-plated steel with a rubber handle, 1 metre in length

Continuous management system for the tank's level. OCIO reports the static pressure created by the height of the liquid via a tube inserted in the tank, and displays the level or volume of the liquid.

Grease dispensing gun with an oval gear meter Pressure: 550 bars

Delivery guns with built-in oil meters, with a pre-set electronic meter

Designation: meter / flow meter Possible bodies: aluminium Seals: viton or PTFE Gears: aluminium Orifices: 1/8’’ - 4’’ Autonomous, mechanical, digital display unit with pulse generator or preselector

Materials: aluminium body - polypropylene turbine Orifices: 1" BSP M/F Max. pressure: 20 bars Digital meter: for low-viscosity fluids with a turbine-equipped measuring system Charge loss < 0.03 bar (120 l/min with diesel) Accuracy: ± 1% in the flow rate range Repeatability: 0.2% Temperature of use: from -10°C to +50°C Measuring system: calibratable turbine

Orifice: 1" M-M + adaptor 1" F-F Max. pressure: 10 bars 5-digit partial display Totalising meter: 6 digits

Materials: aluminium, polypropylene Orifices: 1’’ M-F Max. pressure: 20 bars Display: 5-digit partial Totalising meter: 6 digits Liquids: diesel

The display unit enables you to connecting remotely to a meter with a pulse generator, via a cable with a max. length of 15 metres. It can be used in 3 different ways: As a simple remote display unit. In this case, it is powered by batteries. As a remote display unit and also for transmitting pulses to another external device, such as a PLC or another display unit. Here too, it is powered by batteries. As a remote display unit and for transmitting pulses to another external receiver, such as a computer, while being powered by the latter.

Materials: aluminium - polypropylene Max. pressure: 20 bar Orifices: 1" M-F

Materials: aluminium - Acetal resin gears Max. pressure: 70 bar Orifices: 3/4'' F

Materials: aluminium - Acetal resin gears Max. pressure: 30 bars Orifices: 1" F

Materials: aluminium - Acetal resin gears Max. pressure: 70 bar (K400-I and K604-I), 20 bar (K700-I) Orifices: 1/2'' F (K400-I), 1"1/2 F (K604-I), 2" F (K700-I)

Materials: aluminium - Acetal resin gears Applications: oil Max. viscosity: 2000 mm²/s Orifices: 3/4" F Max. pressure: 70 bar

Materials: aluminium - Acetal resin gears Applications: diesel, anti-freeze Max. viscosity: 2000 mm²/s Orifices: 1" F Max. pressure: 30 bars

Materials: aluminium - Acetal resin gears Applications: diesel, oil, anti-freeze Max. viscosity: 2000 mm²/s (K200 and K604), 5000 mm²/s (K400) Orifices: 1/8’’ F (K200), 1/2'' F (K400), 1"1/2 F (K604) Max. pressure: 550 bar (K200), 70 bar (K400), 20 bar (K604)