Lifting equipment - Import export

The EV-300 electro-pneumatic lifting beam is an autonomous device intended for handling any glass on site or workshop.

for raising the height of glazing on a veranda roof. Portable device for immediate action on site.

Activated in a few seconds on site Very robust compact construction •Invertable fork with adjustable width Two Ø 200 mm wheels for easy transport on site • Base equipped with 2 stabilizing arms • Feet with adjustable height wheels Lifting cable anti-torsion in very high resistance steel Level for perfect control of the position of the feet Lifting winch with automatic brake • Steel pulleys on bearings

It is an autonomous device thanks to its battery power supply and with its supplied equipment it is also a versatile load lifter for construction site or workshop.

"for workshop or construction site allows you to Transport, Handle, Turn over any glass surface from floor to ceiling. It can be used with our EV 300 electro-pneumatic lifting beam. Very compact construction. For very easy transport on site, it is possible to assemble it on the site of use"

BD 400 is the universal portable electric lift for raising glass or windows Thanks to its unique construction, lifting loads as close as possible to a wall is also possible. It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use.

for transporting, lifting and rotating glass panels with virtually no physical effort. Put into action in just a few seconds on site.

"The DW 380 manual plate lifter reduces labor costs It allows a single person to install plasterboard on the ceiling or under the roof. Thanks to its unique construction (patent pending), it can be transported on site like a suitcase. Activated on site in 30 seconds"

Universal portable manual lift suitable for all vertical lifting for safe work thanks to its special anti-twist mast and its offset winch with automatic brake.

Versatile portable load lifter for any construction site or workshop. For easy transport in the vehicle folds in seconds

Folding hand truck for use in any vehicle, workshop or office. This versatile elevator or vertical load lifter will always have its place to move and translate any load effortlessly.

Portable electric plate lifter for raising any plasterboard or placo up to a height of 5.2 m. Avoids physical fatigue and is 10 times faster than a manual plate lifter.

BD 400 is the universal portable electric lift for raising heavy loads safely. Thanks to its unique construction, lifting loads as close as possible to a wall is also possible It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use. Mast with aluminum anti-twist rails Only 2 elements: the elevator and the lifting accessory Immediate use on site, activated in a few seconds without tools 230 V single-phase electric motor with speed variator Possible use in the event of a power outage using the crank provided (or battery-powered screwdriver) Integrated torque limiter, cuts off lifting in case of overload Easy transport on site thanks to transport wheels Stabilizer with adjustable length wheels By design, the feet are placed in front of or behind the mast (for facade work)

CA 400 P - Universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct or other load Load capacity 150 kg - Lift height 4 m Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided

CM 520 - Portable electric lift, load capacity: 140 kg up to 3 m 130 kg at 4 m 90 kg at 4.9 m Low weight portable device - only 38 kg Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V single-phase electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power outage using the supplied crank or screwdriver on batteries

"CM 340 universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct, awning, pergolas or other load Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided.

Lödige Industries has more than 70 years’ experience in heavy goods lifting. Our Aircraft lifting equipment is known for its reliability, accuracy and durability. Reliable equipment for raising staff to the aircraft to enable your team to work on the undercarriage, access the cabin and all assembly areas. Mobile or fixed Lödige lifting platforms ease and speed up the painting of aircrafts. We have also developed lifting equipment for working on the aircraft interior.

DOUBLE PANTOGRAPH WHEELED PLATFORMS Double pantograph lifting platforms with pedal pump, 4 wheels, 2 fixed and 2 pivoting, holding brake, chrome handle for pushing, hand lever for the descent at a controlled rate, enamel paint dried in the oven.

Mechanical platform with wheels and single pantographwith actuation by crank. The platform consists of a sturdy steel frame and is equipped with polyurethane wheels with locking brake. The movement ascent and descent takes place through the actuation of a crank with threaded pin which opens and closes the pantograph. Turning the handle clockwise opens the pantograph and the platform is lifted, naturally turning counterclockwise this lowers. (is the system of mechanical cric). The mechanical crank platform is used primarily as a work surface and where you have to make a few lifting because it is slower than the hydraulic models. It 'also suitable for assembly of molds or mechanical components in tight spaces because it does not have the the driving tiller and is not bulky.

ALUMINUM LIFT TABLE Aluminum lift table, lightweight and practical with 100 kg capacity and maximum lifting height mm. 755. Folding handle.

LAWECO lift platforms are mainly used for rationally stacking and destacking wood up to a stack weight of 120 tons. Additional typical applications include overcoming height differences as well as rapid raising and lowering of individual pallets. In use with a two-floor magazine

The HD series lifting platforms are lifting equipment to be installed in a fixed position and are driven by an electro-hydraulic control unit. The double pantograph structure allows a high stroke and reduced overall dimensions (only the minimum height increases). Built according to accident prevention guidelines, they are equipped with a fall protection valve and a safety perimeter. General characteristics: Very robust structure in painted steel Construction according to CE safety standards Upper platform in smooth sheet Aluminum safety perimeter on the upper platform High quality hydraulic power unit, internally positioned, designed for intermittent use of 30% Push-button panel with low voltage controls Hydraulic system with safety valve for overload Control valve for descent speed Oversized hydraulic cylinders with anti-fall valve in case of broken pipes Anti-shearing safety distance between the pantograph arms Joints with self-lubricating bushings

FPHK 285-C - DRUMS TILTER FOR FORKLIFTERS The FPHK 285-C tilter has a fork-mounted structure and is suitable for lifting and emptying metal drums from lt. 200 with diameter mm. 580-600. The device is complete with a band for locking the drum, a frontal safety rod and an angular transmission with a handwheel for rotation. The tilter can also lift plastic drums with edges but only of the type that can be seen in the picture.

Wheeled lifting platforms with single pantograph, hydraulic foot pedal pump, 4 wheels (2 fixed and 2 steering), brake, chrome handle for pushing, hand lever for the controlled speed descent, oven painting.

PLIERS FOR DRUMS MOD. DL FP 350 The clamp DL 350 for drums used to lift quickly and safely metal drums Lt. 200 and diameter mm. 600 and maximum weight of 350 kg. The pantograph structure for weight effect applied closes blocking with a strong grip on the drum board. The pliers can be attached directly to a crane or you can attach to the forks of a forklift truck using appropriate lifting straps (not supplied). If you use a forklift we recommend pairing with forks hook MKFP 1000.

HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.

The HZ series lifting platforms are lifting equipment to be installed in a fixed position and are operated by an electrohydraulic control unit. Manufactured according to the anti-accident guidelines, they consist of two lower and upper planks and a pantograph system operated by a hydraulic cylinder. TECHNICAL FEATURES: Sturdy structure Construction according to CE safety standard Top plate in smooth sheet Aluminum safety perimeter on the top deck European production hydraulic control unit, positioned externally, designed for intermittent use of 30% Pushbutton with low voltage controls Hydraulic system with overload safety valve Control valve for descent speed Over-dimensioned hydraulic cylinder with anticadut valve in case of pipe breakage Safety distance between the arms of the pantograph Self-lubricating sleeves Removable lifting hooks for transport and installation Yellow color RAL 1028 painting

Lifting platform HY 1001 pantograph with low profile. Also included in the price is the access ramp of 1200 mm length, for the discharge and the load by pallet truck. Features: Structure in high thickness sheet steel with high thickness Construction according to European safety standards Electrohydraulic control unit positioned externally Keypad with protection IP 54 positioned on the hydraulic power pack Security perimeter aluminum on the upper platform Hydraulic power unit designed for intermittent use by 30%. Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Joints with self-lubricating bushings Lifting hooks removable for transportation and installation Mechanical lock for maintenance Painting with yellow RAL 1028 Access ramp length 1200 mm for pallet truck

The lifting platforms HW-C series are lifting equipment to be installed in a fixed position and are driven by a hydraulic power pack. Manufactured according to the accident prevention, they consist of two platforms (upper and lower) and a pantograph system actuated by a hydraulic cylinder. The HW-C series is characterized by the perimeter protection bellows. Main Features: Very strong structure in painted steel Construction according to CE safety standards Upper platform in smooth metal sheet Perimeter protection bellows Hydraulic unit of European production, positioned internally, designed for intermittent use by 30% Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Antishearing safety distance between the arms of the pantograph Joints with self-lubricating bushings Lifting hooks removable for transportation and installation