Machine quality certification - Import export

The depth catch net with large net is ideal for sampling solids and organisms below the water surface. The sampler is particularly suitable for sampling from basins, tanks, shafts, open waters, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory. The depth stop can be clamped to any height of the sampler by means of a C-clamping screw. This ensures that the sampler penetrates to the same desired depth each time it is pierced. The penetration depth is thus fixed and can be precisely recorded, e.g. in a test report or sampling instructions. In addition, the depth stop can prevent accidental puncturing during sampling. The depth stop for samplers is useful in all areas where the sampling parameters must be precisely determined and defined, e.g. in the outgoing and incoming goods inspection of bulk materials that can segregate. Simply attach the depth stop for samplers to a sampling tube with Ø 25 or 50 mm and tighten with an Allen key (5 mm).

The surface net with flat net is ideal for sampling and collecting solids and organisms from the water surface. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open waters, etc. Sample depths of up to 6 m can be reached with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Pendulum beaker made of polypropylene with graduation and spout available in three sizes. The beaker automatically swings into the horizontal position. This prevents spillages. Also suitable for deep and narrow shafts (Ø 150 mm). Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sampling depths of up to 6 m can be achieved with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

Robust pendulum cup made of stainless steel V2A (1.4301) for industry and water treatment. The cup automatically swings into the horizontal position. This means that nothing can spill. The small diameter (Ø 130 mm) also makes it suitable for deep and narrow shafts. Particularly suitable for sampling from basins, tanks, shafts, open water etc. Sampling depths of up to 6 m can be achieved with the length-adjustable aluminium telescopic rods. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

A registration certificate is a document that allows you to legally convert a medical device (hereinafter referred to as a medical device, MI) on the territory of the Russian Federation. A registration certificate is issued on the basis of an Order of the registering authority (Federal Service for Supervision in the Field of Healthcare/Roszdravnadzor) after passing all the mandatory stages of state registration, during which the registration dossier is formed

The fundamental principles of type 3.1 and 3.2 certification are defined in the standard BS EN 10204:2004. The standard is usually applied to metal produced by mills in the form of bars, plates, tubes etc. The standard can also be adapted to products manufactured from such metal material (valve bodies, flow meter casings etc.) please click here for more information. - Inspection Certificate Type 3.1 - Inspection Certificate Type 3.2 - Remarking Of Products - Upgrading to EN 10204 3.2

A fire certificate is a document issued by a certification body in the field of fire safety confirming that the products comply with the requirements of technical regulations and, if applicable, the requirements of fire safety standards.

The Certificate and Declaration of Conformity of the Customs Union is a document confirming compliance with the safety requirements of products subject to the technical regulations of the Customs Union, issued in circulation on the territory of Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan.

The purpose of the Defect Sorting service( DSS) also call Full Inspection is to sort out as many products as possible that have known issues (ex: specific cosmetic defects, function problems, or packing imperfections, etc.) during the number of man-days allocated. Other checks will not be done during this inspection. This service ensures each piece of finished products meets specified quality requirements that from customer. Sorting Inspection puts one engineer and several operators onsite perform 100% inspection, to ensure each piece can meet client’s requirement, all defect ones will be sort out. Why You Need Defect Sorting Inspection (DSS): If the goods is expensive or very important, you cannot afford any risk of defects, you can use our sorting inspection make sure all shipping goods were perfect, you don’t need worry about any quality risk. What is the benefit of the Defect Sorting Service (DSS) ? See link: http://aqiservice.

The Pre-shipment-Inspection (PSI) also called final inspection is to ensure the products have been manufactured match to the Clients specifications and packed ready to ship. At this stage, normally 100% of products have been completed。 Our professional quality engineer will help to solve any problems immediately and the inspection report with full information will be emailed to you within 24 hours The Pre-shipment Inspection (PSI) service will include your interests as below but not list all: Contract quantities The packing way and related labels The storage way of your products Appearance Function, size and measurement Reliability and safety tests Related shipping files Other specified requirements from you Sampling techniques will be ANSI/ASQC Z1.4-2003 (equivalent to MIL-STD-105E) or other sampling technique required by you.

The During production Inspection (DPI) provides a quality check, normally for the first time of the finished products. It ensures that all processes and products are being produced to the agreed standards and timeframes. Our professional quality engineer will help to solve any problems immediately to ensure a smoothly running production and the inspection report with full information will be emailed to you within 24 hours The During Production Inspection (DPI) Service will include your interests as below but not list all: Verifying the production and quality plan Inspecting the packing way and related labels Inspecting the storage way of your products Inspecting workmanship appearance Inspecting function, size and measurement Making the reliability and safety tests Other specified requirements from you Sampling techniques will be ANSI/ASQC Z1.4-2003 (equivalent to MIL-STD-105e) or other sampling technique required by you.

The fundamental principles of type 3.1 and 3.2 certification are defined in the standard BS EN 10204:2004. The standard is usually applied to metal produced by mills in the form of bars, plates, tubes etc. however the standard can also be adapted to products manufactured from such metal material (valve bodies, flow meter casings etc.) - Inspection Certificate Type 3.1 - Inspection Certificate Type 3.2 Qtech Control is audited and approved as a Type A, ISO 17020 inspection body for type 3.2 material certification and type 3.2 certification of engineering products by the international accreditation body ASCB.

When importing products into Russia, you need to comply with a wide range of complex certification systems and national standards. Depending on the nature of the goods you are planning to ship to Russia or to another Commonwealth of Independent States (CIS) country, you may need to gain one or more approvals. We also help exporters and importers of equipment and consumer goods to enter the Russian and European markets through certification against national and international standards. We arrange EAC certificate which is a document attesting that your products conform to the regulations of the Member States of the Eurasian Customs Union and is obligatory for most imported goods, especially cosmetics, foodstuffs, toys, textiles, electrical and industrial equipment. We test, inspect, certify and advise! Certification, EAC certificate, Declarations, EAC certificate, TR CU certificate, Quality Certificate, Certificate of Conformity, Safety Certificate, Customs Certificate, EAC marking,

While carrying out export operations in other countries, including the EU countries, products must be safe for human health and environmentally friendly. Products falling within the CE marking requirements must be certified by one of the EU accredited laboratories or by an accredited laboratory outside the EU (in any case, test reports must be submitted to one of the EU accredited institutions in order to receive EC certificate of conformity). We cooperate with the leading organizations specialized in certification of products, works and services. We also establish close cooperation with certification organizations of European countries (outside the EEC), African countries, the Near and Middle East countries.