Magnetic field measurements - Import export

The new capacitive sensor system capaNCDT 6228 is designed for measurement tasks with ambient temperatures up to +800 °C. Up to four high-temperature sensors of the CSE/HT series can be connected simultaneously to the powerful controller. The integrated high-temperature sensor cable compensates for interference from electric or magnetic fields. Furthermore, the measured data is output both analog and digital via modern interfaces such as Ethernet and EtherCAT.

Application: Position detection on hydraulic steering cylinders Robust customized sensor, NOVOPAD non-contacting inductive measuring principle. - magnetic field resistant - redundant for safety category 3 / PLd - non-contacting position detection - protection class up to IP 69K Automotive-Applications.pdf For more information please contact: automtive@novotechnik.de, +49 711 4489-197

Induction magnetometer allows to measure magnetic field isotherms of magnetization (magnetization versus magnetic field (M(H) dependences) in the fields up to 2 T and in the temperature interval from 80 to 370 K. Magnetization is measured by induction method. Specification: - temperature interval — from 80 to 370 К, - magnetic field interval — from 0,02 to 2 Т, - relative measurement accuracy of magnetization - 2 %, - maximal sample dimensions - Ø1.5 × 3.7 mm. Magnetometer (its measuring part) consists of the measuring insert, electronic module and control and data acquisition program and can be used together with the magnetocaloric measuring setup (which includes permanent magnet adjustable magnetic field source, liquid nitrogen cryostat, temperature controller, 2 digital voltmeters, control computer with corresponding interface and control boards).

Experimental setup for express measurements of the adiabatic temperature change in the room temperature range. The setup is intended for measurements of the magnetocaloric effect (MCE), namely adiabatic temperature change (ΔТ), in the temperature range from 273 to 370 K in order to get ΔТ versus temperature dependences rapidly and evaluate suitability of using of the material under investigation as a working body of magnetic refrigerators. The measurements in the setup are conducted by the direct method with the help of a thermocouple. The magnetic field change is accomplished by linear movement of the permanent magnet magnetic field source along the measuring insert. The setup operates in automatic mode under control of the program written on LabView. The setup includes: - the desktop measuring unit, - the desktop control unit, - the ΔТ measuring system, - the control computer. The enhanced algorithm of the setup operation makes possible to investigate up to 20 samples per day.

Multi-Jet Semi- Dry Dial (Domestic) Cold Water Meter / 360° rotatable cover / Display on 5 roller counter mechanism m³ and 4-roller for litres / %100 Brass materials body / Glycerine protection on the roller counter / Non return valve / Magnetic field protection / DN15 ~ DN20 dimension / Measuring range R160 / Pulse, M-bus, RF (Radio Frequency) output interfaces (optional) / Hermetically sealed register (IP68) / Electrostatic e/p powder painted / External adjustable screw / Water temperature up to 50°C / 2 years of warranty ** Certifacates: •2014/32/EU - MID MI-001 Water Meter •EU Type Examination Certificate •Module D- EU Verification Certificate •ISO 4064:2015 / EN14154-1:2005, OIML R 49:2006 •ISO 9001:2015 / ISO 14001:2015

Measurement of magnetic and electrical signals with STL's unique 26 bit ADC's For measuring electric and magnetic fields the STL's unique 26 bit ADC pioneers works in an underwater system. In addition to deployment and recovery the chain configuration by a single cable used for power and data transmission uses three or more sensors platforms are fully connected to the base station. Environmental and pressure sensors use an ultra low noise isolation preamplifier, and the analogue sensor front end is formed by 3 pairs of UEP Carbon electrodes. The 26-bit analogue to digital converter is what the digital part is based on with a novel high end performance. Geometry compensated signal output through the consequent digital signal processing provides temperature. To achieve the software alignment the tilt sensors are used to achieve the precise settings with a pair of high resolution electric field vector components.

AMT&C LLC offers a full range of services in calculations, design and manufacturing of permanent magnet assemblies with required magnetic field configuration. Many years experience in complicated magnetic systems production combined with application of modern most effective magnetic materials permit us to reach high parameters: - to produce, with permanent magnet systems, the magnetic flux density up to 3 Tesla and more; - to reach high homogeneity up to 105; - to create magnetic systems with complicated field pattern; - to produce adjustable magnetic field generators on the basis of permanent magnets. The magnetic field changing rate in such systems can reach 10 Tesla per second.

Our coil systems are specially designed to generate very large magnetic fields in 1 to 3 dimensions. Every system essentially consists of 2 units: The coil system and the current control system to set the coil currents. The systems can be used for calibration, to compensate external fields, to generate specific magnetic fields, magnetic gradients etc. Our specification scope ranges from: - Frequency ranges: DC to 4 MHz, - Field ranges: from a few microtesla to 200 millitesla - Homogenity ranges: 1%, also over large volumes with small coil sizes - Field stabilities up to a few ppm FS - Size range from a few cm to more than 200 m - Actively compensated for environmental changes or uncompensated (optional) - Generating both magnetic fields and magnetic gradients with or without compensation - Magnetic far field drop off: r-3 to r-11

STL offers the earth magnetic field simulator (EMFS) which can be used for worldwide simulation of the earth magnetic field. Earth Magnetic Field Simulators (EMFS) are typically being installed in a bay area or river estuary as well as artificial harbours. The EMFS System is used for calibration of the onboard degaussing system (OBDS) and Navy vessel's preparation for any operation missions and the dedicated simulation of the magnetic field in the area of mission. Quantity and type of used sensors, sensor array, software and coil system including power sources are always designed in respect of the specific requirements of the customer. STL can supply: - Complete sensor array - Data acquisition system - Control and evaluation software - coil cables and power sources Pricing may vary depending on the requested cable length, available power supply and required magnetic field.