Manual tooling - Import export

The most common manual strapping tool for plastic straps. Practical and economical, it is particularly suitable for polypropylene strap with width 12 mm and thickness max mm. 0.8. The closure is done with a metallic tooled seal to increase tightness. Upon request, you can use it in fruit and vegetable sector equipping it with a hook for boxes and containers (optional).

Manual strapping tool for flat surfaces (sealless). Manual steel strapping tool easy and reliable to use in medium/heavy industrial duty applications. It requires a flat surface with a minimum length of 150 mm. Works with glossy or blue steel strap from mm. 13 to mm. 19 with thinkness up to 0.6 mm. The tightness of the seal depends on the material type and strapping choice.

The strapping tool ST IMPA 13/16 is usable with both polypropylene strap and polyester strap (green, high resistance) from 12 to 16 mm. Given the high tightness of the seal it is recommended to use a polyester strap. The breaking load depends on the strap of choice.

This kit is the easiest and most economical kit for strapping and is used especially when you do not need a battery tensioning device or larger coils. This kit is suitable for strapping of pallets up to 800 kg, considering putting two straps for each pallet. The holding capacity of strap dipends on material type and on strap choice.

Manual strapping tool for flat surfaces (sealless), easy and reliable to use in heavy industrial duty applications. Version equipped by steel made tension lever and rear feedwheel protection. It requires a flat surface with a minimum length of 150 mm. Works with glossy or blue steel strap from mm. 13 to mm. 19 with thickness up to 0.70 mm. The tightness of the seal depends on the material type and the strapping choice.

Manual steel strapping tool, lightweight and sturdy, with sealless joint. Suitable for medium/heavy duty packages with flat surface for supporting the tool. It can be also used on packages with irregular shape, however a flat surface with a minimum length 150 mm is needed. Works with glossy or blue strap mm. 13-16-19 with thickness max. 0.6 mm. The holding capacity of strap dipends on material type to strap and on strap choice

Strapping tools for metal strapping 10-13-16/18-19-20 mm manual for flat surface, joint with copper-plated steel seal. Simple and cheap, is used for strapping packages and pallets of any size. This strapping tool requires a flat surface with a minimum length of 200 mm. In general it is not recommended in case of high productions. The sealing depends on the type of material and strap.

HP-131-C38 - manual hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 38 mm Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

HP-131-C32 - manual hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 32 mm Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

HP-131-C26 - manual hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 26 mm Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

HP-60-CK - manual hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Two stroke hydraulic system for fast forward Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

HP-60-H - manual hydraulic crimping tool, 55kN, CU185mm² for exchangeable dies series "60-H", "5" Two stroke hydraulic system for fast forward Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

HP-60-HE - manual hydraulic crimping tool, 55 kN, CU185mm² for exchangeable dies series "60-H", "5" Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

HP-35 - manual hydraulic cimping tool, 35 kN, CU150mm² for exchangeable dies series "35", "4" Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

Incremental linear encoder for manual machine tools or measuring applications with counter display. Magetic detection principle makes it extremely insensitive against contamination such as oil, water and dust. Wide tolerances for easy installation For connection to LG20 and LH70 series position indicators

Made of electropolished stainless steel, the INOX 200 handles loads of up to 200 kg. It was specially developed for industries with rigorous requirements in terms of cleanliness and hygiene (IP66) and is therefore frequently used in the pharmaceutical and food industries. The model can be equipped with electric or manual tools, for example to move reels, Euro stacking containers or barrels – depending on the lifting task in question. All tools for the INOX 200 are made of pure stainless steel.

Powerful, long-lived, precise: GMN motor spindles for manual or automatic tool change stand for quality and efficiency, and are well-suited to your grinding, milling, drilling or special applications.

When the going gets tough, the IMPACT 200 is the most reliable and durable lifter. This is because it effortlessly copes with of up to 200 kg total weight. And with amazing stamina, too. Thanks to its exchangeable batteries, it can work 24 hours a day for you without loss of power. We have designed a range of electrical and manual tools for really heavy tasks, and you can configure these as required. You can easily move reels or drums by remote control for example, according to your choice. This not only makes your processes more fluid, it also gives you a whole new level of flexibility in terms of the efficiency of your existing production processes. In addition, you can choose the right mast height, undercarriage and platform to suit your operations.

With its extremely compact dimensions and its powerful integrated hydraulic, the high performance VNG 152 is the perfect helper in tight mounting situations. Blind rivet nuts from M3 to M8 (aluminum and steel) can be set quickly and easily. As usual for Honsel, the tool will be supplied completely with all necessary modification parts.s.

Processing of blind rivets nuts up to M12 Very compact. Very powerful. Despite the very small dimensions, the conception as a ratchet tool allows the processing of blind rivets nuts up to M12 (aluminum and steel)!! The perfect tool for repair tasks is supplied in a high quality case in aluminum look.

A real Honsel bestseller - sold ten thousand times! A first-class hand tool for blind rivet nuts and blind rivet bolts with a 360° rotating head for hard-to-reach processing positions. Including in a sturdy plastic case with an assortment of 150 UNIVERSAL blind rivet nuts and RIFBOLT blind rivet bolts! Assortment: 25 x blind rivet nuts UNIVERSAL STEEL M4, Small countersunk head, Grip range: 0.5 - 3.0 mm 25 x blind rivet nuts UNIVERSAL STEEL M5, Small countersunk head, Grip range: 0.5 - 3.0 mm 50 x blind rivet nuts UNIVERSAL STEEL M6, Small countersunk head, Grip range: 0.5 - 3.0 mm 25 x blind rivet studs RIFBOLT® STEEL M4, Dome head, Grip range: 0.3 - 2.0 mm 25 x blind rivet studs RIFBOLT® STEEL M5, dome head, Grip range: 0.5 - 2.0 mm

Durable, robust, and reliable: the hand tool VNG 371 for the processing of blind rivet nuts (M5 to M10) and blind rivet bolts (M5 to M8). The VNG 371 is supplied in an impact-resistant plastic case and equipped with a comfortable drill rod for the easy lowering of the set connector and a quick-change system for the mandrels.

Working range Blind rivet nuts from M3 up to M10 of all materials and M12 aluminium and steel Technical data Weight: 2.4 kg Stroke: 6 mm The GBM 50 stands for proven technology in a new design. With its compact design the tool sets blind rivet nuts up to M12. Furthermore the GBM 50 has a quick-drill establishment for a simple and safe drilling of the blind rivet nuts. The tool provides low effort by high lever. The exchange of nosepiece and threaded mandrel is possible without any tool. Nosepiece and threaded mandrel are also compatible with the GBM 40-R.

Working range Blind rivet nuts from M3* up to M6 alu and up to M5 steel, brass and stainless steel Technical data Weight: 600 g Total length: 260 mm Stroke: 7 mm Accessories Standard: Threaded mandrel and nosepiece M5 (optional also with M4 or M6) Maintenance instructions with spare parts list Stroke table Features • Simple lift setting via a knurled nut for safe and complete setting of the blind rivet nuts • Threaded mandrel protection via spring ring for fast tool-free replacement of the threaded mandrel • With opening spring for simple handling • Body in high-quality die cast aluminium • Body head made of forged chrome-vanadium steel • Ergonomic handles

Working range Blind rivet nuts from M3 up to M10 of all materials and M12 aluminium and steel, blind rivet nut studs M4-M8 Technical data Weight: 1,25 kg Stroke: 6 mm The GBM 40-R is compact, functional and fast. With its compact design the tool sets blind rivet nuts up to M12. Furthermore the GBM 40-R has a great application access and low weight. The ratchet function provides a very good power transmission. The exchange of nosepiece and threaded mandrel is possible without any tool. Nosepiece and threaded mandrel are also compatible with the GBM 50.