Beam design - Import export

Hardwood Oak beams are designed primarily for construction purposes such as masonry wood construction. You can get the clean lumber beams, air dried as well as before or after planing, or rustic oak beam for construction and carpentry purposes in different sizes on demand.

In the softwood category will find a variety of pine wood beams. Pine beams are designed primarily for construction purposes such as traditional construction and wood construction. You can get it air dried pine timber beams or killed dried in the oven as well as before or after planing, in different sizes on demand. Wooden pine beams lumber are intended mainly for industrials purposes using several of qualities, sizes, and shapes

EAE Seismic Support Systems offer rigid solutions for installations that require earthquake protection. The seismic supports, which can be utilized in any type of installation, allows for quick and easy installation due to the accessories that are designed for steel beam and space roof connections.

Multi purpose, all-round, ultrasonic flowmeter for liquids in all industrial processes The OPTISONIC 3400 flowmeter is an unique, 3-beam, inline, ultrasonic flowmeter, designed especially for measuring homogeneous conductive and non-conductive liquids, with high accuracy and reproducibility, over a long period of time. This provides extensive self-checking of internal circuits and information regarding the health of the measuring sensor, but just as importantly, vital information about the process and process conditions. Fieldbusses are, HART®7, Foundation Fieldbus, Profibus PA and Modbus, all with NAMUR NE 107. These advanced diagnostic features makes process life comfortable, reliable and accurate over a long period of time.

Unlike traditional detection systems, Reflected Beam Smoke Detectors were designed for spacious rooms, open areas, and high ceilings. Their innovative features make them popular choices for spaces like warehouses, atriums, arenas, and churches. With only one device to install and align, these single-ended optical beam solutions save you time and money on open-area and high-ceiling applications. The firebeam protection system includes a motorised head unit containing an infra-red transmitter and receiver, a ground level controller and prism reflector. Making use of the prism reflector the returned infra-red beam is analysed for smoke contamination and registers a fire condition at a pre-determined level. At ground level the controller unit is used to make operational adjustments. The standard protection system covers a range of 5 to 40 meters. https://vedardalarm.com/conventional-reflected-beam-smoke-detection-p-169 https://www.vedard.com/forum

This anchorage point (Ø 16 mm) and its base plate (100 x 100 mm) are manufactured completely from stainless steel. The device is simply screwed permanently onto a wooden beam. It is available in different lengths and comes with the 4 stainless steel screws required for installation. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Min. beam dimensions: 100 mm x 120 mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

If you are looking for an unobtrusive anchorage point to secure up to 3 individuals, simply attach this stainless steel anchor loop (Ø 5 mm) to a wooden beam. Once installed on a pitched roof, this anchorage device is virtually invisible. All you need for quick-and-easy installation are the 2 stainless steel screws provided. EN 795:2012, A + CEN/TS 16415:2017 Virtually invisible anchorage loop Designed for load-bearing wooden structures The loop is simply screwed onto a wooden rafter (also suitable for over-rafter insulation) Minimum rafter dimensions: 60 mm x 120 mm

Once attached to a beam using the 2 long screws provided - with the 14 smaller ones screwed straight into the wooden panelling - this stainless steel anchorage point (Ø 16 mm) and its base plate (200 x 200 mm) reliably protect roof workers & Co. from falling. This device was awarded national technical approval by the German Institute for Construction Technology (DIBt). National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 abZ: Wood min. 24mm EN 795: Wood min. 24mm Incl. installation set Add a supporting tube for usage as an end or corner post in a lifeline system

Simply clamp this stainless steel anchorage point (Ø 16 mm) onto a beam (max. 150 mm) using its base and counter plates. Do the dimensions of your beam differ? Upon request, we can also supply anchors with national technical approval in custom sizes. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 Clamped onto a wooden beam using a base and counter plate (max. girder width: 150 mm) Add a supporting tube for usage as an end or corner post in a lifeline system Incl. stainless steel installation set Available for other beam sizes upon request

This stainless steel anchorage point (Ø 16 mm) is clamped onto a concrete beam measuring max. 150 mm using the base and counter plates provided. We can also supply this DIBt-approved (German Institute for Construction Technology) anchor in special sizes upon request. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 Clamped onto a concrete beam using a base and counter plate Available for other beam sizes upon request Upgrade with a supporting tube for usage as an end or corner post in a lifeline system Incl. stainless steel installation set

December brings the biggest and best countdown opportunities of all, and increasingly adults can join in with some advent fun of their own. STI Group has developed a grown up advent calendar for Jim Beam, designed to sweeten the run-up to Christmas Eve. Twenty-two chocolate bottles with a Whisky praline filling provide a delectable and memorable indulgence for most days of advent.

December brings the biggest and best countdown opportunities of all, and increasingly adults can join in with some advent fun of their own. STI Group has developed a grown up advent calendar for Jim Beam, designed to sweeten the run-up to Christmas Eve. Twenty-two chocolate bottles with a Whisky praline filling provide a delectable and memorable indulgence for most days of advent.

H20 Timber beams TAVR are designated for application as a bearing element of wall formwork. The flanges are made of solid oriented wood, that helps the beam to have very high load-bearing capacity. Plywood web made of high-quality Northern coniferous trees has a width of 24 mm. Beams up to 3 meters long produced of undisturbed strip. For production beam over 3 meters long wall is interlocked with a quality longitudinal pin (3 cm). The web and flanges are fixed by glued mini-dovetail jointing. The beam surface was treated with a special yellow paint that made its surface weather resistant and all beams are supplied with plastic caps that helps to protect them from damages and prolong it`s service life. Warranty period is 40 cycles. We use only modern European manufacturing equipment and pay much attention to the quality control.

Unique components that reduces maintenance need. Made to run for many years at toughest conditions for great cuts. Unique construction features combined with great craftmanship Machine body and upper beam’s steel constructions have been designed according to minimum stretch and optimum resistance criteria.

Special design of through-beam sensor. Transmitter and receiver are located in the fork or angular limbs and are perfectly aligned to each other.