Coated sheets - Import export

Our Infrared ovens can be produced as conveyor belt tunnel or internal return (U) type. Our ovens have andirect heating system with radiation heat transfer. They are used due to the cure flat shaped parts after wet or powder coating paint applications. They are preferred because they can cure the paint three times faster than the convectional type ovens. They can be produced with natural gas or lamp type infrareds. The inner surfaces of our ovens’ panels are produced with a galvanizedor stainless steel sheets and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thicknesses determined and rock wool or glass wool is used for insulation.

Our continuous type ovens can be produced as belt tunnel type, internal return (U) type or with span conveyor. Our ovens have the indirect heating thermo-block system with convection heat transfer. It can be manufactured according to power supply sources like electricity, gas or liquid fuel. The inner surfaces of our ovens’ panels are produced with galvanized sheet and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thickness (usually 160 mm) is determined and only rock wool is used for insulation. Air curtains in the furnace are placed inlet and outlet of the oven to minimize heat loss while increasing the efficiency.

Our box type ovens have the indirect heating thermo-block system with convection heat transfer. It can be manufactured according to power supply sources like electricity, gas or liquid fuel. The inner surfaces of our ovens’ panels are produced with galvanized sheet and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thickness (usually 160mm) is determined and only rock wool is used for insulation. For paint applications up to 220 °C, for special purposes up to 400 °C ovens can be produced by our company. The doors of our box type furnaces can be produced as double-sided, top opening or as guillotine door according to needs.

Standard: AISI, ASTM, BS, DIN, GB, JIS, AS ETC   Thickness:  0.12-3.5mm   Width:1250/1220/1200/1000/914/762(before corrugation)930/915/910/905/900/880/875/815/810/790/780/680/670/660/655/650(after corrugation) or as required.   Ditch and Peak after corrugation: 12 Ditches/11 Peak; 11 Ditches/10 Peak; 9 Ditches/ 8 Peak   Length: In coil or as required   Zinc Coating: Z40-275g/sqm    Paint Top: 15 - 35 Microns    Paint Back: 5 - 35 Microns    Coating Color: ALL RAL Cards Color    Coating Type: Top Painted : PVDF / HDP / SMP / PE / PU                            Primer Painted : Polyurethane / Epoxy / PE                            Back Painted : Epoxy / Modified Polyester   Coil Weight: 3-8 Tons   Coil ID: 508/610mm Color: RAL Code Or According To Customer's Sample   Spangle: No spangle, With spangle   MOQ: 5 Tons   Package: Standard Sea Worthy Package   Port: China

The B 400 combines great evaporation performance with economical continuous operation in a sturdy housing. Thanks to the permanent rotation, the air is effectively washed and at the same time humidified before being evenly distributed back into the air in the room without condensation, by means of a 2-speed fan. The B 400s quiet-running synchronous motor enables even large rooms to be humidified without running up large electricity bills. B 400 Benefits in practice: Clearly designed operating panel with hygrostat and fan control and level indicators Rotating evaporation fleece cleans and washes the air 2-speed fan Automatic power-off Adjustable vent grid Robust, powder-coated sheet steel construction With built-in brace for optimal air circulation

Hai Tong focus on sheet metal parts and we are professional sheet metal bender in China, we develop various kinds of sheet metal boxes using blanking, bending, TIG welding, grinding, and powder coating, some sheet metal boxes can be waterproof with IP65.

SIGNICOLOR is a pre-coated aluminum sheet that combines aesthetics and functionality. The high-quality surface of SIGNICOLOR is ideal for screen and digital printing, laminating and lacquering for aluminum signs. Due to its smooth, high-gloss finish, no further treatment is needed after delivery. This sheet is ideal for a broad range of applications, including advertising signs, pylons, informational signs, logos and stairway advertising. Used for aluminum signs both indoor and outdoor, SIGNICOLOR undergoes strict quality controls. It’s easy to handle, cost-effective, stable and durable.

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

ELECTRICAL SPACE HEATER TDS 120 RProfessional heating for large building areas: With the TDS 120 R and a full 30 kW heating force Owing to 30 kW of heating power, the most powerful model of the TDS-R series comes with convenient spare capacity for the permanent heating of larger rooms and is hence especially suited for temperature control in larger building sections. Accommodated in a comfortably transportable and stable carriage construction with ball-bearing wheels, the fully galvanized, coated steel sheet housing of the electrical space heater TDS 120 R houses high-quality corrosion-protected stainless steel heating elements, which immediately after switching on generate formidable heat flowing out in large volumes via the powerful air circulating follow-up fan. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat and the heating capacity can be increased in two stages up to 30 kW for maximum selected warmth.

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

YOU TAKE CARE OF THE COLOR, WE TAKE CARE OF THE QUALITY For paint tests, we are able to produce paint test panels that are made of various materials, offering a wide range of coatings, shapes and surface finish options. Of course we attach great importance to meeting your requirements. Upon request, we supply bright-finish, degreased or pre-treated panels. Moreover, test panels can be provided with drilled holes or rounded corners. You can also order test specimens made of any common materials such as wood, glass, aluminum, steel or plastic for the TABER abraser test. From various metals From various plastics With boreholes Bare or pretreated Degreased and vacuum-packed Various sizes upon request Coil-coated aluminum or sheet steel upon request

Good formability and conductivity make our products useful for condenser case products produced via drawing processes. Manufacturers of these aluminum case applications rely on Novelis to provide high-quality aluminum coils or sheet in alloys such as 1050 and 3004. Novelis produces pre-painted aluminum for scales, dials and nameplates in laser engraving quality, in the form of a surface-treated coil or sheet. Specialized coatings are applied by rollers. Printing is possible via standard commercial inks and paints with no special materials required.

Automatic control of thermal diebolts of extrusion dies The DieControl APC Pro automatically controls thermal bolts of extrusion dies according to the earlier measured cross-section profile of the material. This results in uniformly thick films, sheets or coatings even with fluctuations in the feed, material change or when starting the system. The automatic control and the extrusion close to the set point also achieve considerable material savings and quality improvement.

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Framework galvanized bolted steel. Wall / Facade Structure made of galvanized steel, cladding of nonflammable Plasterboard A1. Cladding of concrete fiber panels (natural, rock and wood appearance). Roof Panel and galvanized steel roofs, a wide selection of roof coating (galvanized and painted trapezoidal sheet or sandwich panel coating with polyurethane insulation, or tarred corrugated plates). Metallic or Pvc rain gutters and drainage pipes. Insulation Rock wool or glass fiber Door exterior (Steel, aluminum, Pvc, fireresistant doors, antiintruders protection); interior( Mdf, Aluminium, Pvc, fireresistant doors) Windows Doubleglass with Pvc or aluminum frame, doublepanel windows, sliding or guillotinestyle. Parasol, rolling shutter in Pvc, steel antiintrusion protection. Painting Exterior in silicone or epoxy. Interior polyurethane. Electrical system lighting structures, sockets and switches, cables, fuses and fuse boxes, relays.

Galvanized structure filled with zinc coated sheet metals. Subsequent surface finish with paint RAL 7035. Delivered without stickers andock. Special safety hole for used textile insertion. Height of the insertion hole handle 1250 mm.

Cabinet Materials Saddled Dkp 0,70 mm. Electrostatic powder coating is applied on the sheet. Leg Materials Saddled Dkp 1,50 mm. Electrostatic powder coating is applied on the sheet. Surface Care You can clean your cabinets by wiping them with a damp cloth. Avoid prolonged contact with water. 2 shelves. Ventilation grids. Name plate. Hanger hooks. Clover lock system suitable for padlock installation. Color: RAL 7035 GREY. Can be produced in custom color. Contact your customer representative.

Cabinet Materials Saddled Dkp 0,70 mm. Electrostatic powder coating is applied on the sheet. Leg Materials Saddled Dkp 1,50 mm. Electrostatic powder coating is applied on the sheet. Surface Care You can clean your cabinets by wiping them with a damp cloth. Avoid prolonged contact with water. Ventilation grids. Name plate. Hanger hooks. Clover lock system suitable for padlock installation. Color: RAL 7035 GREY. Can be produced in custom color. Contact your customer representative.

Cabinet Materials Saddled Dkp 0,70 mm. Electrostatic powder coating is applied on the sheet. Leg Materials Saddled Dkp 1,50 mm. Electrostatic powder coating is applied on the sheet. Surface Care You can clean your cabinets by wiping them with a damp cloth. Avoid prolonged contact with water. 2 shelves. Ventilation grids. Name plate. Hanger hooks. Clover lock system suitable for padlock installation. Color: RAL 7035 GREY. Can be produced in custom color. Contact your customer representative

Cabinet Materials Saddled Dkp 0,70 mm, painted on the sheet with electrostatic powder coating system. Leg Materials Saddled Dkp 1,50 mm. Electrostatic powder coating is applied on the sheet. Surface Care You can clean your cabinets by wiping them with a damp cloth. Avoid prolonged contact with water. Ventilation grids, name plate, hanger hooks. Clover lock system suitable for padlock installation. Product color: RAL 7035 GREY Can be produced in custom color. Contact your customer representative.

Cabinet Material Saddled Dkp 0,70 mm, painted on the sheet with electrostatic powder coating system. Leg Materials Saddled Dkp 1,50 mm. Electrostatic powder coating is applied on the sheet. Surface Care You can clean your cabinets by wiping them with a damp cloth. Avoid prolonged contact with water. 2 shelves, ventilation grids, name plate, hanger hooks Clover lock system suitable for padlock installation. Product color: RAL 7035 GREY Can be produced in custom color. Contact your customer representative.

Cabinet Material Saddled Dkp 0,70 mm, painted on the sheet with electrostatic powder coating system. Leg Materials Saddled Dkp 1,50 mm. Electrostatic powder coating is applied on the sheet. Surface Care You can clean your cabinets by wiping them with a damp cloth. Avoid prolonged contact with water. 2 shelves, ventilation grids, name plate, hanger hooks Clover lock system suitable for padlock installation. Product color: RAL 7035 GREY Can be produced in custom color. Contact your customer representative.

Cabinet Materials Saddled Dkp 0,70 mm, painted on the sheet with electrostatic powder coating system. Leg Materials Saddled Dkp 1,50 mm. Electrostatic powder coating is applied on the sheet. Surface Care You can clean your cabinets by wiping them with a damp cloth. Avoid prolonged contact with water. 2 shelves, ventilation grids, name plate, hanger hooks Clover lock system suitable for padlock installation. Product color: RAL 7035 GREY Can be produced in custom color. Contact your customer representative.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 5 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 3 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

GCR swirl diffuser is equipped with fixed blades bent at a constant angle. It is made of galvanized steel sheet, powder coated in RAL9010. Swirl diffusers ensure mixing of the fresh air stream with the room air, which is recommended for supplying cold air. They provide a stable flow of the stream and are intended for rooms up to 4m high, for example in public facilities such as hotels, restaurants, office buildings. The perforated plate leads to rapid air flow velocity decrease at low noise levels.

Based on the customer technical data ad requirements, we offer complete manufacturing solutions. Aluminum anodizing is also available

An industrial fan with dimensions of 250 mm is an essential piece of equipment for every production plant that cares about the health of employees. It ensures the highest comfort of work and safety. It is perfect for public buildings, warehouses, industrial halls, as well as farm buildings. The product is entirely based on Polish electronics. 5-year manufacturer's warranty. 50 years of DOSPEL experience in production is a guarantee of the highest quality.