Gauges - Import export

The Sonatest AlphaGage+ series is definitely a key asset for inspectors, maintenance operators or QA technicians looking to measure essentially any engineering material thickness as it combines years of ultrasonic design and knowhow. Packaged in an extremely rugged and ergonomic hand held enclosure, the AlphaGage+ is a versatile piece of equipment as it can be used to perform integrity assessment of metal steel works affected by erosion or corrosion processes as well as measure precisely the thickness of critical pieces of equipment which have very strict quality control requirements.

The compact ECO2-Ei digital manometers are budget-friendly and provide a good resolution. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The compact LEO2-Ei digital manometers are budget-friendly and provide high accuracy. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The LEO1-Ei digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The high-accuracy LEO-Record-Ei digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery. Intrinsically safe – suitable for use in explosive atmospheres.

The high precision of the LEX1-Ei digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided). Intrinsically safe – suitable for use in explosive atmospheres.

The LEO3 digital manometers also output the pressure values as an analog signal for display purposes and have an RS485 interface for integration in bus systems and communication with computers. The current 4...20 mA measured value is shown on the display at the same time as the pressure value. The minimum or maximum value since the last reset can also be displayed at the touch of a button. Power is supplied directly via the 4...20 mA circuit.

The compact ECO2 digital manometers are budget-friendly and provide a good resolution. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).

The compact LEO2 digital manometers are budget-friendly and provide high accuracy. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. The swivel adapter allows the device to be optimally positioned. Power is supplied by a conventional CR2430 coin cell battery (provided).

The LEO1 digital manometers have a measuring interval of 5000 individual measurements per second, which allows them to record fast pressure peaks. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).

The high precision of the LEX1 digital manometers makes them ideally suited to calibration and test applications. The minimum or maximum value since the last reset can be displayed at the same time as the current pressure value in a wide variety of units of pressure. Power is supplied by a conventional CR2430 coin cell battery (provided).

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

Innovacera developed a series of ceramic accessories for Inside Micrometers, Holtest and Dial Bore Gages. The ceramic material used mostly is zirconia. The zirconia ceramic setting ring advantages: Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers. If a setting ring of an optimal size is prepared, it can be used for calibration. Actual inside diameter is marked on each ring No more anticorrosion treatment is required when handling Ceramic Setting Rings normally, resulting in simple maintenance and storage. The Zirconia Ceramic Ring Gauges tolerance: Tolerance between the nominal size and the actual diameter: 0.001mm for 1-45mm DIA. setting rings Cylindricity: 0.001mm for 1-45mm DIA. setting rings Some Zirconia Ceramic Ring Gauges Innovacera made: 9mm, 10mm, 18mm, 20mm, 24mm, 25mm, 28mm

Although control and measurement devices (tests) should and most often are used in a very safe way, they still require cyclical measurement control and regeneration and possible calibration in order to obtain the required measurement accuracy, reliability and repeatability. Ensuring the stability and certainty of quality control - in this case control measurements - translates directly into the quality of manufactured parts and related possible complaints, repair costs and / or service actions. In order to avoid such situations, it is necessary to take care of the impeccable condition of the measuring instruments. Therefore, both in the event of a fault on the gaugecaused by a mechanical factor, related to an accident or an unfortunate coincidence, as well as in the case of the approaching time of cyclic calibration, which, depending on the conditions and intensity of use of the test, should

Continuous management system for the tank's level. OCIO reports the static pressure created by the height of the liquid via a tube inserted in the tank, and displays the level or volume of the liquid.

For all water jet pumps available

Pressure gauges for maintenance units, pressure regulators and control panel installation, Fastening elements, linking accessories and brackets, containers, drainage valves, control magnets, Spare parts for compressed air treatment equipment

Bourdon tube pressure gauges Stainless steel, polypropylene or phenolic Wetted parts AISI 316L or monel Dial size: 63 mm,100 mm to 160 mm Ranges from -1...0 to 0...1600 bar Solid front, safety version S3

The LEO5 digital manometers combine a range of functions from other KELLER manometers in a water-tight stainless steel housing. They can detect pressure peaks with a measurement interval of 5 kHz and record all measurements. Current measured values and saved data can be read out via the USB connection. The pressure values can be shown on the extra-large display in a wide range of units of pressure, which are either pre-programmed or configured by the user.

The high-accuracy LEO-Record digital manometers can record pressure and temperature autonomously for long periods thanks to their memory function. The data logger can be connected to a computer via the RS485 interface for configuration and for reading out the recorded data. The current pressure value can be displayed in a wide variety of units of pressure. Power is supplied by a high-quality 3,6 V lithium battery.

Tank gauges, oil pressure gauges, oil temperature gauges, boost pressure gauges, ammeters and voltmeters for additional installation. All items are from wellknown manufacturers in the field of display instruments

A quick thickness control of blankets, plates or underlay foils outside the printing press: This is the main function of the transportable, analog BIRKAN thickness gauge. It allows you to check in no time the thickness of your cylinder packing and prevent printing problems. The thickness gauge is equipped with a special feeler for soft materials such as rubber printing blankets. However, other materials not thicker than 5 millimetres can be equally measured.

The sensor elements of the EDS series are protected by a pressure resistant stainless steel housing. As target, an aluminum sleeve is used which is integrated into the piston rod and is passed without making contact and wear-free over the sensor rod.

The P-Pen 1000 Ex from Schütz is the compact measuring device for the exact determination of operating pressures up to 5 bar. o simple operation o reliable measurement results o small and compact o extremely robust o with Ex Protection approval

The P-Pen 5000 Ex from Schütz is the compact measuring device for the exact determination of operating pressures up to 5 bar. simple operation, reliable measurement results, small and compact, extremely robust, with Ex Protection approval

Housing steel. Viewing glass thermoplastic polyamide. O-ring and flat seal rubber (NBR). Reflector aluminium. Screw and hex nut steel. Version: Housing painted black. Transparent viewing glass, high mechanical stability, non-ageing, temperature resistant with oil up to 100 °C, with water up to 70 °C. Reflector painted white, markings and scale black. Screw and hexagon nut, electro zinc-plated. Note: The oil level gauges can either be fastened as shown in the illustration or directly in the threaded hole. Centre distance for the fastening holes = L1 ±0.5. The oil level gauges are suitable for tanks operating without pressure. Maximum operating temperature: 100 °C.

Sustainable solution for process measurement, control and data log Compatible to the wide range of INFICON active gauges, the new VGC50x series of active gauge controllers are able to monitor and data log the entire pressure range from 10⁻¹⁰ to 1500 mbar (10⁻¹⁰ to 1125 Torr) and the set point status. The new VGC50x Active Gauge Controller series is the advanced successor of the discontinued VGC40x series which was the 1:1 compatible product Leybold`s Center-Controller line Material-No Typ 230 002 Center ONE 235 002 Center ONE (USA) 230 004 Center TWO 235 004 Center TWO (USA) 230 003 Center THREE 235 003 Center THREE (USA) As the direct successor for these series the new and advanced VGC50x series is able to accept all INFICON Active Gauges Successor product for VGC40x Controller series 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 1×10 -3×F.S. …1×F.S. 5×10 -4…1500 5×10 -4…1500 5×10 -4…1500 5×10 -10…1500 5×10 -10…1500 5×10 -10…1500 mbar, Torr, Pa, hPa, Micron, V mbar, Torr, Pa,...

The INFICON Bayard-Alpert Pirani Combination Gauge, BPG402-S, functions as two gauges in a single compact unit measuring from 5×10 -10 mbar to atmosphere (3.8×10 -10 Torr to atmosphere). Combining technologies reduces the complexity of installation, setup, and integration. Choose the BPG402-S with two yttrium oxide coated iridium filaments for affordable and repeatable process to base pressure measurements in one economical package. Sensing elements with on-board calibration data guarantees high reproducibility when exchanging sensors. This Bayard Hot Ion (Dual Filament) Pirani Combination Gauge BPG402-S series direct replacement for Hot Ion - Pirani Transmitters of the ITR 200 series: Material-No Typ Material-No Typ 353-570 BPG402-S DN 25 ISO-KF = 230 250 ITR 200 S DN25 KF 353-574 BPG402-SP ProfiBus, DN 25 ISO-KF = 230 252 ITR 200 SP DN25 KF, PB 353-571 BPG402-S DN 40 CF-R = 230 254 ITR 200 S DN40 CF-R 353-576 BPG402-SD DeviceNet, DN 25 ISO-KF = 230 253 ITR 200SD DN25 KF,...