Loading robots - Import export

Shuttle system for moving robots and heavy loads for long distances with high dynamics. The motion system is available with recirculating ball guides or rollers while the driving system has been designed with rack and pinion. The shuttle is equipped with adjustable ties to achieve alignment even on irregular surfaces. Cable carrier and dampers at the stroke end are included. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

The EasyPalletizer from EasyRobotics is a stationary palletizing robot for loading pallets with cardboard boxes or workpieces. The system is positioned on a conveyor belt. Then the robot picks up the cardboard box or the workpiece with a gripper. Depending on the proramization, it then sets it down on the pallet according to the customer’s requirements. The integrated ER+ software facilitates the programming of the sequence. Structure In combination with the Universal Robots robot UR10e the palletizer is available in different versions: On the one hand, the EasyPalettizer can be equipped with a base with lift. This makes it possible to move a stroke of 265 mm with the robot. Crates and workpieces can be stacked even higher on the pallet. Furthermore, it is possible to install a fixed base. This limits the standard height of the robot to 855 mm. In addition, the base can also be completely dismantled. This is useful if the palletisation will not reach great heights.

Ideal automation solutions for loading and unloading of parts on machining centres, presses, measuring stations, etc… Convenient, accurate, repeatable and reliable! The CLA Robot Cell is composed of the following: - A polyarticulated robot or scara with specific grippers - A camera device for part recognition - Automatic camera calibration - Parts loading/unloading system - Protection (cage, mats, detection, etc) - Each application is studied and simulated in order to define the ideal solution - Microplates screening. CLA is a center of expertise of Mitsubishi robots

SPIROL manufactures several different types of Moulded-In Compression Limiters that are designed to be installed into the plastic assembly during the moulding process. When moulding Compression Limiters into the plastic assembly, the moulding time is increased as the operator or a pick-and-place robot must load each Compression Limiter over the core pin(s) prior to closing the mould cavity. Precise placement of the Moulded-In Compression Limiter over the core pin is required; otherwise mould damage can occur. SPIROL Standard Moulded-In Compression Limiters include: The Series CL500 Moulded-In, Series CL460 Moulded-In - Oval, Series CL600 & CL601 Aluminum and Series CL800 & CL801 Brass.

PENDULUM CHANGER – GOOD FROM EXPERIENCE. The W-axis principle, established by SAMAG since 1995, enables workpiece loading to be carried out parallel to production times. The workpiece carrier table is moved in the swivel drive from 0 – 180°. This means that the next loading and unloading of workpieces can take place during processing. Efficient and useful also for robot-assisted loading.

Robotic plant for the production of prefabricated sandwich panels made up of one or more assembling machines working side by side fed by a robot that loads the produced mesh and the polystyrene sheets that have already been cut. Once assembled, another robot placed at the end of the machine, unloads, stacks and binds the polystyrene panels to be used as main walls, partitions and infill walls of prefabricated and industrial buildings.

REP AUTOMATED SOLUTIONS Automation is adapted to the needs and objectives of each customer. An infinite number of possibilities for the following operations Feeder channels Evacuation Flash and gum cutters Evacuation Spraying of release agent and / or cleaning of the mold Loading of inserts Demoulding of finished parts Visual control of conformity and many others... 3 levels of automation possible o Operator assistance Insert loader o Partial automation Demoulding kit (front, rear top, rear bottom, etc.) o Total automation Robotic cell, brushing on horizontal presses, etc.

TYC 22 Press The French company DubourgelGrange is renowned for the quality of its sanitary product range. The factory has fully automated "REP Tung Yu" machinery equipped with handling units and robots (loading and unloading), which operate in 3 shifts for the major part 7 days a week. These machines are used to produce highend toilet covers and seats made in thermoset resin (ureaformaldehyde).

The spring-applied brakes which are ideally suited for robotics is designed for robotics solutions and loads of up to appr. 20 kg, but it can also be used in other applications requiring small geometrical dimensions. With regard to their power density the slim single-disc brakes are flatter and lighter than the market standard, and due to their large inner diameter they are well suited for hollow-shaft drives. This makes them perfect for applications in lightweight robots with integrated drives. There is a growing demand for safety technology in order to avoid injuries by collisions, especially if the control technology or even the power supply fails. In this case electromagnetic brakes are usually the method of choice. As safety brakes they bring moving masses to a stop, keep loads in position and therefore prevent humans and material assets from being affected.

Dolfin KNV series conveyor belt washing machines are parts washing machines used for washing parts produced in series in large quantities. The parts placed at the entry point are moved towards the exit point of the device by means of the conveyor. The parts guided on the conveyor line are washed with high pressure, pre-washing, washing, rinsing, spraying with passivation liquids. At the end of the cleaning process, these parts are dried with pressurised hot air and discharged at the exit point. If desired, it can be integrated into production processes and robotic loading and unloading options are also available. While the entire device is fully automatic, all washing details are parametric. Cleaning is provided at any desired level by means of spray nozzles specially designed according to the part geometry.

Metzner powder press and indexable insert automations of the "RPA 3-SC series" automatically remove pressed blanks from a powder press and deposit them quickly and gently in a definable sample. In the "RPA 3-SC1", the transfer of the individual sintering plates and the loading of the blanks is carried out by a SCARA 4-axis robot. The empty sintering plates are placed manually into a sintering plate magazine, removed with a sintering plate gripper if necessary, and fed to the loading position. The robot then moves to a gripper station, deposits the sintering plate gripper, picks up a part gripper, and starts loading the sintering plate. In the "RPA 3-SC2", sintering plates are placed manually on a double conveyor belt. One sintering plate at a time is automatically transported to the loading position via the conveyor belt. The robot immediately starts to load the blanks. Loaded sintering plates are ejected from the loading position and manually removed from the conveyor belt.

The compact KDA tunnel units cater for high throughput rates combined with excellent cleaning and drying. They have been designed for the treatment of parts of many different geometries and sizes. The KDA is available with belts of various widths (200/500/650 mm) and a range of features and accessories to cater for many different cleaning tasks. The KDA is available as 1, 2 and 3bath unit. Cleaning with aqueous media (acidic, neutral or alkaline) Spray cleaning unit for wide range of parts High throughput rate Compact, durable design Available as 1, 2 and 3bath unit with loading of the unit via Robot loading Manualm loading Construction side conveyor technology

OM Series Manual Screw Presenters Accommodates wide variety of screw sizes by plugging in interchangeable rails Large Storage Capacity Screw scooping chamber holds up to 300cc Speedy Screw Pickup Radial Indexing escaper function loads three screws in a row for fast and continuous feeding Motor overload stop function; protection circuit for reverse power protection Screw sizes from M2 to M6 Only for use with ferrous screws up to 25mm long (head included) Interchangeable rail allows you to switch screw sizes with ease

The FD-H5 (H) is a compact, high-speed handling robot for small loads. A larger free space in the area of ​​the joint creates a large arm space. Like all robots in the FD series, the H5 model also has collision protection through improved fault detection / elimination. In addition, the integrated hose package guarantees optimal protection against getting caught during the robot operation. The most important technical data: Number of axes: 6 Working range (P-Point): R 866 mm Max. payload capacity: 5 kg Positional repeatability: +/- 0.05 mm Drive System: AC Servo Motor Drive Power: 1440 W

2-axis execution Top mounting Work range: y = 1000 mm, z = 300 mm Payload: to 6 kg For standard applications, VELTRU offers a toploading application ready to use. As all VELTRU applications, the open source PLC program could be adapted to specific customers' needs. For standard applications, the setup and commissioning can be done by interactive GUI only, without any programming. Contact us for more details!

Suitable for a manual operation by operator, Suitable for an automatic cell with a robot load/unload, Suitable for an automatic conveyor production, Wheel presence sensors, Imbalance compensation of a spindle, Ergonomic size of the machine, Sophisticated fluids drain system with reservoir, Spindle protection system from metal chips, Automatic clamping of a wheel hub with a heavy duty pneumatic clamping chuck, Automatic brake and wheel positioning, Fastest balancing cycle time, Fastest tool changeover time, Made of wellknown brands heavy duty components, Servomotor as a spindle drive motor, Software capabilities Valve compensation feature, The best quality, automatic display, Password protection access for operator and shift manager, Any language possible, Industry 4.0 compliant, Static and dynamic imbalance display, Autotest and selfcalibration, Data transfer and communication with master station, CSV file data creation Sophisticated remote diagnostic and support software .

High-throughput production with more than one robot working in line requires a line controller. The VELTRU L10 line controller provides modules to coordinate several robots working on a shared flow or products. The software modules for line control allow to synchronize, centrally visualize and operate multiple robot and other devices. The main features include communication of product information between robots, functionality for load balancing in multi-robot lines and the possibility to access the visualization of different applications on one or multiple screens. The L10 line controller functionality may be installed on a dedicated controller or may be included into the application of one C10 robot motion controller.

The imo-smart is a highly-flexible, versatile rotary transfer system. 4 to 16 machining stations with up to 22 or more spindles ensure fastest setup times. The imo-smart provides you with a ready-to-use machining solution, tailored to your specific requirements and with a wide range of applications. The parts feed is carried out from bar stock, by means of load handling, robot or manually. With a reproducibility of ± 0.003 millimetres, the imo-smart is one of the most precise rotary transfer machines in the world. The imo-smart is designed to be a highly flexible and versatile solution. The excellent accessibility allows adjustments to be made in record time. The 3-axis E-80-CNC unit meets the most common needs: drilling, milling, reaming and tapping. It can be equipped with two spindles and installed horizontally or vertically. This unit can also be used on the imo-compact and the imo-space

On an area of only 9 square metres at a height of 2.30 metres, the imo-compact unites to form a complete, highly-productive rotary transfer system: The imo-compact controls 4 to 8 machining stations with up to 14 spindles per CNC. The parts feed is carried out optionally from bar stock, by means of load handling, robot or manually. The reproducibility of ± 0.003 millimetres makes the imo-compact one of the most precise rotary transfer machines in the world. The imo-compact unites all the elements of a rotary transfer machine. Even the smallest platform offers optimum accessibility. The 3-axis E-97-CNC unit meets the most common needs: drilling, milling, reaming and tapping. It can be equipped with two spindles and installed horizontally or vertically. This unit can also be used on the imo-smart and the imo-space The imo-rot corresponds to the 4th axis: the C-axis

As a system provider of charging and storage technology, we are presenting our inductive fast charging system etaLINK 12000 for the first time on these pages. The solution enables in-process charging of the lithium-ion batteries of driverless transport systems (AGVs / AGVs), industrial trucks (FFZ) and mobile robots. Loading processes can be flexibly integrated into the intralogistic processes. The scalable energy solution is the world’s first contactless battery charging system with an output of 12 kW and an efficiency of 93%. The result is fully automated charging processes and vehicle availability increased by up to 30%.

ROBUS standard machine feeding system is a robotic automation system that reduces labor costs by up to 90% and increases production numbers by up to 60%. The simplicity of Robus' design is reflected in its ease of use. In minutes, you can adapt a new part and switch to unmanned work.

We increase production speed by eliminating waiting times that reduce productivity in machine loading and unloading processes that do not require a high level of expertise. In addition we eliminate HSSE risks such as press feeding.

Packsoft for your packaging robots. With Packsoft you get the best packaging plans for your items. You can customise them in many ways. And it’s also child’s play to export the coordinates of the palletised objects to transfer all the data to your palletising robot’s PLC. The same applies to the packing operations. This makes it easy to control your robots in a reactive, precise and relevant way ! We also have the solution for multi-product loading …