Micro-valve - Import export

3/2-way NO or NC microvalves with various actuation systems. A variety of mechanical or manual actuators can be combined and expanded to 5/2 and 5/3-way functions using a universal adapter.

This micro air valve was developed specially as a small signal element for mounting in confined spaces. Its design allows a big orifice at small overall dimensions. Pre-controlled by an air outlet in the integrated tube nipple it only needs a minimum of actuating force to shut off the pilot port.

SMLD 300G, THE FLEXIBLE ONE With a minimum grid width of 6 mm, the SMLD 300G is very space-saving, while offering maximum flexibility. These micro valves are suitable for a wide range of viscosities and are available in many configurations. Valve holder with integrated heating can also be combined with it. The internal volume is 65 µl. The R (Resistant) type offers crucial benefits in regards of corrosion and the handling of aggressive medias, compared to SMLD 300G, but remains fully compatible in size and function for all SMLD products and components. VALVE COILS The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size. VALVE INSTALLATION Fastening type cylindrical: Grid width with highest resolution, small size. Suitable to our adapter nozzles. The thread fastening is designed to allow an easy exchange of the micro valves. especially suited when the micro valves should be as easy to exchange as possible.

SMLD 300, THE SMALLEST With a minimum grid width of just 4.5 mm (with a special coil package even only 4 mm), the micro valves SMLD 300 are suitable for the tightest of spaces. Low-viscosity media can be dispensed with small flow rates. This type of valve offers a small internal volume of only 25 µl. VALVE COILS The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size. VALVE INSTALLATION Fastening type cylindrical: Grid width with highest resolution, small size. Suitable to our adapter nozzles. The thread fastening is designed to allow an easy exchange of the micro valves. especially suited when the micro valves should be as easy to exchange as possible. The micro valve can be exchanged quickly and without dismantling the entire valve holder and without disconnecting the electric connections.

Pipes for micro-foundation piles complete with micro-valves and couplings for the beam and/or kerb.

• Sizes: Ø 7 mm, Ø 15 mm, Ø 21 mm; • Application: Neutral and mildly aggressive liquids, gases and vapors; • direct actuated; • 2-way valves and 3-way valves, NC; Spider valves are allocated to the micro valve category (outside diameter 7 mm). The anchors installed in the micronized valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. As these valves predominantly featuring cartridge connections have an almost frictionless armature movement, they have a capacity of up to 4 billion actuations, depending upon operation mode. Spider valves may also be triggered via so-called pulse width modulation.

• Seat principle, direct actuated; • Frictionless movement Spider µProp-valves are real proportional valves, in which the armature stroke is proportionally defined by the infinitely-variable current applied. The constant ratio between armature stroke and flow rate thus allows variation of the flow rate by way of the applied current. Spider µProp-valves are like Spider on/off valves microvalves The anchors installed in the micro valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. These valves have a capacity of up to 4 billion actuations, depending upon operation mode.

Plastic RPE solenoid valves are used in many different industries and applications: • Landscape irrigation systems • Household appliances • Hydromassage • Sanitary applications • Water & drink dispensers • Steam Ovens and Steam Irons • Coffee machines • and many more......

-Pneumatic cylinders -Solenoid, Pilot, manual and mechanical operated directional control valves -Flow control valves -ISO and Micro valves -Pneumatic hoses -Air treatment units -Piston operated valves and pulse solenoid valves -One touch plastic - metal - stainless steel fittings -Pneumatic accessories