Packing seals - Import export

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Thermosealing jaw type MS... for hermetic sealing of bags made of aluminium, PP or with cardboard tab. Width of the seal 10 mm ribbed.

Electromagnetic sealing jaw type MS...IP for welding and sealing bags: - From PE - From PP - From soft PVC or polyamide Features: This sealing jaw has: - Adjustable welding time - Adjustable cooling time - Adjustable cycle time The jaw is controlled by an electric foot pedal.

Continuous sealers type SCV and SCH, to seal bags made of PE, PP, soft PVC, polyamide paper, aluminium or cardboard tabs as they pass through the sealer. - Adjustable speed from 0 to 12 m/minute - Temperature adjustable from 0°C to 400°C. - Width of the weld: 10 mm - Maximum weight on conveyor belt: 10 kg - Optional: bag counter - hot stamping on the weld seam

Sealing Pliers designed for welding packaging of all sizes in the barrier material (polypropylene laminated paper and aluminum). Thanks to its small size and limited weight can be used anywhere. The pliers dual hot bar solder is available with a width mm. 300 and mm. 400 , furthermore the welds are repeatable side by side at any length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C using a temperature controller positioned on the plier. Thanks to the coated bars with antiadhesive teflon, it is also possible to weld polyethylene bags of high thickness. (Min 100 my each side - my 250 max each side)

The newly developed CinchSeal®series is applicable for machines in food production, screw conveyors and other bulk material handling equipment, in the pharmaceutical industry as well as in the chemical industry. It is made of 316 stainless steel or other material according to customer requirements. standard features ✔ lower maintenance due to unique self-adjusting design ✔ prevent leaks and material loss and protect gearboxes, bearings and shafts from damage ✔ mounting pattern suitable for standard bearings ✔ handles dry powders, pastes, slurries, and liquids ✔ USDA- and FDA-certified sealing products for use in meat, poultry, and dairy applications ✔ needs 30% less energy than packing seals ✔ temperature ranges -40 °C to 220 °C ✔ designed to accommodate longitudinal expansion and axial runout of the shaft ✔ pressurization with sealing air, 0.3 to 0.6 bar above the pressure of the operating vessel

- Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in carbon steel or AISI 304 - Square section packing seal, compressed between two stainless steel profiles held in place by two aluminum flanges that allow easy access, maintenance and adjustment of the packing, even with the valve installed - Invitation hopper for the passage of the product - Given its compact and robust structure, it is also suitable for heavier applications with materials such as gravel, sand and coal - ATEX certified version upon request - Pneumatic, manual or motorized actuators

Main features • Short mixing time • High mixing quality • Batches with repeatable results • Gentle mixing • Low maintenance Techanical features • Batch size: from 80 to 35.000 liters (net) • Through "U" shaped mixing chamber • MIxing tools: four ribbons, opposed two by two • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door on the top flat cover, complete with sfaty grid and electric block • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Main features • Management of the process time and temperature through the heat exchanger • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen • Heat exchanger on mixing chamber for heating / cooling processes

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Easy deep cleaning Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Full access to mixing chamber through the extractable rotor shaft • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

AUTOMATIC CASE ERECTORS Semi-automatic carton erector for closing the bottom flaps of the box Max. sixe mm. 520x520x700 or mm 670x670x800. The Pack Point is a case erector that, assisted by an operator, automatically folds the four bottom flaps of an American box. In few seconds the carton is ready for the operator to fill: while holding the case, Pack Point allows the operator to use both hands for placing the product into the carton. When the carton is filled, the operator presses a button and the PP automatically transfers the carton into a case sealer for top and bottom sealing. The Pack Point can be linked to a Gem 520/670 (bottom taper) so that boxes can be easily sent to filling lines by motorized conveyors. The machine is equipped with 4 wheels with brakes.

The PANDYNO FPPD vertical inserters allow to an operator to fill and seal the packs avoiding the use of preformed bags. The operator must in fact insert the product to be packaged in the magazine tube, on which a few meters of tubular film have been previously loaded. The product goes down into the tubular film up to the support surface. The operator manually closes the sealing bar by applying a slight pressure on the bar. The welding machine in a single operation carries out the welding of the package, the cutting of the film and the welding of the bottom of the next envelope. This operation takes place using an electromagnetic blocking device. By equipping the bagging machine with several loaders, it is possible to increase the productivity of the machine. To avoid waiting times it is also possible to pre-load different magazine tubes so that they can be quickly replaced once the film is finished. The standard model can be placed on a bench and comes with a charger of your choice.

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction.

Lubricating and sealing off tap cocks, labyrinth seals, stuffing boxes and packings Lubricating and sealing off fittings made of metal, plastic and ceramic, e.g. drain, cold- and hot-water fittings Long-term lubrication of heavily loaded press and guide plates, for example on telescope booms of mobile cranes As a lubricant for of threaded spindles on radiator thermostats Advantages and benefits Reduces wear Extension of the relubrication intervals High resistance to oxidation Noise and vibration-damping Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants Good elastomer and plastic compatibility For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly with a brush, spatula, etc. The paste will also act as a sealant.

USA Made - All R134a sold from this listing is made in the USA. Purchasing USA mado refrigerants guarantee purity standards that will keep your A/C working for a long time. NEW GAS - We purchase our R134a multiple times per year ensuring you get freshly made refrigerant. Old refrigerants can begin to rust if there is any moisture present which is bad for your AC system. SSV CANS - Our cans are equipped with the 50 State compliant self-sealing valve design.Now you can easily store partially used R134a cans! Complies with Section 612 of the EPA Clean Air Act Returns: This item is considered a I lazMat Material and as such is not returnable. It requires hazmat certification to ship. GG Group Thai does not supply a Return label and the seller will not supply return labels for this type of products. Please contact seller for any help you might need in using the product.

USA Made - All R134a sold from this listing is made in the USA. Purchasing USA made refrigerants guarantee purity standards that will keep your A/C working for a long time. NEW GAS - We purchase our R134a multiple times per year ensuring you get freshly made refrigerant. Old refrigerants can begin to rust if there is any moisture present which is bad for your AC system. SSV CANS - Our cans are equipped with the 50 State compliant self-sealing valve design.Now you can easily store partially used R134a cans! Complies with Section 612 of the ERA Clean Air Acteturns: This item is considered a I lazMat Material and as such is not returnable. It requires hazmat certification to ship. GG Group Thai does not supply a Return label and the seller will not supply return labels for this type of products. Please contact seller for any help you might need in using the product.

USA Made - All R134a sold from this listing is made in the USA. Purchasing USA made refrigerants guarantee purity standards that will keep your AlC working for a long time. NEW GAS - We purchase our R134a multiple times per year ensuring you get freshly made refrigerant. Old refrigerants can begin to rust if there is any moisture present which is bad for your AC system. SSV CANS - Our cans are equipped with the 50 State compliant self-sealing valve design.Now you can easily store partially used R134a cans! Complies with Section 612 of the CPA Clean Air Act Returns: This item is considered a I lazMat Material and as such is not returnable. It requires hazmat certification to ship. GG Group Thai does not supply a Return label and the seller will not supply return labels for this type of products. Please contact seller for any help you might need in using the product.

The nozzle consists of two counter-rotating nozzle housings into which the nozzle tubes are inserted with a connection for screw-in round jet nozzles. A special packing sealing system inside the nozzle housings ensures protection during operation and prevents the ingress of contaminants. In front of and behind the nozzle housings are spacers (basket system) to prevent the nozzle tubes from hitting the well wall. In addition, for best cleaning results, the temperature of the medium should be between 3 and 30°C.

The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. A stainless steel bellows and a handwheel extension are available as options (not for operator size 0). —Various valve body connections (threaded sockets, threaded spigots, butt weld spigots) available —High flow rates due to angle seat design —Optionally for contact with foodstuffs as per directive (EC) No. 1935/20041 (K-no. 1935)

The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)

The GEMÜ 549 2/2-way angle seat globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)