Paint and plaster - Import export

TECHNICAL DEFINITION White, matt, ready-to-use thin finishing plaster to level interior substrates. Ideal plaster for renovating uneven or textured substrates. COMPOSITION AND APPEARANCE Water, calcium carbonate, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates: concrete, cellular concrete, cement, breeze, brick, plasterboard, plaster tiles, plaster, old paint, glass canvas, old droplets, glass fibre cloth, old droplets. TECHNICAL PROPERTIES • Density : 1.3 • Dry extract : 66% • Fire classification : A2s1d0 STORAGE 18 months in original unopened packaging away from frost and high temperatures. APPLICATION Manual application : with a trowel or filling knife. Mechanical application : airless spray, spraying machine. In cold weather, mix the product quickly to aid aspiration. We recommend removing the filter from the pump, spraying at about 60 cm from the substrate.

TECHNICAL DEFINITION Ready-to-use surface filler paste for filling interior holes and cracks. COMPOSITION AND APPEARANCE Water, calcium carbonate, sand, resin and various additives. SUITABLE SUBSTRATES All types of interior substrates : concrete, cellular concrete, cement, breeze block, brick, plasterboard, plaster tiles, plaster, old paint. COVERING Primer coat, smooth surface filler, wall coverings, paint REFERENCE DOCUMENTS • Filler meets EN 16566 standard • DTU 59.1 : Paint work TECHNICAL CHARACTERISTICS • Density : 1.5 • Dry extract : 82 % STORAGE 9 months in original unopened packaging away from frost and high temperatures. PREPARATION OF SUBSTRATES Substrates must comply with the DTU 59.1 standard i.e. be dry, clean, dust-free, hard and free of any trace of separating agent. APPLICATION Applied by hand using a filling knife or spatula. The thickness is 2 cm; to fill deeper holes, build up the filler in several steps The maximum thickness will be 1 cm per coat.

TECHNICAL DEFINITION Ready mixed filler for interior and exterior finishing work on walls and ceilings OSCAR is a water based filler giving a finish identical to oil based products. COMPOSITION AND APPEARANCE Resin emulsion containing calcium carbonate, rheological agent and various additives. The resulting paste is white. ACCEPTED SUBSTRATES Interior walls and ceilings • Plasterboard • Old paint • Plaster blocks • Primers Outside walls • Smooth concrete • Fine floated cement SUITABLE SURFACES • Wallpaper • Paint • Wall coverings • Thick plastic covering (RPE) TECHNICAL CHARACTERISTICS • Paste density : 1.9 • Particle size : very fine • pH : 7 APPLICATION Application is manual using a float or a painter’s knife. The maximum thickness will be 1 mm per coat. Smooth and sand if necessary before OSCAR has entirely set. Clean tools with water.

TECHNICAL DEFINITION • White fine grain repair filler for interior and exterior use • Does not shrink • High resin content • FINEX SYSTEM is a multi-purpose filler, which allows to fill holes and cracks, and to repair windowsills and damaged angles ACCEPTED SUBSTRATES Cement, concrete, bricks, concrete blocks, stone, aerated concrete, plaster, old paint, old tiling. SUITABLE SURFACES Once completely dry, FINEX SYSTEM can be covered with all types of paint, watertightness system, plaster- or cement-based fillers, and silicate, epoxy or polyurethane paint. TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard DTU 42.1 • pH : 9 once dry • Setting starts after 50 minutes • Setting ends in 1 hr 10 min PREPARATION OF SURFACES BEFORE APPLICATION The substrate must be clean, dry, free of dust and of any trace of stripping oil. Walls that are peeling off must be scraped beforehand. Strip any old paint in poor condition and remove any old thick plastic covering.

TECHNICAL DEFINITION Multi-propose filler for interior use. • Flling holes, cracks, chases • Fixing and bedding • Pasting polystyrene, roses, cornices • Finishing COMPOSITION AND APPEARANCE Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. Produces a white paste. ACCEPTED SUBSTRATES All types of interior substrates : plasterboards, plaster blocks, concrete blocks, aerated concrete, brick, earthenware, etc. VIDEO 1,5 - 5 - 15 -25 kg bags on wrapped pallet. 12 kg buckets on wrapped pallet. SUITABLE SURFACES Once completely dry, SEMIN FILLER AND SMOOTH FINISH can be covered with any type of paint, plaster-based filler, paste-like filler and wallpaper paste. For tiling, choose an adhesive suited to plaster substrates. DRYING TIME This depends on the weather conditions, on the type of substrate and on the applied thickness. As a general rule, for 1 cm thickness, SEMIN FILLER AND SMOOTH FINISH dries in 6 hours.

DESCRIPTION Coating to quickly fill all sizes of cracks, holes and grooves with no shrinkage and no cracking. COMPOSITION AND APPEARANCE Plaster-based powder filler, calcium carbonate, mineral reducer, cellulose derivatives and various admixtures. The compound obtained is white in colour. SUITABLE SURFACES All types of internal unfinished or painted surfaces : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, terracotta... TECHNICAL CHARACTERISTICS • pH: neutral • Setting time : 30 minutes depending on the ambient conditions and the thickness applied PACKAGING 5 kg and 15 kg bags. APPLICATION To be applied using a coating knife. Amount required : 1 kg m²/mm thickness. DRYING TIME Depends on the ambient conditions, the nature of the surface and the thickness of application. Generally speaking, when spread to a thickness of one cm, the filler dries in 6 hours.

TECHNICAL DEFINITION Extra-fine finishing filler in powder form for all types of interior jobs. The substrate is now ready to be decorated with paint, wallpaper or any wall covering. COMPOSITION AND APPEARANCE Calcium carbonate, redispersible resin, rheological agent and various additives. Produces a white paste. SUITABLE SURFACES • Wallpaper • paint • wall covering • Plasterboards • Concrete • Old paint • Plaster-based high build filler • Plaster blocks • Cement render • Undercoat TECHNICAL CHARACTERISTICS • Setting time : >24hrs (drying filler) • Powder’s density : 0.8 • Grain size : very fine • pH : 7 • Adhesion : complies with standard NFT 30 608 MIXING FACTOR Use approximately 11-12 litres of water for one 25 kg bag. Allow the paste to rest for 15 min before use. APPLICATION Apply either manually with a steel trowel or a putty knife, or mechanically. Allow to harden and scrape off any possible imperfection before sanding down.

TECHNICAL DEFINITION FIBRELASTIC is a ready-to-use filler paste with a high proportion of resin and glass fibre. Particularly suitable for all types of interior and exterior filling jobs. It has permanent flexibility allowing it to tolerate flexing of the substrate without cracking and it eliminates the need for repair tape. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, fibreglass and various additives. The paste is off-white. ACCEPTED SUBSTRATES • Plaster • Masonry • Cellular concrete • Wood • Cement render • Plasterboard • Roughcast • Old painted surfaces • Concrete • Silico-limestone brick SUITABLE SURFACES Once it has dried entirely FIBRELASTIC can be covered with any type of paint or plaster base or ready-to-use fillers. TECHNICAL CHARACTERISTICS • Viscosity (BV 1000 / 30 rpm) : 300000 mPas • Density : 1.3 • pH : 6 • Permanent elasticity PACK SIZE Tubes containing 300 g. Tubs containing 1.5 and 5 kg.

COMPOSITION AND APPEARANCE Plaster-based powder filler, special cements, calcium carbonate, resin, cellulose fibre and various admixtures. The compound obtained is white in colour. TECHNICAL CHARACTERISTICS • Setting time : 30 to 40 minutes • Hardening time : 1 to 2 hours. • Second coating : after 3 hours • Adherence : complies with NFT 30 608 SUITABLE SURFACES All types of interior surfaces complies with DTU 59.1 : plaster, plasterboard, plaster blocks, concrete, cement coating, breeze blocks, cellular concrete, bricks, ceramic, old paintwork, old painted fibreglass, floor tiles, wall tiles, etc. COVERINGS After the filler has completely dried, it can be covered using all types of paints, plaster-based coatings, paste coatings, wallpaper paste. PREPARATION OF SURFACES Surfaces must comply with standard DTU 59.1 and be clean, dry and free from dust and any trace of separating agent. Correctly open up, bevel and dust off the cracks.

PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish.

Gypsum board Primer is a white acrylic water primer with high strength and penetration. It is odorless, environmentally friendly and user friendly. Recommended for priming indoors and outdoors. It is suitable for the preparation of new surfaces painted with plastic and acrylic paints, such as plasterboard, plaster, concrete, bricks, trowel walls

PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish. Information: Emulsion paint based on P.V.A-VEOVA copolymer. Applycating with brush, roller or airless and thinning with 5-10% clean water. The spreading rates are 9-12m²/Lt. on previously prepared surfaces. It drying normally on touch after 1-2 hours and recoatable after 3 hours. Times make different under cold or dump conditions

SPRINT is a gypsum-based machine plaster for one-layer application on interior walls and ceilings in premises with normal humidity. It is intended for making surfaces that are ready for painting, laying wallpaper or proper decorative plasters and finishing skim coats. Application: • Suitable for machine and manual laying application • Perfect for laying on oven and red bricks, cement and lime-sand blocks, roughened concrete Advantages: • Suitable for machine and manual laying • With up to 30% light weight than lime-cement plasters • High smoothness • High level of gypsum maximum elasticity without cracks • Healthy environment that controls moisture TECHNICAL INFORMATION: In compliance with EN 13279-2:2014 : Type B1/50/2 • Paper bag: 30 kg • Mixing Ratio: ~ 18 l water: 30 kg • Coverage: ~ 2.7 m²/ 30 kg • Consumption: ~ 11 kg/m²/10 mm • Bond strength: 0.15 MPa • Bags per pallet: 40 pcs • Pallet weight: 1200kg

SPRINT PLUS is a lightweight gypsum-based machine plaster for one-layer application on interior walls and ceilings in premises with normal humidity. Lighter formula with perlitе ensuring fast laying and economical consumption. Application: • Surfaces that are ready for painting, laying wallpaper or proper decorative plasters and finishing skim coats • Perfect for laying on oven and red bricks, cement and lime-sand blocks, roughened concrete • Suitable for all types of machines for fine plasters Advantages: • If processed with a water scraper, high smoothness is achieved and there is no need for additional skim coating • High content of gypsum for maximum elasticity TECHNICAL INFORMATION: In compliance with EN 13279-2:2014 : Type B4/50/2 • Paper bag: 30 kg • Mixing Ratio: ~ 18 l water: 30 kg • Coverage: ~ 3.5 m²/ 30 kg • Consumption: ~ 8.5 kg/m²/10 mm • Bond strength: 0.15 MPa • Bags per pallet: 40 pcs • Pallet weight: 1200kg

Bossong anchors are embedded into boreholes made in the masonry to be strengthened through drilling machines with diamond bits, that work only with rotation movement in order to avoid vibration and percussion effects on the masonry. Depending on the type of masonry and on the particular setting of the site drilling works can be done with water or air cooling or with techniques that help to avoid the spread of cooling liquids. The choice of the drilling technique is decisive when works are done in unique and precious settings where painting, ancient plasters and stuccoes are present and have to be saved and preserved. The borehole diameter is designed according to anchors size it is usually about three times the steel bar diameter; the length of the anchor is another parameter to be evaluated for the right choice of the borehole diameter.

This water based fireproofing paint provides protection against fire for up to 120 minutes. The paint is intumescent and expands to provide insulation against fire. The paint is brushed on to the surface, where is cures to form an uninterrupted layer. The paint is flame retardant and when in contact with flame, expands due to a chemical reaction, preventing the surface from reaching the critical temperature. The paint is also water resistant but allows for the permeability of water vapour. Thanks to this quality, the surface upon which the paint is applied is able to breathe. The paint may be used on wood, concrete, prefabricated and steel structures to great effect. AREAS OF USE: •All types of plastered, painted and unpainted internal and external surfaces •Concrete, wooden and steel structures •Roofs and fire escapes •All areas that need to be fireproofed •Schools, daycare centres, hospitals, theatre and cinema halls •plasterboard sections and ceilings •Chimneys •Power plants

Field of application: Designed for painting concrete, brick, wood (fiberboard, chipboard), plastered, previously painted and other porous mineral surfaces inside residential and industrial premises with normal humidity. Properties: The paint forms an ideal whiteness, even matte, vapor-permeable coating. Excellent decorative properties, high coverage power and adhesion to the painted surface. Perfectly tinted. Withstands freezing up to - 40 C. Consumption is 140-150 gr./sq.m., depending on the treated surface.

Appearance: viscous liquid of white or slightly yellowish color, without lumps and foreign inclusions, with a particle size of 1-3 microns. Surface film is allowed. Properties: has high binding properties and high adhesion to various materials. Areas of use: Adhesive for a wide range of materials: paper, cardboard, plywood, wood, cotton materials. It is used to create glue for Metlakh and facade tiles, as well as glue for the furniture industry. Widely used: in the packaging, printing industry, as well as in the production of starching agents in household chemicals. It is used for gluing woven, wood, leather products, as well as an additive for finishing fabrics, in the manufacture of fiberglass canvas and fiberglass fiber. PVAD is used as a film-forming agent for painting and art paints, used in the production of plasters and fillers, for interior and exterior works.

Satonat- Satin Finishing Plaster an under paint yerine a last coat finishing plaster with highly adhesive. It can be applied on the plaster surfaces plastered by PERONAT or MAKONAT, or on plasterboard surfaces.

The Mamba series was designed to give the ultimate solution for filling and capping buckets, cups and conical packages in high capacity production. The filling spout is designed according to product and enables filling of wide range of products, such as: paint, plaster, oil , chemicals and more. Thanks to its versatile attribute, the Mamba series is able to fill a wide range of products, from liquids to a very thick or hot products, without any major changes, such as: paint, plaster, oil, chemicals, salads, jam, different powders and much more. It is suitable for a wide range of industries including: food, cosmetic, detergents and chemicals industries. It is available with a variety of stations according to products features and customers needs, such as: Automatic cups or buckets feeder, Various options for the main filling device such as: piston filler or weighing device,Thermo seal unit, Automatic capping and pressing unit, Labeling station.Easy to operate and dismantle

The product is handcrafted. Product dimensions are 29 cm x 30 cm (11.42 inches * 11.81 inches). There are 6 pieces (29cm*30cm) in the package. Product weight single 2 kg, package weight 12 kg 1 package of product covers 0.5 m2 area. Our products are produced from 100% Natural Stone, are easy to lay with a net, and are delivered as a package. Wall Application: Our split face travertine and split face marble products are made entirely of Natural Stone, do not contain any additives and are very easy to apply. Natural stone silicone should be used on wooden surfaces, lightly tapped on the wall on plastered or painted surfaces, black for dark colors and white ceramic adhesive for light colors. Natural Stone varnish or preservative can be used to achieve a more vivid appearance on yellow and rustic colored stones.