Pipeline construction - Import export

Application: pipeline construction

The steel pipes used in the manufacturing of pre-insulated pipes are manufactured longitudinally welded (ERW) or spirally welded (SAW) in accordance with the norms required by the standard TS EN 253 or customer demands. Pipes comprise three basic materials. Carrier pipes are established as steel, copper or plastic based according to the properties of the carried fluids. Casing pipes are manufactured from high density polyethylene (HDPE) raw material, with UV resistance, 100% waterproof and with online corona. PUR ( POLYURETHANE INSULATION MATERIAL) that is injected between the carrier pipe and casing pipe provides heat insulation besides enabling two pipes operating as one pipe by bonding them together.

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

For new constructions, reconstructions, production expansions, we offer comprehensive services in pipeline construction and assembly for the regional food industry, in combination with our special apparatuses construction.

Striping and Peeling of Tube

Drilling of Tubes

Chamfering Tool for Plastic Tubes

Cutting and Sawing of Tubes

Bending Pipes

Pressing Pipes

Pressing Pipes Bending Pipes Striping and Peeling of Tube Brochure Tools for Pipeline Construction Drilling of Tubes Cutting and Sawing of Tubes Chamfering Tool for Plastic Tubes

ASTM 1066 High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-mechanical Controlled Process (A1066 Gr. 50, A 1066 Gr. 60, A 1066 Gr. 65, A 1066 Gr. 70, A 1066 Gr. 80) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class A (L210GA, L 290 GA, L 360 GA) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class B (L245NB, L 415NB, L 245MB, L 555MB, L 360 QB, L 555 QB) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL1 Gr.A (L210) – X 70 (L485) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL2 Gr.BN (L245N) – X 60N (L415N) Gr.BQ (L245Q) – X 56Q (L390Q) X60Q(L415Q) – X80 Q (L555Q) Gr. BM (L245M) – X80M (555M) X90M (L 625M), X100M (L690M)

Combination of welding outlet and flange Nipoflange in pipeline construction A nipoflange is used in pipeline construction just like a welding outlet or a nipple outlet for a 90 ° branch. A Nipoflange is a combination of welding outlet, nipple outlet and flange. Further terms for Nipoflange are Weldoflange or Flangeolet. Two different branch sides On the pipe branch side , a nipo length has the shape of a welding outlet. This means that the branch from the pipe is made with a welded joint. There is a flange on the connection side, ie a flange connection is created. The flange can be designed according to customer requirements (usually according to DIN or ANSI). Nipoflange as a forged fitting A nipoflange (similar to ANSI B 16.9 / MSS-SP 97) is usually made from a forged blank. This means that a Nipoflange is a forged fitting and has no welds.

Swept outlet similar to ANSI B 16.19 / ANSI B 36.10 Swept outlets in pipeline construction A swept outlet is used in pipeline construction just like a welding outlet, a socket welded outlet or a threaded outlet for a 90 ° branch. A swept outlet is an alternative to the T-piece / red. In comparison to the T-piece / Red.Tee, the installation effort for a swept outlet is lower because only one hole has to be drilled into a pipe. The swept outlet can then be welded into this hole. A swept outlet differs from a welding outlet in the type of welding. While a welding outlet is only placed on the run pipe and then welded, a swept outlet is welded directly into the run pipe. Ideal stress distribution Swept outlets were developed in order to achieve the best possible stress distribution for internal pressure and pipe forces. Due to the favorable voltage level, swept outlets are often used in highly stressed pipes in the oil and gas industry.

Crossing of traffic routes and waterways in pipeline construction HDD Assist & Rescue Installation of protection pipes Dynamic pipe bursting Vertical applications Construction of circular support structures for tunnelling Tree relocation

Special equipment, production aid, pipeline construction, assembly In a dynamic market environment, new constructions, modifications, production expansions and the potential for process optimization not fully exploited, represent constant challenges, even in the food industry. The experts at KASAG support and accompany you in all your investment and maintenance projects in the food technology with design, engineering, manufacturing, pipeline construction and assembly. In addition, you will have access to KASAG’s knowhow in the areas of energy recovery (renewable energy) and pressure vessel construction. With KASAG as your partner, you can count on specialists on location.

We manufacture ready-to-install standard and special flat gaskets in large and small series. Depending on the area of application, different materials are used. Flat gaskets are mostly static and are mainly installed between two flanges in apparatus and pipeline construction. Depending on the quantity and size, the most economical manufacturing process is used.

The function of gaskets is to prevent the leakage of medium outside the equipment. Static seals are used in many applications such as plumbing and heating systems, sealing fasteners, containers and pipeline construction. They are washers, rings or frames which generally are adapted to the whole width of the sealing surface. They can be used for example in flange connections of pipelines, pumps, motors, valves, etc. The gaskets are made of various materials such as: Rubbers, fiber plates, synthetic plates, graphite, PTFE, etc.

WIDE RANGE OF TANK ACCESSORIES FOR TECHNICAL EQUIPMENT Whether grain silos, biogas systems or liquid manure containers, Lipp places the greatest importance on quality, safety, a long service life and cost efficiency over its entire product portfolio – including accessories. The whole is more than the sum of its parts. That is especially true for Lipp container solutions and systems as special attention is paid to all parts – including tank accessories – to ensure quality, safety, longevity and cost efficiency. A broad range of technical tank accessories is available for all containers. Some are produced in house and some are purchased via partners or carefully selected suppliers with whom Lipp has established long term relationships based on trust. ACCESSORIES Container bottoms Container insulation Pumping and stirring technology Overflow gutters Container heating Steps, platforms and operating bridges Overpressure and underpressure protection devices Pipeline construction

PATENTED DIGESTER WITH INTEGRATED GAS ACCUMULATOR LIPP KomBio Reactor for industry and local authorities The innovative and outstandingly economical solution for energy production at biogas plants and stabilisation of sewage sludge has been in use in many countries for over twenty years. Quick realisation, low investment costs, high operating safety and long service life are all characteristics that speak for themselves. The system is suitable for small and large plants and complies with industry standards. KEY BENEFITS Production of renewable energy and reduction of fossil CO2 emissions Low noise emissions Flexibility with regard to substrate composition Compact and space saving with minimal pipeline construction High functional safety Steel roof (can be insulated) to protect against the weather Individually customisable for intended application Good insulation reduces heating demand Patented stirring systems Fast construction with production on site Low investment costs

We can supply pipes for the construction of pipelines, equipment and tanks subject to low temperatures as Seamless or welded pipes, hot rolled or cold finished. Pipe norms suitable for low temperatures are according to; ASTM A 333 / ASME SA 333 (seamless and welded pipes) EN 10216-4 (Seamless pipes) EN 10217-4 (Welded pipes)

Applications Pipes for the construction of pipelines for water, liquid hydrocarbons, natural gas and for the construstion of chemical and industrial plants, refineries etc. Norms Line pipes are according to the following norms: API 5L (ISO3183) (seamless and welded pipes) ASTM A53 / ASME SA53 (seamless and welded pipes) Manufacturing methods Seamless pipes, hot rolled or cold finished with following heat treatment: ERW pipes up to dia 24" and SAW pipes for the other sizes.

lastic and strong adhesive and sealant on polyurethane (PUR) basis. For bondings and sealings on metals, many plastics, ceramic, wood, glass, stone, etc.. Applications: Tank and apparatus construction, Car body, freight container and vehicle construction, Ventilation and air conditioning, Pipeline and fittings construction, Energy and electrical industry, Insulating technology and in many areas of plastic technology and wherever silicone is not suitable. Properties: Can be painted over and sanded after curing, Odourless curing, Resistant to weathering and UV, Excellent aging resistance, Resistant to fresh water and saltwater, Stable, pasty and Silicone-free. A better adhesion is achieved by using suitable WEICON adhesion agents. With suitable paint coating systems (except alkyd resin paints). Available in white, grey and black.

During the Nord Stream 2 project several Aerolift lifting solutions were used on multiple locations. It is world’s largest pipeline project. During the project, a pipeline is laid through the Baltic Sea, which will transport natural gas over 1,200 km. From the world’s largest gas reserves in Russia via the most efficient route to consumers in Europe. Over 200.000 pipe segments needed to be handled. Almost all handling movements are carried out by an Aerolift lifting solution!

The Aerolift pipe lifting solutions are applied for many different situations and places. During production, storage, transhipment, and internal transport. For this specific situation we designed a lifting solution to handle bare and coated pipes aboard the ship. The ship, The Amazon, was converted to an ultra-deepwater J-Lay vessel. Our vacuum lifting devices are installed on 4 cargo hold cranes. In tandem mode the cranes will be used to load and unload 24-meter-long pipes in a cargo. The lifting devices are designed to limit deflection of double joint pipes or to handle the entire pipe by vacuum only.

Forged components for nuclear reactors, boiler systems, piping Valves are pivotal in various industrial contexts. Forged parts designed for nuclear reactors, boiler assemblies, pipeline construction, and safety valves are crucial elements in various industrial applications. Safety valves, typically pressure relief valves, stand out as paramount safety features within most systems. Their primary function is to safeguard pressurized vessels like steam boilers, reactor vessels, and pipelines from potentially hazardous pressure surges. In the event, that pressure exceeds safe limits, these valves release trapped gases, vapors, or liquids either into the atmosphere or into designated manifold systems. The West German drop forge KB Schmiedetechnik GmbH in Hagen (NRW) boasts decades of proficiency in crafting drop-forged components tailored for pressure applications compliant with the Pressure Equipment Directive (PED) and for nuclear facilities adhering to KTA, AVSD, and RCCM standards.

Looking for handling equipment for your pipeline project? Use the Aerolift pipe handling equipment. Our custom-made lifting solutions are used for every part of the lifting process of line pipes. During production, storage, internal transport, transhipment, construction of the pipelines and even offshore. Improve the safe work environment Pipe lifting is often done by slings or hooks. Both methods which require manual attachment and detachment. This is no problem on ground level, but what if the line pipes are stacked up to several meters high? Someone must climb the stack, which is a very dangerous situation with great risk to life and limb. All Aerolift pipe handling equipment is designed to rule out this risk. Improving the safety of the work environment tremendously. However, this is not the only benefit. Most Aerolift lifting solutions are based on vacuum lifting technology. In our opining is vacuum handling the best lifting method there is.

A blind flange is a solid disk used to block off a pipeline or to create a stop. Similar to a regular flange, a blind flange has mounting holes around the perimeter and the gasket sealing rings are machined into the mating surface. The difference is that a blind flange has no opening for fluids to pass through. Instead,You can place in between two open flanges, which stops the flow through a pipe. Many times use this type of blockade when adding another line onto an existing pipeline or when added a new valve Without a blind flange, it would be next to impossible to repair or perform ongoing maintenance to a pipeline unless the flow was shut off at a earlier valve, which could affect miles of pipeline. The use of flanged pipe has significantly sped up the process for constructing pipelines. It has also made the task of repair and sectional replacement easier.

Tunnel Mold, Wall and Ceiling Case Boxes (Halogen Free)