Plug connectors - Import export

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

10 meter mains connection cable for the AC connection of the module inverter. With this 10 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Schuko plug. Simply DIY. Just plug in.

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -20 to +120 °C - Working pressure range: -0.95 to 16 bar - cooling water, air, vacuum

- Metric thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Seals NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, not designed for steady motion of the tube - Not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling - but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - swiveling, but not designed for steady motion of the tube

- Metric thread- With hexagon socket - Chambered O-ring - Seals FKM - Material 1.4301 / 1.4307 - Temperature range: -20 to +120 °C - Pressure range: -0,95 to 16 bar - Media: Air, vacuum and liquids

- Thread metric - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Short design (throttle)- Adjusting screw with knurl - Fine adjustment with a noticeable click - Whitworth pipe thread - Seal in connection FPM - Material: brass nickel-plated - Type: Cone-type throttle - Allowable medium: Air, Oil - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0,95 to 16 bar)

The LogTag UTRIX-16 Temperature Logger with USB connector is specifically for monitoring temperature during transport and storage. The datalogger has a measuring range of -25°C to +70°C and is equipped with a USB connector. Plug the USB connector into the computer and a fully detailed PDF report can be generated.

Field-wireable connectors are available in sizes M8 × 1/Ø 8 mm, M12 × 1, 1/2", 7/8", M16 × 0.75, M23 × 1 and also as valve plug. The connectors make installation easier in applications in which it is difficult to estimate the needed cable length.

Superbright bipolar red, yellow and green LEDs assemblies with resitor for 120VAC or 240VAC. Plastic housing or rugged screw on metal housing-all available with IP66 sealing. Custom wire leads,plug, connectors options available by verco electromechanical components. mounting holes 7,93 mm or 12,70 mm

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Jab-in cover allow easy connection without need cover removal. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

4 or 5-pin socket Straight or angled Connection with screw clamps Plastic housing

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Ceramic housing with contacts of original thermocouple materials and 
spring-loaded sockets for reliable contact . • Reverse polarity protection by different contact pin widths. • Oversize screw head for easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide.

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. The third contact for ground or continuous shield or for three wire RTD´s. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

5 meter mains connection cable for the AC connection of the module inverter. With this 5 meter connection cable, the inverter can be connected to the house network. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Schuko plug. Simply DIY. Just plug in.

15 meter mains connection cable for the AC connection of the module inverter. The inverter can be connected to the house network with this 15 meter connection cable. Just electricity. At one end of the cable with fitted Betteri mains connection socket - at the other end of the cable with Schuko plug. Simply DIY. Just plug in.

NSPV PV4.0 Solar fuse connector 1000VDC female cable end Features: Imported PPE insulation material; IP67 degree of protection; Matching with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; Current reaching 30A. P.S.:Recommended that the Max ambient temperature is 75℃，and not exceed 8 hours in 75-85℃. P.P.S.: Prices excluding fuse and cable.