Position indicator - Import export

Housing polyamide 6. Hollow shaft steel. Screen plastic. Grub screw steel. Version Impactresistant housing. Hollow shaft black oxidised. Grub screw black. Dial black, digits white. Note Position indicators allow direct reading of input measurement values at a glance. In addition, the value indicated per spindle rotation (corresponding spindle pitch) can be selected and the various indicator values are realised by a transmission gear. The position indicators are distinguished by their small construction with very clear display. They are especially suitable for small spindle distances and small shaft diameters and have a torque support that is positioned in a hole on the side. ** At the 1st asterisk give assembly position and at the 2nd asterisk give the count direction (see sample order “assembly position, count direction”). Technical data – Counter consisting of 3 10position dials – Height of figures about 4 mm – Hollow shaft Ø 10 H7 mm

The Type 2040 an visual and electronic position indicator for mounting on pneumatic valves with linear or rotary actuator is characterized by a compact design, the possibility to identify the valve position via switch contacts. The various configurations and diagnostic function can be managed via the standard Schubert & Salzer PC Software "DeciveConfig".

Body and rotary table Al alloy, anodised. Spindle steel, casehardened. Spindle bearing maintenancefree. Position indicator plastic. Version Radial play of rotation axis < 0.015 mm. Axial play of rotation axis < 0.02 mm. Repeat accuracy < 0.05°. Spindle selflocking. Note 360° adjustment with no end stop. The position indicator displays in 0.1° increments clockwise. The angle of rotation is indicated directly on the large LCD display. The rotary stage rotates anticlockwise. Reset, chain dimension and offset settings can be made via the keypad. 2 years battery life. The battery is quick and easy to replace. The mounting position of the position indicator is set in 4 positions using one screw. Transmission ratio 211611008 = 501 211611012 = 551 211611025 = 501 The modular design enables the rotary stage to be easily combined with other items of the same size. Drawing reference Assembly position of position indicator a) top (standard) b) right c) bottom

The GEMÜ 1235 electrical position indicator is suitable for mounting to pneumatically operated linear actuators. The position of the valve spindle is electronically detected and evaluated through play-free and non-positive mounting. Intelligent microprocessor controlled functions make commissioning and support during operation easier. The current position of the valve is displayed via high-visibility LEDs and fed back via electrical signals. The GEMÜ 1235 has been specially designed for valves of small, medium and large nominal sizes with a stroke of 2.2 to 74.4 mm. — Communication and programming interface IO-Link — Adjustable switch point tolerances — Speed-AP function for fast mounting and initialisation — High visibility position indicator by LED — Can be fitted to GEMÜ valves or third-party actuators — On-site or remote end position programming via programming input

Due to the space-saving enclosures and the high protection class the position switches of the M49 series are perfect for an installation where a flat design and a high protection class of IP67 is required. — Flat and compact design — Pre-installed connecting cable (1m length) for quick and easy installation — Top-mounting versions available — Cable outlet on the side or at the bottom — High protection class IP67 — Suitable for safety applications according to DIN EN 60947-5-1 (positive break) — Different cable lengths available on request

With very slim dimensions and overall IP67 protection, the I49 switches are a perfect solution for either position indication or safety applications. — Flat design — Highly flexible deployment — Reliability — Simple and quick installation — Compact IP67 switch for safety applications

Position indicator, 1:1 rotation, mechanical. Especially suitable for ball valves (1/4 u) and rotary disc clamps (1/2 u)

Position indicator for telescopic spindle extension, electric, aluminium (13 – 1390 U/Stroke)

Mechanical position indicator out of plastic for telescopic spindle extensions (max. 81 U/Stroke)

Position indicator for telescopic spindle extension, mechanical, aluminium (13 – 1390 U/Stroke)

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading poisition. Freely programmable directly via buttons on the device. Hollow shaft, max. Ø 30 mm. Stainless-steel hollow shaft. LCD display with 6 digits and special characters. Digit height approx. 11 mm. Long battery life. Easily replaceable batteries (standard AAA). Incremental measurement function, absolute value display. High degree of protection.

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position. Freely programmable electronic digital display for length or angular measurement. Freely programmable via the ProToolDE programming software. Hollow shaft, max. Ø 30 mm. LCD display with 5 digits and special characters. Digit height approx. 12 mm. Reset, incremental measurement, offset via keyboard. Long battery life. Easy battery change without dismantling of the device.

Freely programmable and purely battery-operated position indicator. Offers highest flexibility since the same basic device can be configured application-specifically regarding spindle pitch, display accuracy and reading position. Freely programmable electronic digital display for length or angular measurement. Freely programmable via the ProToolDE programming software. Hollow shaft, max. Ø 14 mm. LCD display with 5 digits and special characters. Digit height approx. 8 mm. Reset, incremental measurement, offset via keyboard. Long battery life. Easy battery change without dismantling of the device.

Designed for large diameters. Hollow shaft, max. Ø 30 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof.

Extremely sturdy design in a metal housing. Hollow shaft, max. Ø 35 mm. Counter with 4 or 5 decades. With zeroing function. Clamp lever integrated in the design. Stainless-steel driving shaft as an option. Reversible counting direction.

Ultra-small design. Hollow shaft with max. Ø of 10 mm. Minimum axle base of 19 mm. Counter can be designed for “mm” or “inch”. Stainless-steel driving shaft as an option.

The AP05 position indicator guides the user intuitively to the correct machine setting in the case of product or format change. The optimized backlit display indicates target values and actual values straight to the point. Two LEDs show the machine operator precisely the direction whereto the adjustment is to be performed.The AP05 helps avoid wrong machine settings and enhances process safety of flexible production machines.  Electronic position indicator with bus interface. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. User guidance through status LEDs. Hollow shaft with  Ø 20 mm and clamping ring made of stainless steel. Enhanced shock resistance owing to protective display glass. Integrated RS485 interface, CAN bus as an option. Robust sensor technology unit thanks to magnetic scanning. Mechanically compatible with the AP04 and DA04 position indicators. IP53 type of protection, IP65 as an option.

The bus-compatible AP10 position indicator serves for monitored format adjustment in order to reduce setup times and enhance machine efficiency.Readability has been optimized to achieve intuitive user guidance. The backlit display clearly indicates target and actual values  two-row position indicator for representing target and actual values and the two LEDs clearly show the direction to be set.  Electronic position indicator with bus interface. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus or IO-Link as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S position indicator. IP53 type of protection, IP65 as an option.

Most-used size in slim design. Hollow shaft, max. Ø 20 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual iinear or slider adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Electronic position indicator with plug connection for magnetic sensor. Integrated Industrial-Ethernet-Fieldbus. Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Display accuracy up to 0.01 mm. Absolute function via internal backup. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. IP53 type of protection, IP65 as an option.

Absolute indicator with Industrial Ethernet interface which enables process-capable and intuitive positioning for manual machine adjustments. The display and evaluation of target and actual values ensures monitored format adjustment. Integrated Industrial-Ethernet-Fieldbus.Backlit two-row LCD. Display of target and actual value displays with integrated alignment. Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option. Robust sensor technology unit thanks to magnetic scanning. User guidance through status LEDs. Mechanically compatible with the DA09S and AP10 position indicators. IP53 type of protection, IP65 as an option

Combined analog-digital position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Counter with 5 decades. Special scales, also for small numbers of pieces. Dustproof or oil-filled versions.

Bus-compatible position indicator with two-row LCD display for indicating target and actual values. With  additional status LED for clear indication of the positioning status. Serves for monitored format adjustment aiming at reducing setup times and increasing machine efficiency. Electronic position indicator with plug connection for magnetic sensor. Optimally readable backlit display. Two-line LCD for target and actual values. Reset, incremental measurement, offset via keyboard. Integrated RS485 interface, CAN bus as an option. Display accuracy up to 0.01 mm. Absolute function via internal backup. User guidance via bicolor status LEDs. IP53 type of protection, IP65 as an option.

Hollow shaft, max. Ø 14 mm. Counter with 4 decades and fine reading. Detent as an option. Magnifying function for good readability. Stainless-steel driving shaft as an option. Axial seal, dustproof and splash-proof. Clamping plate (see accessories).

Robust design in a metal housing. Hollow shaft, max. Ø 20 mm. Counter with 5 decades and fine reading. Display can be designed for “mm” or “inch”. Attenuated counter system. Fine setting for correction of dimensions. Reversible counting direction.

Version with two counters (4 or 5 decades) and fine reading. Predestined for use with wood milling machines. Hollow shaft, max. Ø 30 mm. Display can be designed for “mm” or “inch”.

Analog position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Wide range of gear ratios. Special scales, also for small numbers of pieces. Dustproof, oil-filled or waterproof versions.

Analog position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Wide range of gear ratios. Special scales, also for small numbers of pieces. Dustproof, oil-filled or waterproof versions.

Analog position indicator. Measured value acquisition based on the gravity principle. High stability thanks to doubly supported pointer shaft. Very robust, glass-fiber reinforced plastic housing. Wide range of gear ratios. Special scales, also for small numbers of pieces. Dustproof, oil-filled or waterproof versions.