Putty - Import export

Easy to sand light polyester putty Very smooth finish Pinhole-free due to self-leveling ability Ideal for spot and smart repair No finishing putty needed afterward  Universal adhesion  Much lower viscosity compared to GAP 30

*Convenient for coat applications or as finishing coat for gypsum boards joints, angles and fasteners head. *Easy applicable by hands or mechanical materials *Perfect surface for painting *Net weight: 17 Liter *Color: white powder *Drying time: 12-24 hours (depending on temperature and humidity

APPLICATIONS For the reconstitution of insulation for low voltage joints. For permanent waterproofing of low and medium voltage taped joints. For preventing leaks of resin during injection in low and medium voltage taped joints. PRODUCT BENEFITS Interleaving overlaps the edges of the coil, allowing easy separation from the tape. Service temperature ‐30 to +80°C. Particularly suitable for hot climates. Good compatibility with all resins used to protect joints. Resistant to water and ozone. Good physical properties, which show a high degree of stability under conditions of use.

Our product range provides solutions for a wide range of applications. Our sealing compounds and adhesives are mainly used within the high temperature range. All wezi-lit products distinguish themselves by their high quality and excellent processing properties. They are characterised by a special recipe that adapts them to the specific needs of the required application whether it is elastic or highstrength, heatresistant or fireproof, or free of asbestos and fibres. We can also customise desired processing properties such as viscosity and longterm storage. If required, we produce the water glass based sealant separationfree, so that no sedimentation occurs during a container's storage.

[Product Description] Premium Putty is dental impression materials. Impression materials are used to copy the teeth and surrounding oral structures by creating a dental impression poured with dental plaster to fabricate a dental cast. This procedure provides a tridimensional and accurate mouth replica, allowing dental work even in the absence of the patient. [Product Features] - Soft type putty that it makes it easy to mix. - Dimensional stability - Remarkable tear strength - Excellent recovery after deformation - Creating excellent detail reproduction [Product Standard] - 280㎖×2 jars (280㎖ Base, 280㎖ Catalyst) - Two option (Normal / Fast) [Product Use] Impression materials are used to copy the teeth and surrounding oral structures by creating a dental impression poured with dental plaster to fabricate a dental cast. [Company Information] Handae Chemical Website : http://www.handae.co.kr

Description Dental putty product having a regular setting time. A tray material. A dental impression material to be mixed with bare hands. Type 0 (ISO4823) Very high consistency. Features Not sticky. Its viscosity is suitable for mixing it with bare hands. Patient does not feel any repulsion because it has no taste and odor. After hardened, very hard to minimize negative deformation during impression. High affinity with plaster enables detailed modeling. Oil does not ooze during mixing with bare hands Dissimilar to putties of other manufacturers.

Filling compound such as epoxy resin filler (“epoxy putty”), fine filler or repair putty are used for corrosion protection, repairing scratches and unevenness in metal, wood and fibreglass-reinforced plastics. These coatings are mainly used in boat building.

TECHNICAL SPRAYS

POLYESTER PUTTIES

POLYESTER PUTTIES

POLYESTER PUTTIES

Inorganic mineral paint based on Lime putty. for the decoration and protection of both new and old exterior and interior surfaces based on lime and cement, lime and chalk, lime, dehumidifiers plasters, stucco walls and Concrete. High resistance to atmospheric agents, excellent breathability, ideal finish for dehumidifiers, very high resistance over time, good expansion and adhesion to the support, excellent anti-mould features. Classic period decoration with a nuved, opaque effect. Due to its composition, it offers the highest guarantees of inalterability and protection, as well as resistance to heat, cold, sun, rain and air pollution.

Suitable for universally usable refurbishment wax for mending surface damages and small defects in varnished, oiled or glazed wood surfaces indoors, such as doors and furniture, wall panels and wood parts.

Suitable for initial filling of parquet and wooden floors, as well closing seams. Woody Putty Solution is usable as a binding agent for wood flour or sander dust that is to be free of lacquer and wax. Our product binds and adheres well after a short drying period. After drying it is very sturdy and easy to sand. Can be painted over with all suitable products.

For the repair of all types of pipes, such as copper steel PVC, etc. Concentric or two separate components.

Hemp fibre and plumbing putty for threaded joints

fako® Sealing putty 3765, made of butylrubber, has been developed as a supplement to the fako® Sealing strip 3714, for most sealing purposes where absolute resistance to ageing is required and for which an intermediate layer of 0.8 mm to 1 mm has to be used. In combination with the Sealing strip 3714 most desired thickness’s can be obtained for seals. The putty does not become hard but remains plastic and elastic. To fulfil its requirements the putty has not only to be elastic but also plastic so that, when pressed, it will penetrate into any gaps and remain, thus forming a complete seal. Technically this is only possible through a combination of two basic materials with the same chemical composition but with different molecular weights. With two components the above requirement is met for both sufficient penetration depth and stability of the kit at the same time. By simple filling with a putty knife, you can obtain a min. thickness of approx. 0.2 to 0.3 mm. Priming is not required.

Durable protection for your glass or ceramic surfaces such as wash basins, showers, bath tubs, windows, glass facades, mirrors, winter gardens, glazed tiles etc. Cleaning is significantly simplified. Substances from environmental pollution,, lime and dirt can be easily removed without using aggressive chemical cleaners. Features easy application hydrophobic dirt-repellent no change in look Consumption 5-10 ml per m2 Quantity 250 pieces 500 pieces 1.000 pieces 2.500 pieces 5.000 pieces 10.000 pieces Price on request Delivery time: Approx. 8-14 work days after print approval Other container sizes and quantities on request