Cabling - Import export

Power cable with copper cores, PVC insulation, inner PVC covering, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tape, zinc-coated steel tapes.Application: PVC -insulated power cables are used for the electricity transmission and distribution in the fixed installations for operating at a nominal alternating voltage of 0,66; 1;3 and 6 kV and nominal freqiency 50Hz. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured

Copper wire rod has high technological characteristics. It is used for the production of cables and wires, electrical products. Oxygen -free copper wire rod is used for the production of a wire without breakages and at higher velocity. It can reduce the production cost.

Copper wire rod has high technological characteristics. It is used for the production of cables and wires, electrical products. Oxygen -free copper wire rod is used for the production of a wire without breakages and at higher velocity. It can reduce the production cost.

Copper busbars are produced of electrical copper. The products are convenient in use, practical and durable. Copper busbars have high bandwidth and don't require additional service. The life cycle of the copper busbar is longer than the cable's one. The installation of the copper busbar is easier.

Building wires with copper cores, PVC insulation/ polymer halogen free composition, inner PVC/ polymer halogen free composition covering, sheath.Application: building wires are used for the installation of power equipment, mechanisms and machinery, power lines of the domestic uses. PVC -insulated/ halogen free/ fire resistant/ flame retardant/ cold resistant/ low smoke/ low smoke and toxic fumes/ shielded

Power cable with copper cores, XLPE insulation, PVC or polymer halogen free composition sheathed power cable, shield: copper foil, tape or braids, armour: zinc-coated steel wire, aluminium tape, zinc-coated steel tapes.Application: these cables are suitable for indoor and outdoor installation, in air and ground, where the cables should be flame retardant and halogen free. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free

Power cable with copper cores, EPR insulation, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tapes, zinc-coated steel tapes, aluminium wires.Application: these cables can be used indoor or outdoor, and in the air and in the ground. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free)

Halogen free power cable with copper cores, polymer halogen free composition insulation, inner polymer halogen free composition covering,polymer halogen free composition sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tape, zinc-coated steel tapes Application: Cables are used in the public places ( kindergardens, schools, hospitals, malls and etc.) where the fire is the main treat because of the toxic fumes and the thick smoke which can make it difficuilt to evacuate the people. Fire resistant/flame-retardant/shielded/armoured)

Control cable with copper cores, PVC insulation/ polymer halogen free composition, inner PVC, polymer halogen free composition covering, PVC sheath, shield: copper foil or tapes, aluminium foil, armour: zinc-coated steel wieres, zinc-coated steel tapes.Application: control cables are used indoor or outdoor, and in the ground. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured

Flexible cable with copper cores, PVC insulation/TPE insulation/EPR insulation/ polymer halogen free composition, inner PVC/TPE insulation/EPR insulation/ polymer halogen free composition covering, PVC sheath, shield: copper foil or wires, armour: zinc-coated steel braids, zinc-coated steel tapes.Application: flexible cables are used for the connection of movable machines and appliances, machinery and equipment to the electric grid for laying in the cable installations and industrial premises. TPE- insulated/PVC-insulated/ EPR- insulated/halogen free/ fire resisitant/ flame-retardant/ cold resistant/low smoke/ low smoke and toxic fumes/ shielded

It is applied for laying trunk and subscribers cable lines indoor. Its specific feature is round design and aesthetic appearance. Cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall.

Designed specifically for servicemen of telecommunications companies. The product consists of four compartments: In the first large compartment there are compartments in which the following items can be placed: laptop, charger, folder, with documents, cables. In the second middle compartment there is a pouch with tools. In the pouch, you can place: connector crimping tool, flat, cross-head screwdrivers, stationery knife, wire cutters, a hammer, pliers, electrical tape/zip ties, RG45 connectors, Scotchloks. In the third middle compartment there is a pouch with compartments for items: measuring device, organizer with consumables, test tube, Tone Generator, Multimeter. The fourth small compartment can include: splitters, RJ45/RJ11 sockets, stock of Scotchlocks, stock of clamps, The backpack is designed specifically for servicemen of telecommunications companies.

It is applied for laying trunk and subscribers cable lines indoor. Its specific feature is round design and aesthetic appearance. Cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall.

It is applied in private houses during installation of PON networks. The cabinet has 4 slots for placement – removable panel for optical crosses or optical divider cassette type (130x100x25 mm). In addition, the cabinet can accommodate up to 3 ku-1 cassettes for optical fiber welded joints.

Designed for installation in hallways and staircases. Is used for PON networks in apartment buildings. The cabinet can accommodate: – a removable panel for optical terminal boxes or an optical cassette type PLC splitter (130x100x25 mm). – box-type optical coupler (90*20*10) – 2 pcs. – 4 optical adapters SC type. No FOCL welding is required. Up to 8 pcs. of cable slack max 30 cm.

Fastening unit is applied as an anchoring and supporting fastener in private houses during installation of the trunk and subscriber optical fibre transmission lines. Installation: The part is fastened to the support with the mounting band (2 pcs.)

The patch cord is designed for indoor installation during connection of the subscribers. Description: Optical patch cord made of DROP cable for indoor application. White cable jacket is resistant to temperature drops. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation -Aesthetics 1SM SC/APC-SC/APC 5m/10m/15m

Optical patch cord made of DROP cable for outdoor application. Black cable jacket is resistant to temperature drops. Cable lengths are made according to customer's request. Network construction using patch-cords: - Quick and easy installation - Minimum welding - High connection speed - Easy operation - Aesthetics

Semicircular metal duct is used to protect cable lines running both inside and outside buildings. Mounting to the wall is carried out using dowel nails or a mounting gun. Installation: It is fixed to the wall using dowel nails or powder-actuated fastening tool.

Metal triangular duct is applied to protect cable lines both indoors and outdoors. Installation: it is fixed to the wall using dowel nails or powder-actuated fastening tool.

Cable tray Unicor applied for laying trunk and subscribers cable lines. Its specific feature is absence of the cover, cable lines are laid via the duct slot. The cable tray has technological parts for fixing it to the wall. The cable tray has the Fire Safety Certificate.

It is applied as an anchor fastening for trunk and subscriber lines, providing offset up to 150 mm between the fixing point of the optical fibre transmission line and the support body. This fastening unit can be fitted with the "installation bracket for the optical distribution cabinet with 150 mm offset (on SV support)" for further placement of the distribution optical cabinet.

Is used for backbone and subscriber FOCL supports as a loop fastening for vertical and horizontal cable installation along the support. Replacement of UK-P-(Sh)

Is used for backbone FOCL supports as a supplemental fastening. This mount is sliding, which can significantly accelerate the installation of a cable line. This mount is multi-purpose and does not depend on cable diameter.

Is used for backbone and subscriber FOCL supports as a bracket for an optical distribution box type SNR-FTTH-FDB-24A. This bracket allows storing a cable slack in a coil Ø350 mm in the space between the bracket and the support body.

Is used for backbone and subscriber FOCLs as an addition to UK-N/U Multi Mounting Unit 150mm extension (for reinforced-concrete supports) when a FOC needs to be mounted on a support. Provides 150 mm FOC projection from the support.

It is applied as anchor fastening for trunk and subscriber optical fibre transmission lines

SC/APC type PON connector

Cable TV 1xRF output, SC/APC type PON connector, Broadcast storm control, ACL access control