Du-bush - Import export

Black thermoplastic. Steel grade 5.8 or stainless steel 1.4305. Version: Metal parts trivalent blue passivated steel or bright stainless steel. Note: Star grips with projecting steel bush and blind hole or female thread are especially suited for cross pinning. Drawing reference: Form H: bush with blind hole Form K: tapped bush Form L: external thread

Eccentric bushes enable lateral spring plungers to be precisely positioned with regard to the workpiece.

Housing hardened and black oxidised. Contact faces ground. Note: Locating bushes are placed in a fixture or interchangeable subplate and form the counterpart to the locating cylinder. The locating bushes are centred in a reamed hole and then fastened with 4 screws. The balls of the locating cylinder engage in the groove in the locating bush, thereby forming a fast, secure and highly accurate changeover unit, and reducing setup and changeover times. Attention: Please observe installation notes of the locating bushes.

These bushes are ideal for easy and quick positioning of ball lock pins and locking pins. Advantages: centred by the centring collar. easy and reliable installation. can be screwed into various materials. usable both sides

Selflubricating. Hardness 190220 HB. Note The guide bushes are radially and axially applicable. The bearing elements are maintenancefree and wearresistant. The graphite inserts provide lifelong lubrication. Preferably for travel speeds < 0.5 m/s. (Additional lubrication is recommended for extreme loading with a higher travel speeds). Temperature range Temporary temperature peaks up to ca. 200°C. Tolerances The bore for the bearings should correspond to ISO tolerance H7. The tolerance h6 to h7 is recommended for the shaft.

bearing bush material: white POM size: diameter 17 +/- 0.10 mm, height 10 +/- 0.15 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Hardened to 780 ±40 HV 10 and ground. Without leadin groove. Note All bushes have the bore size marked on the upper face, e.g. 10. Diameters D1 over 15 mm increase in size by 0.5 mm. Dowels or coiled spring pins together with DIN 1731 flathead screws can be used in place of the stop pin.

From diameter D1 over 15 mm size increases are 0.5 mm.

From diameter D1 over 15 mm size increases are 0.5 mm. 1) Chamfer for insert

These eccentric bushes can be used as e.g. stops or tolerance compensators. 1) DIN 332-1 centre bore, Form A 2) Basic form with centring 3) With scale groove for visual stop 4) Through hole 5) Tapped hole Advantages: Easy handling Grub screw clamping Minimal installation space Arbitrary mounting position Customised application Versatile use

These centring clamps enable workpieces to be centred on and lightly clamped in a bore. The clamps have a wide expansion range. The series covers a bore range of Ø12 to Ø30 mm. To increase the centring accuracy the clamps with internal thread have a centring spigot (D2) for a locating hole. The centring accuracy is ±0.2 mm. Centring clamps with female threads fit on M6 grid systems (see illustration).

Exceptionally wearresistant Dimensionally stable even at high temperatures Electrically insulating Frequency neutral

The receiver bush is for quick and safe insertion of ball operated lifting pins. They offer an easy and reliable installation in a variety of lifting materials. Also for use with thin walled materials and blind holes. They are corrosion resistant with low wearing.

Handwheel, reinforced and stabilised polyamide. Centre caps, polyamide. Centre bushes, steel. Tapped insert for cylinder grip, brass. Version: Handwheel, oil and grease resistant, black (RAL 9011), satin finish. Centre caps, grey (RAL 7035). Centre bushes, black oxidised. On request: Other cap colours. Special versions.

Black thermoplastic. Bush and screw 5.8 steel or 1.4305 stainless steel. Version: Steel trivalent blue passivated. Stainless steel, bright.

1. Screw the locking screw into the collar bush and fixture clamp and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp

REFERENCE NUMBER 9968025, 502378, 086190566M1, CA0128881, 82850292, 51335984, 11709450, 122259A1, 37700410855, 041068R1, 3785490M1, 3200530, S06/41361, M66014.2, 66014.2, 548912, 6190566M1, ER128881 MACHINE NAME CARRARO, TEREX, VOLVO, NEW HOLLAND AND CASE, KOMATSU, BOBCAT, CASE, MANITOU, HIDROMEK, CATERPILLAR AND JOHN DEERE MACHINE MODEL BL60, BL61, BL61+, BL70, BL71B, BL71+, 580K, 580SK, 580SLP, 580SLE, 590SLE, 820, 840, 860, 880, 970, FB100, WB 93R, WB97R, WB140, WB1465, WB150PS, WB1502

locking bush material: black POM size: diameter 34.6 +0/-0.5 mm, height 46 +0.5/-0 mm groove width 2.2 mm, depth 27 +1/-0 mm, bottom round section R2 Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Protection of transformers, installations, lighting fixtures etc. Material: PA 6 Colour: natural Further types on written request.

Flat washers ~DIN 125 (~DIN EN ISO 7089) form A Material: zinc-plated steel (final digits 52) stainless steel (final digits 53)

Flat washers ~DIN 9021 (~DIN 34816) Material: PA Colour: natural

Flat washers ~DIN 433 (~DIN EN ISO 7092) Material: PA Colour: natural

Flat washers ~DIN 125 (~DIN EN ISO 7089) Material: PVDF Colour: natural

Flat washers ~DIN 125 (~DIN EN ISO 7089) Material: PP Colour: natural

Flat washers ~DIN 125 (~DIN EN ISO 7089) Material: PA Colour: natural

Suitable for all rotating and moving parts. Ideal for silent hinges and low-speed machines. Electrical insulation between shaft and bearing housing. Material: PA 6.6 Colour: natural Due to its gliding properties and high wear resistance, polyamide is also very applicable during dry running. Resistant to fouling, atmospheric influences and to the majority of chemicals. After assembly the bearing clearance is approx. 1% of the shaft diameter. Further types or materials on written request.