Signal amplifiers - Import export

The newly developed sensor PROFIBUS module model 9221 is predestined for the integration of various analog sensor output signals into complex, net worked and peripheral automation structures. This module finds its fields of application in the industrial automation technology as well as the test rig technology based on its secure and reliable transfer mode, the fast transfer speed and its simple construction. The inputs (e.g. PLC signal gauge) and outputs in addition to the external control allow a zero compensation by trigger via proximity switch or fast alerting on passing of set point values. Industrial type connection and mounting techniques enable the user the adaption and integration in the existing mechanical and electrical environment. The excellent quality of measurement together with the high grade capture of mean values also enable the application in research and development. The use of standardized PROFIBUS protocols makes the connection an easy task for the programmer.

Situations often occur in practice in which it is necessary to place a measuring amplifier immediately in the neighborhood of the sensor in order to be able to access a standard signal there. In this way, long distances to the evaluating electronics can be covered. This task can ideally be performed by the 9236 in-line measuring amplifier. With its high degree of protection (IP67) its singlechannel version can be integrated into the application even in the tough environment outside the switch gear cabinet. — Automatic production machinery — Laboratory measurements — Integration into customer‘s circuit boards — Field measurements Features: — Operates with up to 4 measuring channels — Voltage output 0 to ± 5 V / 0 to ±10 V — Protected against reverse connection and short-circuit — Also available as circuit board without housing — Simple configuration using DIP switch — High degree of protection up to IP67

The amplifier module model 9243 is used wherever measurement signals from strain gauges, potentiometric sensors or DC/DC sensors have to be converted into standard signals. Simply by mounting on conventional DIN-mount rails, it is possible to position the amplifier module on location, in the proximity of the sensor. Especially for rough environments a IP65 version is available. The broad auxiliary power range and the choice between AC or DC permits operation on standard power supplies used in switch gear cabinets. A highly precise reference voltage source is built-in for calibration purposes. A calibrating shunt can also be connected via two separate terminals. This permits deliberate detuning of a strain gauge sensor for calibration or merely to check the measuring chain.

Simultaneous speed / torque display universally applicable sufficient for many measuring tasks 11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm Very short Broad input voltage range Current output and voltage output Measurement accuracy: ≤ 0,5% of full scale Torque ranges from 0,5 to 1000 Nm Contactless transfer of measurement signal Proven strain gage technology Integrated signal amplifier Single power supply Multipurpose use Simultaneous speed/torque indication 4-segment display with sign Peak mode (clockwise only) Indication area on LCD display 30 x 11 mm Speed indication updated 1x sample/second Torque updated 1,000 samples/second

HiBoost Hi23-5S is a revolutionary solution for mobile signal reception improvement. The equipment is unique on the market as it supports 5 networks at a time! Key features •Network: EGSM 900+ LTE/DCS 1800 +WCDMA 2100+LTE 800+LTE 2600 MHz •Coverage: up to 3000 sq m •Installation kit with all the necessary components •Real-time LCD display •CE- and RoHS-certified •Multiple phones in one area (up to 80 users) •Full duplex

HiBoost Hi20-5S is a revolutionary solution for mobile signal reception improvement. The equipment is unique on the market as it supports 5 networks at a time! Key features •Network: EGSM 900+ LTE/DCS 1800 +WCDMA 2100+LTE 800+LTE 2600 MHz •Coverage: up to 2000 sq m •Installation kit with all the necessary components •Real-time LCD display •CE- and RoHS-certified •Multiple phones in one area (up to 80 users) •Full duplex

HiBoost Hi17-5S is a revolutionary solution for mobile signal reception improvement. The equipment is unique on the market as it supports 5 networks at a time! Key features •Network: EGSM 900+ LTE/DCS 1800 +WCDMA 2100+LTE 800+LTE 2600 MHz •Coverage: up to 1000 sq m •Installation kit with all the necessary components •Real-time LCD display •CE- and RoHS-certified •Multiple phones in one area (up to 80 users) •Full duplex

HiBoost Hi13-5S is a revolutionary solution for mobile signal reception improvement. The equipment is unique on the market as it supports 5 networks at a time! Key features •Network: EGSM 900+ LTE/DCS 1800 +WCDMA 2100+LTE 800+LTE 2600 MHz •Coverage: up to 500 sq m •Installation kit with all the necessary components •Real-time LCD display •CE- and RoHS-certified •Multiple phones in one area (up to 80 users) •Full duplex

The modules of the IMSP series are connected before the interface devices and provide reliable protection against voltage surges. The only 6.2 mm wide DIN rail devices are IP20 rated and can be used in the Ex and non-Ex area. Among other things, modules are available for surge-protected connection of analog signals (e.g. for analog signal isolators and temperature measuring amplifiers) as well as for connecting binary signals from switches or inductive and capacitive sensors.

With its rugged housing and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals or current signals that can be transmitted over relatively long distances. For high viscose materials, a front-level membrane M12 x 1 is available, and with this disruptive dead volumes can be expelled. The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure (measurement type relative). For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum. As an electrical connection, a DIN 43650A valve connector or an M12 x 1, 4-pin connection is available.

The Texas Instruments OPA2188AIDR Instrumentation Amplifier is a wideband, high-performance amplifier ideal for medical and industrial applications. It features a high Common-Mode-Rejection-Ratio (CMRR) of 120 dB, a low input bias current of 850 pA, an input offset voltage of 25 uV, an operating supply current of 475 uA, and low input voltage noise density of 0.25 nV/sqrt Hz. It also has a wide range of operating temperatures, from -55° C to 125° C, and includes an internal PAs for optimal signal-to-noise ratio. The amplifier also includes a shutdown feature for easy power management. Features of the OPA2188AIDR include: • CMRR: 120 dB • Shutdown: No Shutdown • Input Bias Current: 850 pA • Input Offset Voltage: 25 uV • Operating Supply Current: 475 uA • RoHS Details • Input Voltage Noise Density: 0.25 nV/sqrt Hz • Number of Channels: 2 Channel The OPA2188AIDR can be used in a variety of applications including medical imaging

Torque range from ± 0 - 0,01 Nm to ± 0 - 1500 Nm with speed or angle detection waterproof (IP67) contactless integral torque amplifier single supply voltage wide range of application small form low moment of inertia speed measurement (option) angle measurement (option) DRWPL series torque transducers are fitted with a number of gaskets in compliance with international protection IP67. The devices are also available with optional speed or angle detection for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V.

Series DRDL torque transducers are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and no maintenance. These transducers are also available with optional speed and angular measurement for a host of applications. The integrated signal amplifier is powered with 12 V DC and outputs an electrically isolated analog signal of 0 to ± 10 V per torque range. Simultaneous measurement of peak torque and operating torque Torquesensor with speed or angle measurement High accuracy with 100% overload protection 16 measurement range from ± 0 - 0,5 Nm up to ± 0 - 5000 Nm 2 torque ranges (1/10 - 1/2 of the 1st measuring range) Integral signal amplifier Low moment of inertia Single supply voltage Wide range of applications Multipurpose use Contactless output signals Compact Speed measurement (option) Angular measurement (option)

11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm Low cost. Very short. Broad input voltage range. Current output and voltage output. Optional speed measurement. Measurement accuracy: ≤ 0,5% of full scale. Torque ranges from 0,5 to 1000 Nm. Multipurpose use. Contactless transfer of measurement signal. Integrated signal amplifier. Proven strain gage technology. Single power supply.

Series DRVL torque transducers are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and no maintenance. These transducers are also available with optional speed and angular measurement for a host of applications. The integrated signal amplifier is powered with 10 - 28,8 V DC and outputs an electrically isolated analog signals of 0 ± 10 V and 10 kHz ± 5 kHz. The standard version has smooth shaft ends, several types are available with optional keyways

11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm current and voltage output measurement accuracy ≤ 0.25% contactless signal transmission proven strain gauge technology built-in signal amplifier simple power supply universally applicable RPM measurement optional The new features: more versatile mounting options torsion shaft stainless mistake-proof installation oriented mounting large coupling selection The torque sensors of the DRBL series are a further development of our DRBK series and are suitable for use in the laboratory and for industrial environments with their compact dimensions and diverse mounting options. A factory calibration certificate with 25% increments (left, right) is included in the scope of delivery. The non-contact transmission of the measurement signal and the supply energy enables low-wear and m aintenance-free continuous operation.

No service needed because of contactless data acquisition High accuracy due to frequency modulation and strain gage technology Single power supply High noise immunity due to amplified active signal integrated sensor-detection chip for use with GMV2 analyzer automotive industry test benches assembly applications pulsed tools hexagonal drive 7 Measurement range from ± 0 - 1 Nm up to ± 0 - 20 Nm optionally with angle measurement

The transducer is suited for the most varied measurement duties on threaded fasteners, to check and adjust assembly tools, like screwdrivers and spanners, and to sense loosening torques, etc. It can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. Hence, there is practically no wear on the device. This sensor is suited for cyclical as well as continuous testing of tools. As the sensor is designed to be torsionally rigid any errors due to it are minimized. No service needed because of contactless data aquisition High interference immunity due to amplified active signal High accuracy due to frequency modulation and strain gage technology Power supply Optional angle detection torque ranges from 1 Nm up to 10.000 Nm torque with square drive with or without angle (w) function Variant bracket for quick assembly

No service needed because of contact-less data acquisition Frequency modulation and strain gauge principle cause high accuracy Ordinary power supply High interference rejection because of amplified active signal Quick-release coupling Short form, especially suitable for automatic screwing machines Measurement, adjustment and examination without removing the screwing tool Suitable for permanent use (even with higher speed) Suitable for clockwise and counter-clockwise measurement hexagonal drive very short construction 6 torque range from ± 0 - 2 Nm to ± 0 - 20 Nm rotation angle measurement option

EGE amplifiers process the signals of the EGE filling level sensors for extreme temperatures at a safe distance and are used to set up the sensor via intuitive operation using potentiometer and LED strip. Amplifiers for EGE high temperature limit switches feature an auto-calibration of the switching point at the press of a button. EGE amplifiers provide switching signals or analogue signals, dependent on the device.

With its compact, bearingless, maintenance-free design, the new TF Torque Flange Sensor from Magtrol brings many appealing advantages to torque measurement applications. The TF’s high torsional rigidity supports direct mounting on the machine shaft or flange, avoiding the use of couplings on one side. This allows easy integration into a test system, shortens the overall length of the test bench and reduces costs. Based on strain-gauge technology, the TF Sensor’s precise telemetry system enables highly accurate signal transmission. A signal amplifier mounted in the measuring flange amplifies the measuring signal, modulates it to high frequency and transmits it inductively (via the HF transmitter) to the receiver. In the receiver, the digitized torque signal is transformed into an analog output signal of ±10 VDC. Rotational speed can be measured and converted to a TTL output signal with the optional speed pickup. more info www.magtrol.com

Magtrol's new PSD hand-held indicator is a stand-alone unit powered by 3 AA batteries or via USB. It is very compact (~160 x 80 x 50 mm) and can be easily carried and used on a civil engineering site, in a research & development office or laboratory as well as in production shop. Its case is ergonomic, waterproof (IP54) and protected by a rubber shock absorber. It is suitable to any type of strain gauge transducers, being a load cell, a load pin or a reaction torque sensor. The internal amplifier can process signal range of ±0.3 ... 5 mV/V. The new PSD Portable Display is very flexible and complies with the highest specification in terms of accuracy (0.01%) and measurement frequency (1600/s). It allows to store up to 16 programmable measurement ranges which can be configured either directly on the unit or via its USB interface and dedicated software (included). Multiple force or torque transducers can be connected for which actual data as well as the ... read more: www.magtrol.

The CONDA420 conditioners amplifiers provide standardised signals in current and voltage from every load cell, force transducer and torque sensor based on straingauge technology. Sensor excitation 10 V (120 mA max.) available for up to 4 x 350 ohms. Load cells connected in parallel o DIN rail mounting

The CONDSGA conditioners amplifiers provide standardised signals in current and voltage from every load cell, force transducer and torque sensor based on straingauge technology. Power supply CONDSGAA 115...230 VAC / 18...24 VDC CONDSGAD 18...24 VDC

The Series AFS Air Flow Sensor is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork. It has an aero-dynamic elliptical shape resulting in a minimum pressure drop and amplified differential pressure signals which allow accurate measurement of air velocities from 300 fpm to 5000 fpm (1.5 m/s to 20 m/s). It includes multiple sensing points aligned in line grooves to measure total and static pressure. It is easy to install and cost effective. Series AFS Airflow Sensors are perfect for VAV Retrofits. The AFS is a differential pressure air velocity sensor designed to measure average air velocities in VAV terminal units and HVAC ductwork.

Integrating sphere detector for Laser power in W. Features: 300mm dia, 101.6mm dia port, BaSO4 coating, 400-1100nm responsivity, for the usage with optometers and signal amplifiers, Calibration certificate

Integrating sphere detector for Laser power in W. Features: 150mm dia, 38.1mm dia port, BaSO4 coating, 400-1100nm responsivity, for the usage with optometers and signal amplifiers, Calibration certificate

Integrating sphere detector for Laser power in W. Features: 100mm dia, 15mm dia port, BaSO4 coating, 400-1100nm responsivity, for the usage with optometers and signal amplifiers, Calibration certificate

Integrating sphere detector for luminous flux (lm) of 2Ï€ sources. Features: 150mm dia, synthetic coating, 38.1mm dia port, for the usage with optometers and signal amplifiers, Calibration certificate