Silicone sheets - Import export

We are able to offer various grades of rubber sheeting, these include:- Neoprene For general purpose gaskets and seals. Good UV resistance and moderate resistance to oils and chemicals. Commercial grade 60°/70° sh. BS2752 grades from 40° to 70°. Nitrile Mainly used in an oil/fuel environment as it has excellent resistance. Commercial grade 60°/70° sh. BS2751 40° to 70° Natural This material has excellent physical properties so is ideal for using as a seal in boats port lights, hatches and doors. It has excellent abrasion resistance, so makes an ideal liner for shot blast cabinets and material chutes. It is not resistant to oils. Hardness ranges from 40° to 70° A food quality grade is available for marine fresh water tank seals.

We are able to offer various grades of rubber sheeting, these include:- Neoprene For general purpose gaskets and seals. Good UV resistance and moderate resistance to oils and chemicals. Commercial grade 60°/70° sh. BS2752 grades from 40° to 70°. Nitrile Mainly used in an oil/fuel environment as it has excellent resistance. Commercial grade 60°/70° sh. BS2751 40° to 70° Natural This material has excellent physical properties so is ideal for using as a seal in boats port lights, hatches and doors. It has excellent abrasion resistance, so makes an ideal liner for shot blast cabinets and material chutes. It is not resistant to oils. Hardness ranges from 40° to 70° A food quality grade is available for marine fresh water tank seals.

We are able to offer various grades of rubber sheeting, these include:- Neoprene For general purpose gaskets and seals. Good UV resistance and moderate resistance to oils and chemicals. Commercial grade 60°/70° sh. BS2752 grades from 40° to 70°. Nitrile Mainly used in an oil/fuel environment as it has excellent resistance. Commercial grade 60°/70° sh. BS2751 40° to 70° Natural This material has excellent physical properties so is ideal for using as a seal in boats port lights, hatches and doors. It has excellent abrasion resistance, so makes an ideal liner for shot blast cabinets and material chutes. It is not resistant to oils. Hardness ranges from 40° to 70° A food quality grade is available for marine fresh water tank seals.

Flesh color silicone sheeting with hypoallergenic adhesive. 2. Snugfitting, washable and reusable for more than 15 times. 3. Painfree and easy removal.

Silicon Nitride (Si3N4) is 60% lighter than steel but strong enough to survive some of the most demanding applications in a variety of industries. This lightweight, high-strength ceramic material is used as an alternative to stainless steel, super alloys, tungsten carbides and first-generation ceramics such as Al2O3 and ZrO2. It offers excellent thermal shock resistance and high fracture toughness, compatibility with nonferrous metal melts, and improved structural reliability compared to other ceramic materials. Silicon Nitride (Si3N4) Characteristics: >Good thermal shock resistance >Creep resistance >Low density >High fracture toughness >High hardness and wear resistance >Electrical resistivity

Aldea BLT 4-16 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-12 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 2-18 DN25 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-3 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-14 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-22 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-19 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

As part of the product development process, we always keep in mind the manufacturer's point of view. Meaning that we design from the start to minimize the problems of production and keep the budget tight. With an in-depth knowledge of manufacturing processes, we optimise the design for lowest production cost and lowest manufacturing risk. Regardless if you're planning to make just a few pieces, a few hundred, or thousands. Some of the processes we're proficient with are: - injection moulding of hard plastics, silicone and rubber - sheet metal forming - assembly - 3D printing (FDM, SLS, SLA, FGF) - packagings - CNC milling - spinning, turning - woodworking - and more Design for manufacture also includes working out and testing every detail of the product, including snap fits, colours and finishes, tolerances and clearances.

Toner particles and paper dust accumulate on fuser rollers over time in toner-based printing processes,. This can result in image quality defects and shortened life of fusing components. Periodic cleaning with “Clean Protect” ensures a safe and thorough removal of any residue on the roller surface. Unlike alternative chemical cleaning substances, “Clean Protect” preserves sensitive roller surfaces, ensures defect-free printouts, and promotes longer fuser roller life. Our product is safe and effective. This cleaning solution is applied manually and has minimal health risks as well as having a low impact on the environment. Safety data sheets SDS silicone oil monochrome (PDF, 43 kB) SDS silicone oil color (PDF, 42 kB) SDS roller cleaning agent "Clean Protect" (PDF, 35 kB) Product information sheet "Clean Protect" (PDF, 33 kB)

Variac is an autotransformer with adjustable voltage. It has a coal wheel (a sliding brush in simple variants) that allows you to change the voltage from zero to maximum without any problem. The variac serves to provide the desired electrical energy to the laboratory facilities and to compensate for the voltage and other needs of the network. Variac is an indispensable device when installing and testing electrical devices. The first-class manufacturing is made of a silicon sheet core and varieties of electrolytic copper are produced as a special group according to the customer's request

material: sheet steel with silicon coating Proficoat 100 sets: 3 single moulds with adjacent profile frame. Also available for baking trolleys. Please ask! Beautiful "seamless" cakes. Our Gugelhopf- and Ring moulds with the "seamless" stamp are deep-drawn from a single sheet using tooling developed by us specially for this purpose. There is therefore no joint or seam, as in conventiona production. The result: Easier removal from the mould. The cake comes out perfect, without any seam. Moulds: mould with fitted tube mould deep-drawn out of one part mould as set 3-strap "Classic" with smooth border Original "Vienna"with ribbed border "Trendo" "Delizi" with grooved bottom with smooth bottom "Wikinger" oval Set 3-strap moulds seamless deep-drawn

Our wide range of Specialist Sheetings includes: • Viton™ and FLUOR-A-COM® (FKM) Sheetings • Viton™ Sponge Sheeting • EPDM Sheeting • Diaphragm & Thin Gauge Rubber Sheetings • Silicone and Silicone Sponge Sheeting • Food Safe Sheeting • Metal Detectable Sheeting • Electrically Conductive Sheeting Our food safe sheetings provide a high quality safe and reliable product that is an ideal solution for the manufacturing processes in the food, drinks and pharmaceutical industries. J-Flex silicone sheeting products are independently tested and comply with the requirements issued by the US FDA, German BfR as well as EC Food Safety regulations. By complying with the above regulations and authorities, J-Flex food grade silicone rubber sheeting offers the reassurance that it does not contain any of the banned substances that some lower quality products on the market do.

ATS distributes, stocks, and fabricates many silicone elastomeric materials and products. These products have incredible environmental and heat-resistant properties as well as being odourless, tasteless, and nontoxic. Their low flammable components make the material much more popular for various applications. Commonly sold items include: silicone rubber sheets, silicone sponges, and foam, fluorosilicone sheet and sponge, urethane foam including Poron micro cellular, neoprene, nitrile, Viton, Ensolite, and others. It is also ideal for electrical insulation as sheets or tape, wire and cable coverings, extruded sleeving and mouldings, coated glass-fiber cloths, and other multi-use tape