Special alloys - Import export

Alloy scrap with high magnetic permeability (soft magnetic alloys). It is used in production of cores for small-sized transformers, chokes and relays operating in weak fields of magnetic shields. Scrap with small thickness (0.05-0.02 mm) is used in production of cores of pulse transformers, magnetic amplifiers and static relays.Chemical composition: Ni 78,5% — 80% Mn 0,6% — 1,1% If 0.3% - 0.5% C < 0.3% Mo 3.8% - 4.1% Fe = balance GOST 10994-74 Precision alloys. Grades.

Our aluminum extrusion dies, which we supply from special steel alloys, are capable of meeting the desired durability, function, smooth surface and EN-755-9 tolerance specifications. Thanks to the systems integrated with the latest technology in the mold house and our strong employees, all molds are regularly cleaned and maintained.

Nitinol (Nickel and titanium alloy) introduction: Nickel titanium alloy is a kind of shape memory alloys, shape memory alloy is able to own plastic deformation at a certain temperature automatically restore to the original shape of special alloy its expansion rate is above 20%, the fatigue life of 1 * ten to the seventh, 10 times higher than ordinary spring damping properties, its corrosion resistance is superior to the current medical * * stainless steel, so it can satisfy the application requirement of all kinds of engineering and medicine, is a very * * of the functional materials in addition to memory alloy has a unique shape memory function, but also has high wear resistance corrosion and other excellent characteristics of damping and super elasticity. Nickel Titanium (also known as Nitinol or NiTi) is in the unique class of shape memory alloys. A thermoelastic martensitic phase transformation in the material is responsible for its extraordinary properties.

IKO PILLOBALLs are compact selfaligning spherical bushings which can support a large radial load and a bidirectional axial load at the same time. These bearings are available in insert type, diecast type and lubricationfree type depending on the type of sliding surface. In the insert type, a spherical inner ring makes contact with a special copper alloy bushing with superior runin properties. In the diecast type, a spherical inner ring makes direct contact with the bore surface of the body of special zinc diecast alloy. In the maintenancefree type, a spherical inner ring makes contact with a special selflubricating PTFE liner. Thus, a smooth rotational and oscillatory motion can be achieved with superior antiwear and load properties in each type. PILLOBALL Rod Ends have either a female thread in the body or a male thread on the body, so they can be easily assembled onto machines. They are used in control and link mechanisms in machine tools, textile machines

IKO LBalls are selfaligning Spherical Bushings consisting of a special zinc diecast alloy body and a studded ball which has its axis at right angles to the body. They can perform tilting movement, oscillating movement and rotation with low torque, and transmit power smoothly due to uniform clearance between the sliding surfaces. Their superior wear resistance assures stable accuracy for long periods of time, and maintenance is simple. They are very economical bearings. For these reasons, they are widely used in link mechanisms in automobiles, construction machinery, farm and packaging machines, etc.

By creating specialized aluminum alloys, pioneering new treatments and combining aluminum components with other materials such as paper, plastic and fiberglass, Novelis has become the global quality leader for the transportation manufacturing industry. We have created a range of transportation manufacturing products that provide insulation against heat, sound and gases, high strength so components remain effective under pressure, and superior flexibility for a full range of designs and implementations. Key Novelis aluminum components include heat exchangers, heat protection mats and sleeves, energy absorption elements, hoses, silencers and flexible tubes, including heat protection tubes, air ducts and exhaust pipes. Novelis is a leading supplier of light-gauge, narrow-slit aluminum fin stock (bare and clad) and brazing sheet used in the production of heat exchangers.

Pneumatic stapler for to sealing the top part of cardboard boxes. Body made of special aluminium alloy and regulation of different anvil penetration and clinching. Light and handy. With a simple adjustment the stapler is employable with staples 35 mm width and 15 - 19 mm lengths (1 single tool for two type of staples).

Manual stapler, extremely compact and light, suitable for stitching cardboard boxes. Body with a special aluminum alloy and depth/dot shape adjustment. Each model can use two measures of 15 and 19 mm points by simply turning the adjusting device.

In our new production space, we have at our disposal 30 state-of-the-art automated punching & bending machines. In addition to bent wire parts, we also produce bent strip parts here. Production to order with complex forming: Bent strip parts are produced from a broad range of materials, including for instance stainless steel, alloyed or carbon steel, brass, copper, bronze, or even K55 or K75, a specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

Professional sealant gun with strong drive plate Rotary carriage and ladder hoak Rubbercoated handle and trigger Corrosion protected driving parts with special blackened alloy Trigger ratio 171 For cartridges up to 310ml

Zirconium is a silver-grey, shiny heavy metal. In its pure form it is easy to work, corrosion resistant even at high temperatures and has a very low neutron capture cross section. In addition, zirconium offers good stability against structural damage caused by neutron irradiation and against cavitation by coolant flows. The metal is mainly used pure or alloyed with 1.2-1.7% tin, for corrosion resistant pipes, fittings and valves in the chemical industry. This special alloy is called Zircaloy. Zirconium plays an important role in reactor construction. It is used for fuel element claddings and holders, for the pressure vessel lining, and for all structural components that come into contact with neutrons. In the rocket and jet aircraft industry zirconium is used for the manufacture of combustion chambers and feed lines. In electron and X-ray tubes zirconium is used as getter material.

For use in peristaltic pumps to transport aggressive media, abrasive materials, highly viscous liquids and foodstuffs in practically all industrial fields. Construction: Tube in light or dark special qualities for abrasive media, liquids to max. 80°C (NR) for drinking water (IIR) for oils, petrol, fuels to max. 80°C (NBR) for aggressive media to max. 120°C (CSM) for chemical media (EPDM) FDA-approved food quality Special fabric inlays Interior smooth, exterior smooth polished SIMON – peristaltic pump hoses are manufactured with special fabric inlays developed specifically for the application. This guarantees harmonious flexing with permanently stable cross-sections. With the dynamically adjusted elastomers mixtures the result is lower overpressing with perfect tightness and low working temperatures. This achieves exceptionally long service life. These hoses are polished with abrasive tools in special alloys. This method guarantees a homogenous surface microstructure of the...

Flat and Tapered Beam Torque Wrenches The error proofing industry started with a deflecting beam wrench built and sold by Paul A. Sturtevant. That was 1924. Highly accurate, very easy to use, and so durable they often last for decades - and decades! The special alloy steel beam is ground to a rate of deflection with the use of dead weights, rather than a dimensional tolerance. This process is time consuming and very labor intensive, but the result is a tool that remains accurate as long as the beam is intact and the pointer is on zero under no-load condition. The flat shape of the beam insures the wrench remains at a right angle to the fastener, reducing or eliminating side-loading error. This unique taper-grinding distributes stress evenly along the entire length of the beam, extending tool life indefinitely. With a minimum of moving parts, these tools are virtually repair and maintenance free.

Production to order – also with special-purpose materials as required: We only produce in accordance with customer specifications. Compression springs can assume a wide variety of designs and forms. Our production facilities include compression springs with wire thicknesses in the range of 0.30 to 3.00 mm with abraded ends and in the range of 0.10 to 4.00 mm with unabraded ends. Even extremely strict tolerances regarding length and strength are adhered to in our compression spring production facility. Special-purpose materials that meet specific requirements can also be integrated into production without any problems. Wire materials: All standard spring steel wires in accordance with EN 10270. Non-ferrous wires made of copper, brass and bronze. Special alloys such as: Hasteloy, CuNi44, NbZr1, TaW2. Other materials on request.

Dimensions Depending on the required stamp power (material strength, material thickness, and part shape) Material All spring materials in soft and hard condition as well as quality steels with lower strengths and aluminum alloy and also special alloy Stainless steel up to 1900 N/m² Rubber-coated strip material Hardening Through external services Coating Fully or partly coated strip material In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Fully automated manufacturing of components and mounting Fully automated welding Contact springs with contact rivet Bushes clinched, welded, and open Special processing like thread cutting, screw mounting, and rivets feasible Special packaging in blister pack, trays or magazines Rapid prototyping

As mechanical connection elements, weld-on sockets are used wherever screw connections for measuring points need to be created quickly, reliably and economically. Along with standard weld-on sockets which is supplied in 1.4301 material, on request other materials such as special steels and alloys can also be used.

Features 1. Double purposes for smoke & fog 2. High performance& Light weight 3. All tanks are manufactured from stainless steel 4. Combustion pipe made out of special stainless alloy excels in resisting heat and erosion 5. Our own making engine excels in power 6. Newly developed our machine proved ultra-particle state through spouting particle size of 5~30 Microns(μ) 7. IZ-150AS is suitable for using in a factory, public place and residential areas.

We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm. Pharmaceuticals and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.

We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm.Pharmaceutical and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.

For the majority of the resistor units manufactured by Schniewindt, the design is based on CSN® Resistor Webs. For manufacturing the resistor webs, resistive wires are woven meander shaped into temperature resistant insulation yarn. Besides the excellent high voltage strength and the typedependent low inductivity of the resistor webs, these webs are additionally suitable for high specific load operation due to the excellent convection conditions of the resistor web design. By selecting special high grade resistive alloys for manufacturing of the resistor webs, resistor units for operation under almost any environmental condition can be developed

Introducing Skilled Manpower - a premier provider of extrusion line solutions tailored to meet your specific requirements. With our state-of-the-art facilities, we boast a range of 5" to 10" presses, meticulously designed to handle a variety of profile sections. At Skilled Manpower, we understand the significance of alloy selection and its impact on the final product. That's why we prioritize your preferences when it comes to alloy type and press line. Our extrusion process is optimized to accommodate special alloys, including EN AW 6060, 6063, 6463, 6005, 6082, 6013, 6005, and 7xxx. What sets us apart is our unwavering commitment to delivering excellence. With a team of highly skilled professionals and a dedicated management team, we ensure that each and every product leaving our facility exceeds customer expectations. Our meticulous attention to detail guarantees that our extrusions are tailored to satisfy your specific end-use requirements.

Kigema applies centrifugal casting to produce bushes, rings and sleeves using all copper alloys covered by global standars: PN-EN 1982, DIN 1705, 1709, 1714, PN 91/H-87026, ASTM B271, BS 1400 and using special alloys too.

Kigema applies gravity casting to produce plates and bars using all copper alloys covered by global standards: PN-EN 1982, DIN 1705, 1709, 1714, PN 91/H-87026, ASTM B271, BS 1400 and using special alloys too.

KIGEMA applies centrifugal casting to produce bushes, rings and sleeves using all copper and aluminum alloys covered by international and local casting standards (DIN EN 1982:1998-12, PN-EN 1982, DIN 1705, 1709, 1714, PN 91/H-87026, ASTM B271, BS 1400), as well as using special alloys.

KIGEMA applies centrifugal casting to components using all copper and aluminum alloys covered by international and local casting standards (DIN EN 1982:1998-12, PN-EN 1982, DIN 1705, 1709, 1714, PN 91/H-87026, ASTM B271, BS 1400), as well as using special alloys.

The Murphy Bed mechanism is the most proven of all wallbed designs, having been in use for around 100 years. This design will provide years of trouble-free use and operate for thousands of cycles. Our mechanism is constructed of high-quality steel and is then powder-coated with a scratch proof, black ridge finish. The counter-balance extension springs are made of our special alloy steel. The number of springs needed may be increased or decreased depending on the weight of the mattress and other bedding. We provide a full set of springs to balance all mattresses. A nylon webbing strap holds the mattress in position once upright. The Murphy Bed installation may be attached to the floor; alternatively we have developed a new Wall Mount Bracket to enable the installer to mount directly to the baseboard (skirting board) to avoid cutting into carpet, wood floor, or concrete.

Laser Ceramic Nozzle Holder Information: 1.Imported ceramics + high quality special alloy 2.Ensure the consistency of thermal expansion of ceramic ring materials Prevent burst 3.The ceramic body and the alloy are closely connected, which is not deformed when heated. 4.The surface finish is high and the air flow is smoother. 5.Signal stability high sensitivity 6.The imported conductive adhesive and gold-plated copper needle have good conductivity,high sensitivity,good follow-up,effective insulation, and reduce the demage caused by impact. 7.Widely used: It is suitable for laser cutting heads of various brands Product Paramaters 1.Material: Imported Ceramic High Quality Specical Alloy 2. Thread: M5 - M14 3. Outside Diameter: 17.5 - 41mm 4. Height: 4 -34mm

Laser Ceramic Nozzle Holder Information: 1.Imported ceramics + high quality special alloy 2.Ensure the consistency of thermal expansion of ceramic ring materials Prevent burst 3.The ceramic body and the alloy are closely connected, which is not deformed when heated. 4.The surface finish is high and the air flow is smoother. 5.Signal stability high sensitivity 6.The imported conductive adhesive and gold-plated copper needle have good conductivity,high sensitivity,good follow-up,effective insulation, and reduce the demage caused by impact. 7.Widely used: It is suitable for laser cutting heads of various brands Product Paramaters 1.Material: Imported Ceramic High Quality Specical Alloy 2. Thread: M5 - M14 3. Outside Diameter: 17.5 - 41mm 4. Height: 4 -34mm