Special angles - Import export

Stainless steel pipe connectors and ball joints are used for quick dismantling of two pipes. The ball joints offer the additional advantage of attaching the pipes at a special angle.

Rotary drives convert the linear movement of the pneumatic cylinders into a rotary movement. Standard rotation angles are 90° – 180° – 270° – 360°. Adjustable by 10°. Special angles are possible.

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

We sharpen not only industrial knives made by us , but also knives from other manufacturers. We use the most modern grinders for sharpening knives. Knives are sharpened with special angles that we have tested and can recommend as the most suitable for the given method of use. Parameters of sharpening knives and saws We grind knives up to a length of 4500 mm , circular knives and saws up to a diameter of 600 mm . We grind all types of steel and carbide (HM or also TC). Your knives are sharpened by specially trained workers on the most modern machines, we guarantee an accuracy of 0.005 mm per 2.5 m. Loads of sharpened knives We pack and deliver knives throughout the Czech Republic. We provide consultancy to our customers in the field of knife life and their use. Knife sharpening – sharpening of dies and tools of special punches.

We not only grind our manufactured industrial knives but also knives of other manufacturers. We use state-of-the-art grinders for grinding knives. Knives are grinded with special angles that we have tested and can be recommended for the most appropriate use. Parameters of grinding knives and saws We grind knives up to 4500 mm, circular knives and saws up to 600 mm. We grind all kinds of steel and hard metal (HM or TC). Your knives are ground by specially trained workers on the latest machines, we guarantee an accuracy of 0.005 mm to 2.5 m. Collection of ground knives We bind and deliver knives throughout the territory of the Czech Republic. We provide advisory services to our customers, in terms of knife life and their use. Grinding knives - grinding dies and special punches tools.

Angles Schmale decorative angles and other ornamental angles are design elements which help to underline the special style of your products. The angles are available in various shapes and for different functions – naturally in a wide range of materials and surface options. Should you have additional questions or special requirements please contact us » Angles Schmale decorative angles and other ornamental angles are design elements which help to underline the special style of your products. The angles are available in various shapes and for different functions – naturally in a wide range of materials and surface options. Should you have additional questions or special requirements please contact us » Other versions Angles, hangers and corners for various applications Download catalogue page

Vela: the multi-layer beech wood frame is covered by melamine paper. The bed frame is completly made by TSS (Threedimensional suspension system) in TPEE that allow 360° oscillation and an indipendent dynamic effect for each single element. he area is equipped with TSS, and indipendent adjustable suspension system. Firmness adjustment: in the lumbar region the bed frame is equiped with a TSS that allow you to customize the riogidity and to follow the need of the body. Rounded angle: a special rounded angle made in solid wood is reinforced witha a angular pplate in nylon-fiber-glass. The glue used in the construction of the multilayered beechwood has low formaldehyde emission (according the E1). Product made 100% from multilayered beechwood. All Dreamly products can be entirely customized by the customer: measurements, features, materials and finishes.

GM-JX-V is not the normal and traditional load cell junction box. In addition to regulating the wiring function, it can compensate and correct the four-angle deviation by adjusting the resistance value of the precision potentiometer. On some special weighing occasions when the angle deviation is so large to affect the measurement results, this junction box can effectively solve the user's problems.

Each of the Genject brand blood gas syringes is designed with Electrolyte-balanced Dry Lithium Heparin to ensure analysis safety at reference product level. Thanks to the Dry Lithium Heparin it contains, it allows the pH, PaCO2, PaO2, SO2, K+, Na+ and Glucose values ​​in the blood sample to be measured in a healthy way. Electrolyte balanced dry heparin, 22g 1” needle sharpened at 5 angles specially designed for arterial studies, specially designed membrane filter that prevents gas leakage 100% while allowing gas escape, safe Luer-Lock locking head and needle safety cube provide its users with a unique comfort and safety. provides trust. Blood Gas Syringe Simple Each of the blood gas syringes bearing the Genject brand has been designed to provide analysis safety at the reference product level. Genject brand blood gas syringes contain NA, K, CL and ionized CA balanced Dry Lithium Heparin.

ROTARY TILLER is a tillage machine that mixes the soil with the help of horizontally rotating hoes. It is used for preparing the seed bed. The rotary tiller is a tillage machine which fully crumbles the soil. Since it turnovers the soil; it causes mixing the plant wastes into soil homogeneously. Special blade angles enable tilling with faster speed even on the hard clods. Rippers in front of the machine ensure easier tillage even in harder soils. The roller ensures a flatter soil surface while working. -Universal 3point CAT II Linkage -1 3/8’’ Z6 Spline PTO Protective Shaft -540/750/1000 rpm Gearbox provides (2150/2400) min151 max343 (2650/2900/3150) min150 max325 Rotor Speed -8 mm thick high quality blades+ -Cage Roller -Roller Adjustment Kit -Transmission Set with Robust Gears -2/4 Rippers -Removable CE Safety Guards -48/54/60/66/72 blades; 6 blades per flange; 3 blades on side flanges.

The INDIGO 120R ice auger blades fit the INDIGO 120R ice auger with clockwise rotation. The semicircular shape ensures easy and smooth dry ice drilling with minimal effort. A special and precise sharpening angle makes it easier to drill through the dry ice. Due to the 5762 HRC hardness, the blades can be resharpened many times without losing their original properties. Advantages of our blades • The blades are manufactured on the hightech Italian grinding equipment MVM “La 500”; • Due to the finishing grinding operation, the blades are perfectly sharp and keep sharpening for a long time; • The blades are treated with the special protective compound.

The ICEBERG ice auger blades fit Tonar ICEBERG ice augers with clockwise rotation. The semicircular shape ensures easy and smooth dry ice drilling with minimal effort. A special and precise sharpening angle makes it easier to drill through the wet ice. Due to the 5762 HRC hardness, the blades can be resharpened many times without losing their original properties. Advantages of our blades • The blades are manufactured on the hightech Italian grinding equipment MVM “La 500”; • Due to the finishing grinding operation, the blades are perfectly sharp and keep sharpening for a long time; • The blades are treated with the special protective compound.

ROTARY TILLER is a tillage machine that mixes the soil with the help of horizontally rotating hoes. It is used for preparing the seed bed. The rotary tiller is a tillage machine which fully crumbles the soil. Since it turnovers the soil; it causes mixing the plant wastes into soil homogeneously. Special blade angles enable tilling with faster speed even on the hard clods. Rippers in front of the machine ensure easier tillage even in harder soils. The roller ensures a flatter soil surface while working. -Universal 3point CAT II Linkage -1 3/8’’ Z6 Spline PTO Protective Shaft -540/750/1000 rpm Gearbox provides min150 max325 Rotor Speed -8 mm thick high quality blades -Cage Roller -Roller Adjustment Kit -Transmission Set with Robust Gears -6 Rippers -Removable CE Safety Guards -78/84/90 blades; 6 blades per flange; 3 blades on side flanges.

Which purpuse are MAFEX-Silage sprayers used for? Mafex-Silage spraying systems ares used for application of liquid silage support agents directly during chaffing. How and where should a MAFEX-Silage sprayer be assembled? Atomisers are installed in protective tubing at an appropriate location with an adapter suited to the chopper. The atomiser cannot clog thanks to its special design and installation angle. On John Deere choppers installation by the accelerator, for example, takes place so that plant parts are evenly covered by the droplets as they are discharged. On the other hand and depending on the year ofmanufacture, atomisers on New Holland choppers are installed near the feed rollers or, likewise, by the accelerator. As a rule, installation is possible on any chopper (e.g. Claas, Krone, etc.). Stationary installations on conveyor systems, for example, are also possible. Advantages Optimisation of the silage process Minimum application volumes Optimal distribution of active ag

Our ABS-Lock Falz-H anchorage point (anchor/lifeline system) was specially designed and approved for angled standing seam roof surfaces. This anchor comes with a round base plate which optimally distributes any ensuing force; the base plate itself is equipped with an integrated seal. The sliding properties of the roof are retained even after installation. In Germany: Please observe the installation instructions provided in the "abZ" (national technical approval: Z-14.9-822) EN 795:2012, A + CEN/TS 16415:2017 Designed for standing seam roofs (manufacturer-independent) OSB: Min. 22 mm Wood: Min. 24 mm Can be installed through a vapour barrier / waterproofing Installation set included

Right-hand cutting reamers with adjustable blades and with extra long cylindrical shank with square. Cutting edges with the unique Hunger special grinding (progressively increasing clearance angle) ensure a soft and smooth cut. A guide bush, which can be supplied in addition to each reamer size and which is pressed against the valve seat during reaming, facilitates handling and enables optimum accuracy. (see leaflet) The blades of the reamer are made of special steel, which is characterized by particularly good edge retention. In the "hard chrome" version, the blades are also hard chrome-plated. The hard chrome layer is characterized by high hardness and low coefficient of friction. Reamers of the "hard chrome" version are therefore particularly suitable for reaming materials with a high wear effect and materials that tend to stick and form built-up edges.

The optical contact angle meters of the OCA series are high-precision measuring systems for the characterisation of interfaces and surfaces. They combine high-resolution optics, pinpoint liquid dosing and precise sample positioning to create powerful, reliable measuring systems. The special model OCA 25-PMC is based on the OCA 25 standard model. With its high-pressure measuring chamber, the special model OCA 25-PMC offers the possibility of carrying out measurements of interfacial tensions and contact angles under high-pressure of up to 750 bar and at temperatures between -30 °C and 200 °C. This makes the OCA 25-PMC the ideal solution to investigate, for example, the interfacial tension between a surfactant solution and crude oil in reservoir conditions. It is also possible to determine the contact angle, for example, between rock, oil, and surfactant solution.

The optical contact angle meters of the OCA series are high-precision measuring systems for the characterisation of interfaces and surfaces. They combine high-resolution optics, pinpoint liquid dosing and precise sample positioning to create powerful, reliable measuring systems. The special model OCA 25-HTV is based on the OCA 25 standard model. It is suitable for measuring contact angles at high temperatures of up to 1800 °C and in a vacuum of up to 0.00001 mbar or in an inert gas atmosphere. With an optional dosing system, the OCA 25-HTV can also be used at room temperature for all standard analyses such as the determination of surface energy and the measurement of interfacial tensions.

Digital Inclinometer 54 mm, resolution 0,1° without Vial Special angle alarm Function of the inclinometer Tilt direction pointer Displaying the display automatically always upwards Magnetic base made of stainless steel Toggle between degrees and percent tilt Absolute / relative measurement Holding the measured value Measuring range: 4x 90° Resolution: 0,1° Battery: 3x 3V CR2032 Operating temperatures: 0°C - 40°C Relative humidity: 40% - 80% Dimensions: 54x54x21mm This product is replacement for model 5017-8 that is no longer manufactured.

Jaw crushers are the type of crushers used to reduce big-size rocks by compression, i.e. by mechanical pressure applied by two jaws of the crusher. These crushers are used as primary and secondary crushers in crushing plants. Jaw crushers are mostly preferred crushers because of their ability to crush all kinds of materials of any hardness. Our jaw crushers assures low and easy operation & maintenance cost. Our range of jaw crushers includes 6 different types of Primary and Secondary jaw crushers from 610 x 380 mm type to 1300 x 1100 mm mouth opening. The high performance, reliability, durability and user-friendly adjustment mechanisms of our jaw crushers due to their high flywheel speeds, jaw grabbing angles, special geometries of their pits with safety plates and rear blocks provide unique operating advantages to its users.

Angle head ≠ 90° - with fixed angle Machining: special machining at fixed angle Optional: with IC

Allround drill with quiet operation for machining of composite materials such as CFRP and GFRP in the diameter range Ø 0.20 to 6.00 mm. Advantages: Good surface, no delamination and fiber projections, low vibration, ideal for trimming, especially for dry machining suitable (low heat) For advanced materials such as carbon, carbon fiber, glass fiber (fiberglass) with multidirectional and unidirectional fiber orientation Specials: Point angle 90° and extra thick Diamond coating

EF-PLUS 30 screws are just made for perfect assembly for thermoplastic material with special 30 degree thread angle.