Steam cleaning industry - Import export

Clean Steam, clean steam, culinary steam or pure steam, maybe one of these terms sounds familiar to you. Never heard of it, and do you work in the food pharmaceutical or chemical industry? Then it is especially important to read the following information. On this page we briefly explain the difference between different types of steam. That can make all the difference for a safe end product. Steam is an extremely widely used product in many different industries. For example, most of our customers in the food industry use steam in the production process where it comes into direct contact with their food product. For example, soups and sauces are heated by the direct injection of steam. In this case, the quality of steam becomes important. There are different types

WIWOX® Spintec top loader spray chamber washing systems are the solution for fast parts cleaning in maintenance! The parts to be cleaned are placed in the washing basket of the system from above. During the washing process, cleaning fluid is sprayed onto the parts from below, above and from the sides. The basket rotates inside the machine, resulting in an even washing result. The detergent reservoir is located in the bottom of the machine and is also equipped with a heater.

WIWOX® VIVERK are single and multi-stage spray chamber cleaning systems for aqueous cleaning, pretreatment and degreasing of tools and parts. Loading takes place via an extendable platform, which can be loaded at an ergonomic working height. The workpieces are mechanically cleaned by means of pump pressure in the spray chamber process. The temperature-controlled washing liquid is sprayed onto the workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Single and multi-stage spray chamber washing systems for industrial cleaning and degreasing of tools and parts. Loading takes place via an extendable loading platform at ergonomic working height. Before cleaning, the loading basket is loaded and moved into the rinsing chamber. The individual stainless steel washing nozzles can be easily maintained and adjusted according to the application. The motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

Detergent and cleaning spirit for cleaning dirt stains. When quick drying is required after removal. For cleaning dirt stains on carpets, removing grease stains from textiles and upholstery, degreasing plastics, stones, tiles and metal where quick drying is required after removal. Suitable in industry and trade as a thinning, cleaning and degreasing agent and for thinning synthetic spray paints. Other sizes available on request

The Tuna Fish Steam Cooker is expertly designed to refine the production process for tuna, focusing on increasing total fish yield through precise thermal gradient control and moisture content preservation. This ensures the fish remains moist, facilitating easier cleaning post-cooking. Tailored for flexibility, it offers adaptations for client-specific trolleys and the option for cooking without vacuum, enhancing its utility in diverse processing environments. Remote support capabilities allow for diagnostics and adjustments via PC and Ethernet, ensuring seamless operation and troubleshooting. Constructed from high-quality stainless steel AISI 304 L, the cooker is built for durability and hygiene compliance. Key features include a fully automatic cooking cycle, options for time or temperature-driven cooking directly in the fish's bone, and advanced process control via the latest generation PLC with exclusive tuna cooking programming. Temperature monitoring through thermocouple

Steam is a pressure vessel manufactured to store excess steam or waste vapors out of the operation of aquaria and to be used again when necessary. They are mainly used in gas concrete installations especially for the purpose of recovering the waste steam from the process. There are water and vapor phase zones in the steam chamber. The volume is 4/3 water phase. Steam The steam is stored in the battery in the hot water phase by injecting the steam into the water by means of the diffusers located below the water level and dissolving it in the water. When the steam is needed, the pressure of the hot water is lowered and the steam produced by the resulting phase change is transferred to the process to be used again. Using a steam bath; Up to 25% energy saving is achieved. They can both discharge steam and discharge at the same time. Suspended solid materials which are dragged together with the steam collapse under the liquid and the bluff is removed from the environment and the steam is

Steam boilers with water pipes are boilers in which the water circulates and evaporates in the pipe. This high-capacity, high-capacity, high-capacity steam boiler. The combustion chamber is surrounded by a pipe-pipe-pipe joint. As a fuel in water pipe steam boilers; They use solid fuel, liquid fuel and gas fuel. n terms of safety, the water is more secure due to circulation in the pipes. Because of their lower water volumes, they are boilers that enter the regime more quickly.

They are high-quality steam generating equipment used in all industrial plants to obtain steam required for processing. Steam boilers with flame smoke pipes can be produced as flat ashtrays and hot ashtrays. Solid, Liquid and Gas fuels are used as fuel type. Eralp Makina Kazan In 2005, it is proud to be the most productive employee of Turkey with double economy working with natural gas (total system efficiency = 98,4%). Yield tests of our product produced by Yildiz Technical University and ISKAV Foundation.

Thanks to large contact surface of water with smoke pipes, high operational safety and longer boiler life are guaranteed. The small water volume provides a better inside circulation and safe heat transfer with faster steam generation time. Increased strength and flexibility with corrugated furnace that is manufacturing by Eralp in 900°C degrees. In 3-pass Shell boiler design, the heat load of furnace is less than 1,2 MW/m. The result of this design is an ideal combustion with less NOx emissions, thus it causes lower fuel consumption. Further gains in efficiency can be obtained by using economizer for feeding water by preheating and air-heater for combustion air heating. The energy of flue gas can be recovered and the efficiency of boiler system is increased 5-8%. According to pressure of boiler, efficency increase up to %91. Eralp manufactured the highest efficent boiler (totally efficiency=%98,4) with two economisers which efficency tested and approved by Notify Body.

Heat exchangers, tanks, containers, boilers, metal structures, pipelines, etc. are complex, so the most effective way to clean them is by using equipment with exceptional power. Our company has high-pressure cleaning equipment with working pressure of 1000 bar (193 l/min). These and similar technical parameters also apply to other industrial cleaning equipment operated by our company

The wet medium is sprayed through nozzles onto the surfaces of the parts. Particles are removed from the parts by kinetic energy, and then washed away. The cleaning result is primarily determined by the position and shape of the nozzles, the spray pressure and the volume of media applied to the parts. In industrial parts cleaning, the surfaces are then normally rinsed and dried.

The Semi-Automatic Cleaning Machine is designed for fully automatic robot manufacturing lines. This machine features an automatic opening and closing door. The workpiece to be cleaned from oil, coolant, chips, and other residues is loaded and unloaded by a robot. The cleaning process is semi-automatic. Inside the processing chamber, is placed an air gun as well as a spray gun. The workpiece table can easily be turned by hand to reach all areas of the workpiece. This machine performs soft cleaning by circulating the cleaning fluid in the process tank and rinsing and drying the workpiece. Select from a range of different programs to provide the best cleaning results.

Stainless Steel Body High Pressure Pump Test Report Printer PLC, Android Temp. Control Water Level Sensor Timer, Alarm Water Filters(10 and 100 micron) 100 Lt Tank Manual Door Hot Dryer CE Electric Panel All Apparatus included